D16 EBAY TURBO KIT- STOCK ECU NO TUNE!

In this video I take a stock EK Civic with a D16Y4 non vtec and fit up the most common eBay turbo kit no injector upgrade no ecu upgrade no fuel pump upgrade
** THIS IS SOMETHING I DO NOT RECOMMEND! **
WEBSITE LINK spoolup.com.au/
If you would like to support the channel I have started my own website / online shop spoolup.com.au
I have all the best car parts for your build and merch available for you to help support the channel and save you heaps of $$$$
check out my channel here -
www.youtube.co...
Shout Out To The Channel Supporters
RACEWORKS
PROTEX Brakes
T7 DESIGNS
MAXPEEDINGRODS
COMPLETE AUTOPAINT SPRINGVALE
BURSON AUTO PARTS SPRINGVALE
Below are my past & present builds
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan BUDGET KSWAP 275kW
*2012 Honda Accord Euro K24 CU2 140kW Tuned
*2003 Honda Accord Euro CL9 Track Car AKA RHONDA 140kW Tuned
*1987 Holden VL Commodore Turbo Resto Mod Build
*2000 Honda Civic EK D16 N/A SOLD
*1995 Honda Civic EK4 B16A VTEC SOLD
*Toyota SW20 MR2 SOLD
*1990 BMW E30 318 M54B30 SWAP

[@TURBOTRISTO]

💛💛💛💛 spoolup.com.au/

[@GreenBeamGlockCassarole]

Doesn’t want to blow it up then proceeds to redline it several times lol

[@TURBOTRISTO]

Full send my man

[@fancykat9940]

@@TURBOTRISTO You can use the lack of a tachometer as an excuse to bang the limiter lol

[@TURBOTRISTO]

@@fancykat9940 bang it all night long

[@fancykat9940]

@@TURBOTRISTO from one Civic guy/owner to another

[@Idiotstryingtobeprofessionals]

You could run that on fairy dust and rag the fook off the limiter all day and night.

[@adamdesjarlais8183]

The check engine light comes on as a shift light on the civics without a tach. Yes it is a thing. Get a map sensor block plate. It will close when boost hits so the ecu doesn't blow codes. Turning up your fuel pressure does give you extra fuel each time the injectors pulse.

[@TURBOTRISTO]

Thanks for watching man

[@danielkennedy9152]

Guage and a adj fpr 😅

[@zacchin4528]

THIS IS THE CONTENT IM HERE FOR

[@TURBOTRISTO]

Good to hear what do you think? This was 2 hours of film hacked down as much as possible I tried to stay exactly to the point

[@eyoboyeegaming1187]

@@TURBOTRISTO thank you for this informative video! I am definitely not getting a rev9 Kit now! I’ll make my own kit out of proper parts! I might only really get an intercooler kit for the car.

[@TURBOTRISTO]

@@eyoboyeegaming1187 that will be the best course of action

[@dw8730]

@@TURBOTRISTO For the map sensor issue. Run a missing link. That’s the old school way.

[@TURBOTRISTO]

@@dw8730 I have heard that thank you

[@Alex-di8ti]

This is the most informative videos on one of these infamous turbo kits. So moral of the story is avoid ebay kits and purchase something that will be more expensive but will be of a much higher quality

[@TURBOTRISTO]

Yeah mate you are right for sure, I still believe you can turbo your civic on a budget , I just think these ‘kits’ although close enough aren’t ever really right, for the level of headache required to make them work and the extra unexpected costs, it’s better peace of mind just to piece together the parts yourself so if they don’t fit you can only blame yourself 😇😁🇦🇺🇦🇺🇦🇺🥰 thanks for your support my man , very wise words

[@summ-tinng-wong]

If you use a ebay kit replace the parts known to fail. I bought a ebay kit replaced the blow off valve, Waste gate, fuel pressure regulator and boost controller. Ebay turbos are good but you can very easily get a shitty one. My car is built for 500hp on a ebay turbo and intercooler piping. Ive seen multiple cars here make 500whp on Ebay kits.

[@gti5700]

@@summ-tinng-wong so you basically kept only the turbo, intercooler and manifold from the kit?

[@TURBOTRISTO]

pretty much

[@DJV94022]

Ebay kits are only used to give you a demo.you have to upgrade to branded parts as you go..

[@ptownalex5631]

I could hear just a bit of spool in higher RPM

[@TURBOTRISTO]

Yeah the tiniest bit don’t worry I will be fixing this issue we have tracked down a fire ring for the waste gate so boosting will get sorted

[@that_gli_kid7949]

This is the best how to video ive ever seen💯 answered all my questions i had very good!

[@TURBOTRISTO]

Omg man that’s so good to hear positive feedback ! I will be doing more turbo D series stuff again very soon

[@nitrogearaustralia3949]

totally the best how too install a turbo kit video on the net

[@taylorvaughan1595]

everybody following this is ignorant as fuck! its only a honda get your shit together!!!!! fake wanna be assholes!

[@taylorvaughan1595]

@@TURBOTRISTO you dont and wont do d series shit!

[@taylorvaughan1595]

@@nitrogearaustralia3949 you know this dude dont u and he askd u to say that shit? this is bullshit any honda guy knows this shit down to the .001

[@aznboiitelldem]

I don't even own a civic, but I watched the whole video anyway haha. Awesome step by step video and you explain everything perfectly

[@TURBOTRISTO]

Thank you soo much

[@klikboers]

This is the sort of relaxed chaos I'm all about. Subscribed so I can review when I encounter the same problems on my own build

[@TURBOTRISTO]

Thanks man, that is awesome feedback

[@alexchau8058]

This is the content we all strive for, keep up the great work.

[@TURBOTRISTO]

There is heaps more coming mate subscribe if you haven’t yet I have 7 Honda turbo builds going on over the next few months

[@adorno1010]

oil coming fromt the front of the turbo is due to the 2nd plate you put on there for the oil line. it needs to have a pin size hole or it will flood the turbo with oil. wastegate needs a fire ring which is why it was open at idle, reason for it not boosting. in my opinion. good video

[@TURBOTRISTO]

It does it has a built in pin hole restrictor 😇

[@canton7180]

Speaking from experience Honda’s are the easiest to boost the right way because of the affordable tuning interface with hondata, other makes require new harnesses and dedicated aftermarket engine management, but seriously rule of thumb it is always smart to rebuild the short block and rotating assembly and install forged rods and pistons, mls head gasket and arp stud for good clamping force, colder plugs, injectors and fuel pump, that is the minimum or you will vent the crankcase with a rod -you will always want to push the boost up so you might as well build the engine accordingly

[@TURBOTRISTO]

couldnt agree more mate

[@jeffreyfast4559]

‘Wohan War Whistle Spinney Boy’. Perfect name for a turbo! Great video, thanks!

[@TURBOTRISTO]

You are welcome Jeffrey

[@malloymotorsports780]

wait, wait.... do you have an automatic garage door with no garage..... that's badass

[@TURBOTRISTO]

Haha yeah man lol I’m glad you like it

[@YerBrwnDogAteMyRabit]

Nice observation. I'm a fan too.

[@not4boomers489]

I like how he says "BAMPA" (bumper)

[@TURBOTRISTO]

Lol it’s bumpah

[@meroalvarez2601]

lmfao

[@aydengoldsberry5721]

I love that garage I love how it’s not really all closed up but there’s a roof and a garage door cheers from Texas!

[@TURBOTRISTO]

Haha thanks bro we call it a carport here in Aus

[@labanane3129]

Lol”held up by hopes and dreams” I honestly had to drop the like right there 😂

[@TURBOTRISTO]

Thanks bro haha I appreciate your support please subscribe I have hundreds of Honda vids and I did a decent job turboing my own ek ( if I do say so myself)

[@sdaafasfad]

Quite fitting... As the Honda slogan actually is 'the power of dreams'. And this guy is making those dreams come true in this video 😁😂

[@FutureBoostedMedia]

4 minutes into the video, never watched one of your videos before but I'm already loving where this is going. Your loud and clear very well spoken. time to finish the video now.

[@TURBOTRISTO]

Thanks man please subscribe trying to hit 10k I have a lot of turbo projects now this video is almost a year old

[@tylerb3023]

It’s the accent lol

[@kevinrtres]

Great video! Thanks! From the web - I've only seen *ONE!* turbo kit that actually works straight out of the box without ANY mods whatsoever. It's also a pretty expensive kit which simply reinforces the saying - *_You get what you pay for!!!_*

[@TURBOTRISTO]

thanks kevin!, your exactly right thanks for watching

[@uru-freemind7711]

Without tuning the ecu, what you could do is place larger injectors 85% 100% + flow to run on gasolie and also a pump with a higher flow, disconnecting the vacuum intake from the fuel pressure regulator so that the pressure does not have variations, cold sparks. 10 psi boost stock internals

[@TURBOTRISTO]

Thanks bro

[@uru-freemind7711]

@@TURBOTRISTO thanks to you, very good channel, there I edit it to the comment for more safety of the knock

[@jasonjean3485]

10 psi on stock internals??

[@uru-freemind7711]

@@jasonjean3485 Yes, on inyectors big 85% or 100% more flow, cold sparks and 25 spark advance degrees at full rpm

[@jerrybartlett1142]

​@@jasonjean3485 for what 10 k

[@ZayedGR]

crank the fuel pressure up and give it little timing by moving the distributor

[@TURBOTRISTO]

If it was mine I would, first step is to get a better waste gate and get the exhaust sorted then it will be fuel pump see how it goes .... it also needs new plugs

[@shawny4220]

Screamer pipe through the hood is only jail time if they catch you😉 Lol it's illegal in my country too....such a bummer

[@TURBOTRISTO]

Yeah I know it would be cool

[@jonthecowboy]

I love seeing Honda’s here in the US that sound like that and always used to try and race my 8th gen si and just putter behind me(stock car). There is a turbo one in town most likely no tune could never get me at a green light

[@TURBOTRISTO]

That’s soo cool man thanks for watching I appreciate your support

[@djhartbeatnofilter]

Heard some decent turbo whistling while hitting 3psi......*Clicks tounge....NOICEEE

[@TURBOTRISTO]

Hahaha I love that meme

[@sergiomclovin672]

You can get DC2R equivalent calipers, discs and pads from Accord, Legend etc. There are plenty at Imlachs on centre road. Bolt on a booster and 1" master from a prelude, the thing will stop like you wouldnt believe. I can show you the bswap EK sedan I built for my little brother, you can make these things handle better than anything you've ever driven.

[@TURBOTRISTO]

Yeah man 100% check out my own personal car

[@hisheeelijah1482]

Post about it then

[@Brock_Landers]

When I first bought my 97 EJ8 Civic coupe it had a JDM D15B VTEC block with a D16Y7 head (non-VTEC) and it was "running" on a P2P ECU (D16Y8 VTEC manual). I put a D16Z6 head (92-95 1.6L VTEC) on it, an eBay turbo kit, and I used an OBD2A to OBD1 step-down harness, and I used a P28 ECU (92-95 Civic 1.6L VTEC manual) that I socketed and chipped with a Xenocron kit and basemap for my setup. I also ran Mitsubishi Eclipse 440cc bluetop injectors. It was SO much fun to drive and pulled hard enough on 8 psi to beat modified WRXs and Mazdaspeed 3s. Not bad for a car that I had roughly $2000 into. I also had an AEM wideband to monitor air fuel ratios. Oh, and I still own that same car and it currently has a fully built LSVTEC turbo in it and it currently makes 612 whp.

[@TURBOTRISTO]

Damn son what a beast ! That would fly you will love the next build video out on Monday

[@Brock_Landers]

@@TURBOTRISTO I can't wait buddy!

[@waydemorris1451]

I'd say a lot of the turbo issue would be due do not having the oil restrictor, to much pressure causing it to be a lot harder to spin

[@TURBOTRISTO]

It was actually leaking from the wastegate check out part two of this series

[@DatlBear]

@@TURBOTRISTO Was about to say this than saw you replied :D great catch

[@MrStinky2011]

Dude, love your channel. I'm glad I found you on the FB forum. Keep the content coming! Cheers from Ontario, Canada!

[@TURBOTRISTO]

Wow thanks so much aussies love Canadians , very similar cultures! Thank you for watching and subscribing you legend!! I have heaps more things coming in the new year !

[@sergiomclovin672]

LOL thought this looked familiar, you were driving around Noble Park just round the corner from me. Im a mechanic do a lot of Hondas, worked on Nissans for years if you want a hand hit me up

[@TURBOTRISTO]

Haha thanks bro yeah it’s me lol check out my build on my own car

[@masjuggalo]

I feel the intercooler deserves a little credit I mean you had to chop up the plastic bumper cover but the actual part that takes the impact survived. I feel like a check valve for the map sensor so it only sees 0 vacuum and it seems tonwork good for under 7psi

[@TURBOTRISTO]

Yeah true

[@mpiloz8016]

Engine cuts when you're running stock ecu, mine did that before switching to a standalone ecu, It would go into a sort of limp mode, also running stock fpr with a 400lph pump. The ecu will make all the difference.

[@TURBOTRISTO]

Yeah I agree, I have everything done to my own car this was for a local guy that wanted me to fit it all up for him

[@lilmeatevan]

What ecu should I buy I’m getting the civic with d16 no vtech and plan to put a turbski on it . Should I run upgraded injectors and all that hood stuff

[@TURBOTRISTO]

@@lilmeatevan yes mate most defiantly and fuel pump, ecu depends on budget research what’s available in your area and who can tune it

[@JACEVIDEOS]

Yarraman station!!! hahaha nice to see someone closeby. Great video man, in the process of turboing my car aswell.

[@TURBOTRISTO]

@@JACEVIDEOS good stuff man thanks for watching

[@bertaboosted8839]

Hell yeah 🤟🏼 I pieced together my own kit for my 240. A lot more expensive to do it that way but at least you can pick an choose

[@TURBOTRISTO]

That’s soo true

[@pablomarquez4431]

Also my Gauges were the same. I swapped out my cluster with a ex so I can have a functioning tach. Plug and play.

[@TURBOTRISTO]

great work Pablo

[@boostedadrenaline2884]

Amazing I'm gonna buy a cheep cheap civic and try this with fuel supplies ecu and a map for you about 212bhp no more just a side project

[@TURBOTRISTO]

Excellent let me know how it goes bro

[@SoW-CE]

Did you tryed it? And its still running?

[@SalesTaxin]

You can turbo just about anything without tunes and fuel pumps and injectors etc.. the only probably is if you try and shortcut all that stuff the car is either gonna run like crap or the motor is gonna blow.. getting tunes is to preserve the motor and make it perform at its highest level possible and make sure everything is where it should be degrees of timing, afrs, fuel, etc. so to answer the question yes you can turbo something stock.

[@TURBOTRISTO]

100% bro

[@waynelatt9216]

oh nice to see my house in the video LOL ill keep an eye out for your ek bro!

[@TURBOTRISTO]

haha cool, thanks bro, Ill be moving soon but yeah a couple more test runs between now and then you might see your house on KZbin again soon

[@TrueSucrose]

with older cars its actually hilarious how well they work i had one on my 4ze1 in a holden rodeo and was told going up to 12 psi on a stock ecu is perfectly fine due to your not actually running the turbo to input more air your just counteracting the vaccuum that the engine creates

[@TURBOTRISTO]

Exactly

[@Yuaaaur]

Don’t forget me bro when u get big, I was one of your first subscribers, still remember the old vids about the 32

[@TURBOTRISTO]

I won’t bro, I’m a pretty humble guy my circle will always be the same size only my cars will change 😁

[@riffcover9000]

I've never seen any of your videos. But I already know you're a problem solver at heart

[@TURBOTRISTO]

I try to be mate, great insight thanks for watching

[@kostassofroniou7068]

When I saw the screamers position I was like...... OUT THE HOOD IT GOES

[@TURBOTRISTO]

I wish bro it would be sick

[@STREETMACHINETV]

Congrats on your first million view video. Well done mate!

[@TURBOTRISTO]

Thanks heaps :)

[@bigmac7228]

Man I'm not gay but I love you lol. This is the raw shit I like on youtube. Peace from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@TURBOTRISTO]

Haha thanks man!!! This made my day you funny bastard

[@markhingst5368]

im with you boys - no homo

[@bigmac7228]

@@markhingst5368 😂👍

[@eyobin2]

No lube....

[@bigmac7228]

@@eyobin2 straight in son

[@Coltondk]

If I remember right, set the FPR base pressure with the vacuum line off.

[@TURBOTRISTO]

Great tip

[@Kenny-bm9lf]

Did the same years ago need a check valve at map, block egr,and head studs...happy boosting

[@TURBOTRISTO]

Thanks for the kind words Kenny, please consider subscribing big things coming on the channel

[@BerwickMitsubishi]

THIS VIDEO IS EXPLODING!! KEEP UP THE FANTASTIC WORK YOU LEGEND

[@TURBOTRISTO]

Thank you for the support

[@alangutierrez7795]

@@TURBOTRISTO this is the only video that clarified all my questions, the more I see it the more I learn, greetings from Mexico 🇲🇽

[@TURBOTRISTO]

@@alangutierrez7795 greetings from australia my man!! Thank you for the support 🇦🇺🇦🇺❤️❤️👌🏽

[@CMGDMovies]

Hello, please rebuild my vr4 engine Mitsubishi man 🤣🤣

[@TURBOTRISTO]

@@CMGDMovies I love me some 4g63 action

[@maylnwood]

I'm thinking of putting an air fuel gauge on and then turboing. Maybe able to hack In and adjust either the fuel injectors or timing advance some how. As long as you don't run it lean you should be okay and then keep it low boost to be on the safe side

[@TURBOTRISTO]

awesome man keep me posted

[@mattflang-te5om]

Yes, turn up the fuel pressure till it dies at idle and back it off a little, it’ll run and make boost, did this back in the day.

[@TURBOTRISTO]

That’s awesome Matt

[@JuanSumChninezeFue]

Just watched the other guys with an electric turbo, and they added high octane fuel into the car to get it to stop predetonation, essentially increasing HP.

[@TURBOTRISTO]

That’s pretty cool

[@conandog3514]

In highschool, wishing to get a civic. Love watching your videos man. I've learned quite alot.

[@TURBOTRISTO]

That’s awesome dude civic is a great first car

[@TURBOTRISTO]

Sorry meant to write AWESOME

[@soctierayun3945]

Seen your car the other day and I just had to say love your build man, sounds really nice in person and definitely has me thinking of doing the turbo swap for abit of fun for myself!

[@TURBOTRISTO]

Appreciate it! where did you see my black sedan ?

[@TURBOTRISTO]

that would be cool man

[@wonderors]

Go to a junkyard and get some old supra 550injector with it's connector clip and a 90s accord resistor. It should help getting more fuel.

[@TURBOTRISTO]

Nice only issue is we don’t supras in our junk yards ever

[@Sour.B]

Maybe in the video you should include testing the oil feed line works & priming the turbo (just pulling the oil feed off the turbo and starting the car with the distributor not connected is the easiest way you can check I think?) Something so simple but can take a good away a good chuck of your turbos life if not done correctly :)

[@TURBOTRISTO]

yeah I know about this method only really neccissary if its a fresh build with a new oil pump, this method is proven and we know the oil pump works, maybe I should have done it for the camera but i assure you there is oil pressure, the turbo spinning is more because there is no lubricant in it and the bush bearing needs to bed in, it spins like a mofo after a few hours

[@ianhowe007]

I should do video on my car. D16z6 with prelude injectors stock ecu fmu 255 pump e85 runs awesome

[@TURBOTRISTO]

Where are you based?

[@gtamodder-dy9mb]

27:57 I think I may have spotted the issue with low boost you still have a vacuum line going from intake to rocker cover so therefore you are positively charging the crankcase

[@TURBOTRISTO]

Thanks for the input my man but it’s actually not rocker cover goes to the catch can everything else is blocked off it’s just a bad waste gate that didn’t come with a fire ring

[@canton7180]

@@TURBOTRISTO yeah it should not be venting at idle, that is a clear indicator that the dump valve is not sealed, it is just like a exhaust valve with a valve seat(fire ring)

[@jamesduffey4442]

That too plus his map sensor is stock and can't read right anymore with the added positive boost

[@TURBOTRISTO]

this video is still pumping thanks everyone for watching don't forget to SUBSCRIBE and like the video thanks for Watching

[@ronyhyper]

I've been watching a bunch of videos, I'm gonna turbo charge my car next week 😘

[@TURBOTRISTO]

Well done man!! I’m glad I inspired you

[@ronyhyper]

@@TURBOTRISTO ❤️❤️❤️

[@TURBOTRISTO]

@@ronyhyper all the best bro

[@kayrams1792]

The long pipe going to the air intake is extending the lag by causing the turbo to work more to produce little pressured air. A turbo piped connected to the intake manifold need to short and narrow to induce physical air pressure at low exhaust output.That eBay turbo will perform optimally at high speed and long distance. My opinion. I stand corrected.

[@TURBOTRISTO]

Cool, thanks

[@PokeSparkz]

this was so helpful. been thinking of putting on a turbo because my d16y8 is built already and use to run 14psi back in its day from previous owner. and i want to return it to its formal glory but i dont want to spend an arm and leg to do it. i just want some 7psi boost noises lol

[@TURBOTRISTO]

I can certainly recomend this kit and doing a turbo conversion but keep in mind this kit still needs to be modified and I would spend my money on a brand name wastegate and some money on better fittings and better external waste gate piping this kit makes the gate shoot flames in the worst possible spot and you will need to take the car to an exhaust shop it will also need good fuel pump and injectors as well as a tune, a stock d16 can handle 12psi all day on its factory internals but a built one like you have will easily hold 20-30psi and be a monster to be safe I would recomend the fuel system and waste gate upgrade and a tune and run about 15psi you and your car will love it

[@alangutierrez7795]

@@TURBOTRISTO what brands for pump gas, regulator of how many bar ? Injector what size ? And what turbo brand to make it worth

[@TURBOTRISTO]

@@alangutierrez7795 you can do this on pump gas but if you have low octane fuel then you need to run low boost

[@keithautumnbrueyfitz]

Love how on the mockup engine he bolts the turbo on backwards .. coming from someone who's owned a 93 eg coupe d16z6 turbo mostly ebay except the 2nd turbo it's on backwards and I had a93 prelude vtec in Britney blue green metallic I also had built and turbo'd that h22 actually came closest deck your best bet is to spend 2k buy a tig welder for 800 US buy the cheapest cast manifold find an audi a6 2.7t turbo and a universal fmic kit and some flanges and for around 2k US u can get a 265whp d16 with rdx 410cc inj. And a used Hondata s300 it may take a week of mock up and fab shit even pulsar has a g2554/28/58 for 549 US now 350 for the used s300 or new crometuned ecu welders 800 manifold and fmic kit is 275 flanges 50/ea. Injectors are 55/ea at parts store so with a brand new balanced billet wheel turbo and components for 2200 US learn how to do some welds and mae some extra money back in the long run

[@TURBOTRISTO]

g'day keith, i do agree with you man, not sure if you noticed the kit kinda forces you to run the turbo that way around, if you check my newer videos i have since turboed several d series k series and other car rb30 powered cars and deisel cars ect. the customer was on a budget and wanted me to install the supplied kit

[@g-mane7497]

U need a check valve for the map for it to see boost on the stock ecu

[@TURBOTRISTO]

Yeah it’s up to the owner now

[@YerBrwnDogAteMyRabit]

"This is gonna be held up by hopes and dreams.." legit LOL.

[@TURBOTRISTO]

Thanks my dude

[@joetroy2904]

If the turbo isn’t spinning at idle, it’s a bad turbo. I put a 70mm turbo on a go kart just for shits and giggles, turbo was as big at the motor. It spun at idle. That also makes the most sense for not building boost.

[@TURBOTRISTO]

Turned out I forgot to put the fire ring in the wastegate

[@matthewglaze5398]

I could be wrong but don't you have to have the boost controller hooked up to the vacuum port of the wastegate and ran to a vacuum source for it to function? Could be why you had basically no boost. Thanks for the vid either way. Keep up the awesome work.

[@TURBOTRISTO]

The waste gate has interchangeable springs that can set the boost to a minimum of 5 or 10psi, I put both springs in to make 15psi minimum boost but still nothing , it turned out I made a mistake by not putting in the fire ring

[@matthewglaze5398]

Good to know.

[@chevyriding4646]

This guy has no excitement in face at all no smile or nun lol dude u just put a ebay turbo on an did all kinds of work to make it fit an stoped the leaks come smile a bit that it's driving around an I bet u could feel more power in it give yourself some credit good job 👏 👏 awesome video

[@TURBOTRISTO]

Thanks bro, I’m not one of the fake excitement KZbinrs haha but plenty of other funny videos on my channel and exciting turbo videos

[@numberpirate]

I imagine extractors are the tubular exhaust manifolds known as headers here in the land of freeDUMB.

[@TURBOTRISTO]

You are correct man

[@overwatch1385]

The MAP sensor read positive pressure and triggered the CEL. FMU and a "missing link" are the only way to run a stock fuel and ecu setup without getting a CEL. Perhaps buy a go autoworks kit, upgrade the fuel system, and get a tune 👍😎👍

[@TURBOTRISTO]

great tips all things i have discovered in the last few years, subscribe and check out my newer videos

[@juancarlosrodriguez6738]

Don't know how I ended up here but this sh is lit 🔥 keep up the good work and don't forget the ones that will be here wen you get million subscribers

[@TURBOTRISTO]

Thanks Juan you the man!

[@VinnyMartello]

I have an 04 Civic with a 1.7 SOHC motor. Ive been flirting with the idea of getting one of these kits. Honestly 6 pounds of boost is perfect. I don't want it to be fast. I just want it to be not slow.

[@TURBOTRISTO]

yeah man do it 6psi is fine - I am making my own kit for sale soon

[@VinnyMartello]

@@TURBOTRISTO Really? Thats cool!!!

[@thunderwolf9775]

I was gonna do this to my 87 Ranger. Thanks for testing it lol

[@TURBOTRISTO]

You are welcome man, you can still do it just order the parts individually

[@BigSteve_Gaming187]

My 92' Honda Hatchback I went 2 the junkyard n got a instrument cluster and PO6 ECU for it. Took the 1.5L out of it and threw in the 1.6L. My buddy N I installed front and rear disc brakes from a 4 door on there n it had a decent wide body kit on it however a 10 point buck here in Wisconsin said I don't like it and full charge through extremely thick brush between 2 fields as I was getting up to 55mph and crushed the whole right side of the car n made it look like a crumpled beer can that got stretched out. The deer kept on going after like a prick....

[@TURBOTRISTO]

wow that is buck wild! lucky we dont get moose's and deer here in Oz

[@BigSteve_Gaming187]

@@TURBOTRISTO I'll take the deer over finding poisonous spiders taking over sections of the vehicles. From that point on I no longer went for liability and have stayed with full coverage from then on out.. 😂

[@TURBOTRISTO]

@@BigSteve_Gaming187 lesson learnt haha

[@chrisgelsthorpe220]

I actually enjoyed watching this, subbed and looking forward to more content like this

[@TURBOTRISTO]

Thanks mate I filmed an eBay coilover video testing last night it’s a bit different you should love it

[@chrisgelsthorpe220]

@@TURBOTRISTO I'll give it a watch tomorrow fella,

[@TURBOTRISTO]

@@chrisgelsthorpe220 hopefully it will be out by then :)

[@YerBrwnDogAteMyRabit]

And "Wuhan War Whistle" is fkn comedic genius too. You got my sub, dude.

[@TURBOTRISTO]

Haha thanks bro

[@northeastrc2725]

I wish they where that clean with that sort of miles on in the uk

[@TURBOTRISTO]

Haha this one is rough man

[@leary1051]

@@TURBOTRISTO ours are abused by takeaway workers or old people

[@TURBOTRISTO]

@@leary1051 hahaha

[@tylertessman3053]

Ok so I'm not a honda guy at all but I love building things that have a potential to be fast so correct me if I'm wrong but the thing that is on top of the exhaust manifold is called a blowout valve right well that seems to me like it is the reason it didn't build much boost I thought bov's were for letting the boost bleed off when you shut the butterfly on the intake side so cap that hole off and add that to the pipe before the throttle body and see if it makes boost

[@TURBOTRISTO]

It’s a waste gate and yes that’s why it wasn’t boosting but all fixed in Pt2 check it out

[@MidnightMarrow]

I definitely heard it spooling but it did seem to lack RPM for sure. Been wanting to turbo an Impala but the money and work involved specially considering like no one does it makes it more difficult lol.

[@TURBOTRISTO]

Sure does man it’s a hard one

[@peter0139]

Fuel pressure regulater: Fuel pessure is still the same after driving, its just the meter which gives the wong information. The meter is filled with glycol, which heat up.

[@TURBOTRISTO]

ahh ok thanks for the tip man

[@scottyknows7234]

I like the content!! I've always been kinda of iffy about the ebay kits. Probably replace that wastegate and get a good tune. Definitely informative!!

[@TURBOTRISTO]

Thanks man I appreciate the support

[@mike9500]

you have to put a check valve inbetween the map sensor and the intake. the oem sensor cannot see boost or it kicks off a liek and will blow the map sensor.

[@TURBOTRISTO]

I made a whole video on that exact thing :)

[@marquezmonterrosa928]

Some timestamps would be great! Great content!!!!

[@TURBOTRISTO]

Feel free to add some, thanks my man

[@pablomarquez4431]

Yes. I've been saying the same thing about those kits. Not good, too big. Im going to fabricate my own. Definitely going to go small. Probably a k03. Hopefully I'll keep my ac with my custom kit.

[@TURBOTRISTO]

I am working on a custom kit that keeps the air con for future, stay tuned it will be available off the shelf soon

[@oforrester82]

ebay turbo kit not so bad.. upgrade turbo and wastewater later

[@buttazgtr]

Im in NZ and i have the 96 lxi hatch with the d16y4 and its got the tacho, good to know wont get an ebay kit

[@TURBOTRISTO]

nice bro, thanks for watching my man please subscribe if you haven't already

[@crawlerhelge]

You need å Y pipe on the wastgate vakum or move vakum hose om top of wastgate

[@TURBOTRISTO]

I thought that but after checking the factory specs on the gate I just set it up the way they recommended

[@crawlerhelge]

@@TURBOTRISTO try azz i say and you got the right boost for the springs i use it om all my turbo cars

[@independentassesor2630]

For a Grand, I recon it would probably be the best value for money mod you could do. With a tune, map sensor, injectors and wastegate upgrade this thing would be mad for around 3 grand

[@TURBOTRISTO]

Correct I think you are right mate

[@flandrble]

the manifold is probably the only real thing of value in the kit, maybe the oil lines and tee too.

[@flandrble]

@ByAny Means in this case the only thing that isn't really broken is the manifold :D

[@independentassesor2630]

@@TURBOTRISTO What would be the best value for money kit? I have a 3582r new in the box and a small frame Garrett 4088 /T51R still in the box. Would love to run this system on low boost then drop in my L76 and swap out the heads if the eco

[@stevenbusk539]

I wonder if they used such a big exhaust side on that turbo was to ensure it didn't make much boost/ exhaust flow restriction and blow up? On a 1.6 a T25 would give more boost much sooner I would expect, but at far more risk of engine damage. Personally these days I think I'd just hunt down a nice D16 A8/9 twin cam, and change the cams, exhaust manifold and intake, and add an appropriate chip for a tuned nasp twin cam D16. Those engines are nice for a D-series, 130-135bhp standard and 7200rpm. Should be able to get that to 145-150bhp with much less hassle than properly turbocharging a D16 SOHC for a bit more.

[@TURBOTRISTO]

I run a t28 on my personal car if you check it out on the channel its much better and more responsive I agree with your theory thats why i built mine the right way check it out and consider subscribing mate

[@tafadzwamutizwa9102]

You dint read all the instructions... you are supposed to redline the engine so that everything starts working lol . Great video you answered a lot

[@TURBOTRISTO]

Thanks brother I appreciate it

[@nitrogearaustralia3949]

this is the best how to video on youtube

[@TURBOTRISTO]

i try hard to make great useful videos

[@694069406940]

great video man loved it all ways wanted to no if that would work and so i found out 👍✨🌈

[@TURBOTRISTO]

Not a worry my friend, glad I helped out, thanks for the support!!

[@zachnuketown]

Good ol vortec fmu for me. Ran my 150k mile d16 for over a year at 7psi without issues. Get a aem wideband and send it

[@TURBOTRISTO]

Nice man

[@Iowa599]

Put a boost gauge on the line feeding the wastegate, compare the pressure at the wastegate to the pressure in the manifold. Any boost lost between the turbo & manifold could be a leak or a restriction.

[@TURBOTRISTO]

It was the fire ring man and it was 2 years ago haha

[@christopherreid1666]

Flip the intake side of the turbo to the transmission and you will have all the clearance you needed....ac/and all the other accessories will work the only thing you will of to reroute your exhaust piping

[@TURBOTRISTO]

G'day Chris, I know and I agree with you, this customer was on a budget and only wanted the supplied kit fitted up, and unfortunatly thats how the kit was designed,...... not how i would do it

[@Gunsmoke2220]

I wanna see 323 protege love sometime on the internet 😔

[@TURBOTRISTO]

If you bring it to me and the parts I’ll turbo it for ya my man

[@Gunsmoke2220]

@@TURBOTRISTO haha I'm from trinidad bro, The Caribbean and Australia and New Zealand get and share the same cars, sooo if I could afford that shipping fee no problem but then I'd be better off turboing myself at that point right? 😅

[@elkameleong]

I read somewhere the needle on the FPR gauge fluctuates once the oil in the gauge heats up.

[@TURBOTRISTO]

Yeah someone told me the same

[@aaronbrunelle6604]

Sweet video this is what I've been looking for thanks for all the info!

[@TURBOTRISTO]

Not a worry mate, thanks for the support

[@tbas8741]

Crazy difference to turbo engine compression. Brand new Subaru 2.0L Turbo engine has a MAX compression of 168psi Im glad mine is only down to 155 psi after 245,000km over 23 years.

[@TURBOTRISTO]

Yeah you are not wrong ! Thanks for watching

[@marcushudghton1]

When I install my turbo kit I’m a bit concerned about taking it out to see how it runs as it’s I’ve obviously not got it insured or have road tax while it’s been sat in my garage. Bit worried about getting pulled by a traffic cop with the ANPR cameras...

[@TURBOTRISTO]

Where are you from

[@marcushudghton1]

@@TURBOTRISTO the UK 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@TURBOTRISTO]

what is an anpr camera

[@theinternet8853]

@@TURBOTRISTO automatic number plate recognition

[@TURBOTRISTO]

@@theinternet8853 ahh yeah makes sense we dont have that in australia

[@aaronactive]

Back in the day, we had to custom build this stuff...now you can get kits that at least get you most of the way there lol..

[@TURBOTRISTO]

Yeah they aren’t all bad the important little things are the bits that need upgrading

[@AW11SC]

Happy to see your channel going so well mate!

[@TURBOTRISTO]

Thanks Tom ! I appreciate the support

[@brandonhernandez3654]

Finally someone made a video now that Chris fix doesn’t want to show us

[@TURBOTRISTO]

thanks man please subscribe i wanna be bigger than chris fix haha

[@RedditReaper]

Just wondering, are you not supposed to prime the turbo before running it? You might have blown the turbo...

[@TURBOTRISTO]

Nah mate doesn’t make a difference they don’t prime turbos of any factory cars, let alone a $160 ebay turbo, I’ve never done it and I’ve fitted hundreds of turbos on GTRs/ silvias civics ect

[@sock979]

I'm not going to say that what you've done hasn't worked but I've always primed turbos. But also this is a f****** garbage Chinese copy turbo