507+ ft lbs 430+ rwhp from a 4.0 L V6 2006 Ford Mustang on our Mafia Dyno!

[@jdtv...9134]

Deck height: 8.858 Bore:3.953 Stroke:3:31 Rod length: 5.748 60 degree block

[@automafiaracing]

🕵

[@ifGarage]

Man there’s just something about the sound of the 4.0 definitely doesn’t sound like your typical V6

[@automafiaracing]

Sounds decent

[@CharuzuXVI]

Pushrod v6

[@rannz7]

@@CharuzuXVI This is not a Pushrod V6. Those ended in 2002, This is the OHC 4.0l V6.

[@jakobauger6805]

It's a 60° v6 as opposed to a lot of American v6 engines which are 90° v6's. American v6's are usually 90° because they're based off of a v8, but in Europe they're much more likely to make a v6 for a v6's sake and this motor did start in the European market.

[@Dr.Mcstaby]

​@@CharuzuXVI I can safely say after rebuilding 4 of these engines and working on mine for the last 10years its definitely not a push rod engine its got roller cams

[@strainofhate6283]

Damn, wish I had a shop near me who could play with my 4.0, I’d love to have her make some healthy power

[@automafiaracing]

We prefer the 3.7

[@warrenkidd1786]

@@automafiaracing fifty Fdfuffff TV h

[@ItsManuelc]

Where are u guys located

[@frankkirkman5994]

@@automafiaracing yes but this video is about the 4.0... Why didn't you guys drive the car? Makes no sense to show dyno queen and not one second of drive time¿

[@Angel7black]

@@frankkirkman5994they clearly know what theyre doing in terms of engineering but they love to shit talk the 4.0’s like crazy, despite 4.0’s being about as fast as BRZ’s and Civic Si’s and having similar potential. Theyre not bad, better options but not bad and pretty dirt cheap honestly now days. Good entry level sports cars. Not sure why they get so much hate for their price other than that the GT’s and 3.7’s are clearly better, but also clearly cost most. You can get a decent 4.0 for $4000-6000. Goodluck finding a half decent 4.6 or 3.7 for under $10k. For anybody well into their career year sure get the 4.6, 3.7, or 5.0 if you can afford it. But if you actually want a traditional mustang looking body style and a good entry level sports car for cheap that you can easily get into the upper to mid 14 seconds range with a tune, CAI, gears then yeah, the 4.0 is a great car for that. Basically someone between high school to college range or just struggling a bit financially

[@Str8sixfan]

Count me in as impressed. Didn't think anything outside of the Cyclone (in the v6 mustang world anyway) could pull this off. Wow!

[@automafiaracing]

We were impressed as well!

[@yurei4216]

MyTurboStang what type of kit is that? Also what’s your exhaust set up

[@warpony5654]

@@yurei4216 I think her set up is a powerhouse single turbo front mount system.

[@spoonman8828]

I Finally found a video about a 4.0

[@automafiaracing]

Unfortunately haha

[@neubianx]

rebuilding my 4.0 in my Sport Trac now. Actually a great engine if it weren't for the damn timing chain guide problem. Couple mods I've seen to direct some extra oil to the front, as well as an oil accumulator for pre-start oil. Doing them both, plus an m90 supercharger with 5.5lbs.

[@automafiaracing]

Cool

[@GKWunder]

4.0s sound so good

[@automafiaracing]

They sound pretty decent yeah.

[@jtspider599]

@Ilyas Khan mine gets like 28 mpg that’s a lot

[@Surge246]

@Ilyas Khan I don’t know what “chugs gas” means to you but, I’ve driven v8s and compared to that the v6 is a gas saver for sure!!

[@Surge246]

@Ilyas Khan ah I see in that case that makes sense.

[@pilotguy576]

@@jtspider599BS. Even with just highway driving I cant get above the rated 26 mpg

[@jdtv...9134]

The weekest part of these motors is the timing chains. it actually has a pretty stout bottom end. I have an 05 Explorer however you cannot access the injectors with the intake manifold that is has. I'm in the process of doing a 6266 it'll be install around where the muffler is right before the axle. You have one of these motors and it's completely stock no Port work done to the heads and stock cams might want a 52 mill turbskie. I know the 4.0 sohc & 5r55 trans inside& out. You will also have to update the trans if you wanted the last@ 400plus

[@automafiaracing]

yup

[@rannz7]

I have an 05 with a 4.0l V6 and I plan on doing a 5 Speed swap very soon along side short tubes and a Dry-Cold Air Intake and a tune. I know it's gonna be work and money and time, but i want a 5 Speed and not have to resort to buying another vehicle instead when I only had mine for 4 months now.

[@JjromQ]

Can you give a mod list of your 4.0 stang? I want to build a 4.0 and I aim for 400 whp. Can a stock motor safely handle that for a daily driver application? LAstly are there forged internals anywhere for the 4.0?

[@modmod4895]

@@rannz7 I have a 5 speed 2006 needs body work been sitting water pump was leaking want to sell it

[@nimrodpaul6875]

​@rannz7 I have an o6 5speed and with a whiteline front and rear swaybar kit it's pretty damn fun. I'm in the process of looking for a cai and maybe a Bama tuner with it. Any recommendations on a cai and is tuner worth it highly appreciated

[@WMustangMan]

Damn this stang is still alive?? Man if that's the same car I'm thinking that thing has been turbod for damn near a decade.

[@automafiaracing]

Pretty much forever. Its like herpes it just wont go away

[@nicklikesradio]

@@automafiaracing 🤣🤣🤣

[@automafiaracing]

🤮🤮🤮🤮

[@EarthSurferUSA]

I have a question for you about my car and driving. I have the 2006 V-6 Mustang with 110,000 miles on the engine, and a X-Charger roots Magnuson M90 that I have about 55,000 miles on. It is my old man muscle car (60), because I did not have one in the 70's, (dirt bikes instead. still do those too). I might take it to a drag to see what it can do once, but not my main car and I don't beat on it much. I don't know the maintenance of the blower or how long they last. I think the engine will be OK for a long time though, at least another 100,000 miles. I am making about 340hp at the crank, so you know the stress. How much mileage can I expect from that Magnuson M90 blower? If you have any idea, or who to ask, thank you very much. Doug in Michigan

[@automafiaracing]

I'd ask Magnuson but the oil Def needs changed every 3 to 5 k miles

[@kvngbanks]

Street sweeper sleeper 🔥🔥

[@automafiaracing]

lol

[@bryanortiz1495]

So you was talking about how the turbo could be improved. What do you recommend , because I want to do the same thing to mines but I need like advice before committing

[@automafiaracing]

Sell the 4.0 v6 and get a 3.7

[@devontaeharris8519]

I just bought a 2010 4.0 and I'm really considering a ProCharger kit, and you all are by far the best place for installation and tunes. How much for parts, labor, and tune? Serious Inquiry.

[@automafiaracing]

Give us a call 941-979-1132. The kit runs roughly $5500, tune is $750 + device, and $1500 give or take for install depending on if we are doing a fuel pump, injectors, gauges, etc..

[@automafiaracing]

or email us at [e-mail]

[@skaterbi922]

where are you located in the us?

[@jimmywhitlow2012]

Cheaper to sell your car and buy a 5.0, not hating. I have a 05 4.0. I thought about it as well.

[@automafiaracing]

Billings, Montana

[@CupaJoe]

May I ask, was there any parts of the engine to be rebuilt to uphold the power or are components like the shaft, cylinders, valves all stock ?

[@automafiaracing]

Nope

[@taiyongchoi2212]

The best tuning ever. I envy my car v6.4.0. I want to do tuning like I live in Korea.

[@automafiaracing]

We tune world wide.

[@aimless-drifter]

pretty dope build

[@automafiaracing]

Its pretty cool

[@robertabel3906]

Who's timing chain set up are they using? Tensioners and guides break under stock power, what company's would you use to support 400+? Cloyes?

[@automafiaracing]

We like cloyes

[@andrew1923]

I know 350 isn’t a lot but would it be good to daily if you was pushin 350 hp without worries of blowing up ?

[@automafiaracing]

People will talk crap on the internet but a 350 rwhp car is pretty quick and lots of fun.

[@jenamorgan9507]

We gotta 2002 Ford Explorer with a 98 4.0 sleeper she's a BEAST! Noone said we could do that motor swap not even google. Said it was Impossible to out a 98 in a 02 explorer cause the wiring harness

[@automafiaracing]

Fun

[@manworksgarage]

Not everyone needs a 400 hp block busting v6. An extra 100 would feel great I er the stock and relatively fun 210

[@automafiaracing]

210 fun. Doubtful ;) haha but enjoy it!

[@manworksgarage]

@@automafiaracing hey. Not the fastest for sure. If a 100 hp Miata is fun a 2-300 hp mustang can be right? The tuning was awesome. Best power I've seen from one.

[@mattwoodburn2233]

What kind of tuning software are you using? I’ve got a 4.0 turbo 62/66 T4 on a powerhouse turbo kit with a SSM 4.0 short block so pistons, rods, also had stage 2 heads set up from them as well and ARP all the way through. Currently sitting on a 8psi spring and I make 350hp and 400tq on the current tune. Which I’m not very happy with but no one in my area is very good at tuning the 4.0 it seems like.

[@automafiaracing]

We use SCT, HP Tuners, Cobb, UP Rev, stand alones, etc. On this car we are using SCT. We saw 10 lbs on the final pull to get the 430/513

[@crossplatformz5511]

Were did you get your upgraded heads at

[@tonybologna6585]

Doubt there would be much interest but I would like to see a 3.8 turbo kit.

[@automafiaracing]

Thats the problem. No one wants to pay $3500-$6,000 for a turbo kit for car thats worth $1500

[@tonybologna6585]

Auto Mafia Racing I would be interested. To be fair the 3.8 never got the respect or a chance to really form a following like the 4.0 or the 3.7

[@nickwennick7398]

Can you guys make a supercharger or turbo kit? I’ve only found one supercharger kit for my 4.0 v6 but it already has an exhaust, cold air intake, and hopefully upgrading the fuel cell and camming it. How much would it cost to install a supercharger? Im in mifflin county

[@automafiaracing]

If you want Supercharged we suggest procharger. With that we will be mid to low 300 rwhp. Price for parts is around 5k with install and tune being about $2500

[@sterlingtaylor8614]

At that point you just bought yourself a used 2005-2011 GT that probably has exhaust, cai, and tune already done for you. V6 are for fuel and grins nothing more. My 4.0 is for daily smiles, my charger is for aggressive fun driving. Next one is 2016 S550 w/whipple that will be for bullying 😅

[@EarthSurferUSA]

I build little 2-stroke engines for a living, and know how a blower works, but I found it interesting on my roots blower when it was tuned by a shop (the first time tuned), that thing would move/boost as soon as you got off idle. I had a different tune put in that makes me press the pedal more to get the boost, and runs pretty much like stock under that. The tune has to do with all the electronic engine management (a weak spot of mine), including opening the gate. Do you have that kind of tune-ability range with a centrifugal super charger?

[@automafiaracing]

Yes we have lots of tuning ability with centrifugal superchargers like procharger

[@rubend.rodriguezjr.530]

Where are you guys located? I have an 07 mustang v6 which has long tube headers and pypes exhaust cat delete and Mufler delete. I would like for it to reach 500 HP what do I need to install for it to reach those hp?

[@automafiaracing]

📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 [e-mail] www.automafiaracing.com

[@texasquadtip5817]

About the only other 4.0 I like on KZbin.

[@automafiaracing]

we have a new one coming :)

[@texasquadtip5817]

@@automafiaracing can't wait to see it

[@automafiaracing]

Procharger

[@texasquadtip5817]

@@automafiaracing looks like I know where I'ma send mine to!

[@automafiaracing]

Send her down

[@charlesrose1659]

Question I bought a2010 mustang with no ecm and a 4.0 I took the 4.0 out and puta 4.6 in it out of a 08 mustang i bought a 2010 wiring harness for a 4.6 hooked evry thing up beautiful had the ecm from the 08 but ofcourse it didnt start so found a co.on line that makes ecms programmed to your car got one with keys didnt work the tech guy I talked to said he just needed the vin # to the car that the motor came from I asked twice was he sure because why would u need the vin# from the 08 instead of the 2910 long story short it didnt work they said since I took the 4.0 out and put a 4.6 in the car will never start don't believe that can u help me what do I need to do thank you

[@automafiaracing]

Put the 4.6 harness and wiring and ecu in. Sig

[@chevyboyforlife4234]

I just picked up a 2005 V6 5-speed mustang dirt cheap it needs paint because it's fading but it's still pretty clean all the way around I would love to turbo this thing

[@automafiaracing]

We may have a kit coming for it

[@STGGamingOG]

​​@@automafiaracing I take it no kit came out? I can build one but I don't wanna deal with the customer manifolds and crossover for the exhaust

[@nimrodpaul6875]

​@@STGGamingOGdid you find one,?,, I have an 06 5speed that's cherry condition. 70 year old kept in garage ,68,000 miles and sold it to me for 2k. It was a x-in law so that helped with the good deal of course.

[@STGGamingOG]

@@nimrodpaul6875 nothing yet

[@AMV12S]

If you close your eyes, the sound would remember you the Grand National.

[@automafiaracing]

:)

[@pablo.8385]

I have a 2018 camaro i4 and was wondering if I can get it tuned by you guys, I’ve been looking everywhere for a tuner. Also correct me if I’m wrong but are you guys located in Florida ?

[@automafiaracing]

Yes we are in Arcadia Fl and would be happy to tune you.

[@pablo.8385]

Auto Mafia Racing as soon as I get my zzp down pipe and zzp intercooler Ill go get my car tuned by you guys. So far my mod list is : injen evo cold air intake, zzp throttle body and catback straight pipe exhaust. Where can I email you guys to let you know when my car is ready for the tune

[@beeasy2024]

Man this makes me want to get some power out of my stock 4.0. Is this on stock internals?

[@automafiaracing]

Yes

[@thedukeofconway4209]

That’s insane out of a 4.0 ,I don’t see the engine lasting long

[@automafiaracing]

We agree

[@theraven26780]

it sounds damn good!!!!

[@automafiaracing]

Great

[@wisco-ninja]

did he put any forged parts in? like aftermarket pistons and shit? I have a v6 mustang but don't know how much HP I can get through it

[@automafiaracing]

nope stock junk

[@wisco-ninja]

@@automafiaracing interesting. how much would a turbo kit run for on a 4.0

[@RD-dl4bi]

Was thinking if I should supercharge or turbo my 06 mustang v6. A lot buddies considered that I should supercharge it instead.

[@automafiaracing]

We have procharger kits for you. 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 [e-mail] facebook.com/automafiaracing

[@guerian84]

Wow u guys are in fl

[@RD-dl4bi]

@@automafiaracing Average cost?

[@Catalyst512]

Did you ever make a kit for the 4.0? I’d love to pick one up

[@automafiaracing]

Send us a message. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 [e-mail] www.automafiaracing.com

[@theejoeylee]

Wonder what the pushrod 4.0 would make with 10 psi. I have one in my 2wd 5 speed ranger

[@automafiaracing]

I believe this was 12 psi so a lil less

[@manworksgarage]

The ohv engine has same number of valves so probably pretty close

[@theejoeylee]

@@automafiaracing Torque monster of a v6. just sold mine. It was a 2wd, manual, taurus 2 speed e-fan conversion, Lightning side exit, Straight piped, no cats, A/c delete & an intake. It was as Quick as a new 5.3 silverado or WRX. ( I worked at a dealership n co workers trying to race me home lol). think Im going to get a new ecoboost one but 4x4 (snow), exhaust & tune should be almost 350hp and 380-400ft/lbs

[@pistolpete7280]

Wow, huge respect for this build. Stock motor?

[@automafiaracing]

for now!!!!

[@bobayagga2233]

MyTurboStang where did you get the valve springs from ?

[@automafiaracing]

I believe we sell several brands that work like comp

[@josephg41]

Out of pure curiosity, what is it about the 4.0 you guys dont like working with?

[@automafiaracing]

they are simply not a good motor for performance. the 3.7 holds more boost and makes way more power even stock. also the 3.7 comes with the same transmission and rear end as the 5.0, the 4.0 comes with a weaker trans and rear end. overall its just not worth messing with

[@josephg41]

@@automafiaracing Very interesting, thanks for sharing.

[@EarthSurferUSA]

@@automafiaracing Yea, I should have figured that out before I put a lot into my 4.0. But with the prices today, damn,---it may have been worth it. I don't want to sell it, but it would be interesting if I could get 20,000 for it, or maybe more? If that can happen, well I guess stupid people can benefit from a failing economy. I could have been a politician! :)

[@big_dwz]

I should bring my mercury wagon over so you can increase the Hp :)

[@automafiaracing]

Bring it on over.

[@sargeantschnutz5767]

Are there any existing kits for internals to make this type of horsepower reliable in the 4.0? If not, how much would it cost to have that done?

[@automafiaracing]

No. Skip the 4.0 and find a 3.7

[@deadlead03]

@@automafiaracing rip 😅i just bought a 4.0 😢

[@automafiaracing]

Lame hahaha

[@joshuamittie791]

I have 06 v6 and thinking about twin cheapo kit just fun. How it the t5 tremec not exploding

[@automafiaracing]

twins would be an epic waste of money

[@02honeydew]

At what power level do the blocks split on these? I wish companies would put as much time into the V6 engine development as they do the V8 so that the main components (block, heads, crank, etc.) are just as strong as the V8 engines or at the very least, not prone to cracking in half at lower power numbers.

[@automafiaracing]

Pretty much at this power level. The rods are ticking time bombs at over 500 ft lbs or 400+ hp and we are over on both.

[@02honeydew]

@@automafiaracing Man, that sucks. A shame that more V6 engines from Ford aren't better. Not every one wants to spend the money to swap a V8 in to make power either. Thanks for the reply guys. I haven't watched the channel in a few months, how is the built motor for for track car going?

[@IamFreeSpirited]

@@02honeydew you can buy stroker kits for the 3.7 for like 5-6k. With those all forged internals can easily run big numbers

[@02honeydew]

@@forced4motorsports Oh alright well that's not too bad I guess it's about what the factory pushrod 302 blocks got then for at least the more recent castings. It's definitely impressive though it's over 1hp/liter and over that in torque/liter. Hopefully it proves you wrong and lasts even longer than you think at that level lol. Definitely a cool car though 2006 isn't my favorite year for the first half of the S197 chassis but you definitely made yours look really nice. Hey, if it doesn't blow up I guess you'll have plenty of time to improve the drover mod lmao.

[@02honeydew]

@@IamFreeSpirited Yeah I saw some of those on at least one website. If I can ever end up with one of the later S197 cars with that engine I wanted to put of AMR's turbo kits on with a forged motor and have fun with it. A 3.5TT ecoboost swap also sounds interesting I know a few people have already done them and they turned out awesome.

[@tylerdurden7016]

Is this the same engine as the 4.2 Essex that ford put in the trucks?

[@automafiaracing]

This is the 4.0

[@Drivermodjay]

How bad would it be to swap the 3.7 and a six speed into my 06 v6?

[@automafiaracing]

It would be awesome

[@jonnyxtendo7815]

whats all done to it? curious whats the best stuff to do to increase power on a 4.0

[@automafiaracing]

Boost is the best power. This has a ghetto turbocharger setup. 4.0s are the same as every car they need more air more fuel and more exhaust to make power.

[@PreacherDan]

Even with that tiny snail? That’s making me rethink what turbo I can use in my car.

[@automafiaracing]

If you got a 4.0 just sell it

[@PreacherDan]

@@automafiaracing I don’t. I have a 3.7 but 400ph from a 4.0 is impressive.

[@crossplatformz5511]

What spark plugs to get or even what spark plug gap to run with a turbo for the 4.0 or is stock spark gap okau

[@crossplatformz5511]

Okay

[@automafiaracing]

We generally recommend ngk6510 but I'd have to check if those fit the 4.0 too

[@crossplatformz5511]

Is the engine stock and how many miles if not what upgrades done to engine

[@automafiaracing]

Yes it's stock. Not sure.

[@Jesusp-tw2hd]

I’m in the process of turbo charging my 2010 4.0 I have the sct tuner just need a tune for everything how much does that typically run?

[@automafiaracing]

We are no longer tuning pre 2011 cars

[@Jesusp-tw2hd]

@@automafiaracing alrighty thank you anyways love the channel

[@Jesusp-tw2hd]

@@automafiaracing alrighty thank you anyways love the channel

[@automafiaracing]

Thanks for watching!!

[@jesusangel4353]

Loved the color. Which is the color code?

[@automafiaracing]

Not sure

[@gtaclxpsu5032]

How much hp can the 4.0 handle without any serious problems?

[@automafiaracing]

Not much

[@Woody10719]

we need an update on this!

[@automafiaracing]

We are no longer working with this customer.

[@_D.I.G_]

that tiny turbo might be perfect size for this car. do you know the size it is?

[@automafiaracing]

Not sure. It's a junk slapped together mess we didn't build.

[@ttsscorpio2664]

Soo what should i do all together I have a 2013 4.0l v6

[@automafiaracing]

If you have a 2013 then you have a 3.7

[@crossplatformz5511]

What the best hp for a 4.0 mustang and how much boost to just drive daily

[@automafiaracing]

This is about it or over tbh

[@kennethhowell1272]

So what makes the 3.7 V6 capable of more horsepower than the 4.0 V6 ??

[@automafiaracing]

everything about the engine pretty much. forged crank and rods.

[@Dr.Mcstaby]

I'd love to turbo my 4.0 but im broke and not sure what turbo to get.

[@automafiaracing]

Well broke and turbo dont go together haha. Also there isnt a kit on the market for the 4.0 at this time.

[@tylerblocker2501]

Sick g35

[@automafiaracing]

Lol

[@chapmanmerchant]

WHAT is the corrected numbers on your dyno.

[@automafiaracing]

We show it all. That's probably STD.

[@sparks6099]

Is a rear turbo worth it on the 4.0 with 125,00 miles?

[@automafiaracing]

We are currently building one ;) so yes

[@jerryrivera7704]

Just subbed cool car😎😎

[@automafiaracing]

Thanks for the sub

[@Codypod]

I hit 480 on a single backed by a pro charger pushing 19psi

[@automafiaracing]

lol compound boost.

[@Galejoshua7]

Love the video. 2 questions. I have a bama tuner from AM w/ free tunes for life. Do you guys tune better than there general tunes? If so how much? 2nd question. Supercharger or turbo charger the v6? Is any worth it in your opinion . 06 mustang .

[@automafiaracing]

1. ew bama. 2. Turbo is always great but for the 06 id say procharger. We carry a kit. 📬 Contact us for the Best Customer Service and Lowest Pricing! 📞 941-979-1132 📧 [e-mail] www.AutoMafiaRacing.com

[@CharuzuXVI]

that pushrod v6 sound. Hard to hate compared to the new raspier 6s

[@automafiaracing]

Can't argue that

[@GimmeDaBacon]

I feel like there’s too many problems with the chain system since it’s an ohv block the owner would probably get better power out of it by turning it back into a ohv like how it is in the ranger but if you ask me the money spent developing the sohc system could’ve been spent making a better ohv version and only using it as that in every application but hey who knows what the hell Ford was thinking at the time

[@automafiaracing]

Who knows. Just swap it for a better engine imho

[@psychedelicfrogs4904]

do you know where they got the turbo?

[@automafiaracing]

ebay or a junkyard probably. Thats what this whole build was.

[@isaacgee2850]

I got the same v6 ima have too do this too my car

[@automafiaracing]

We suggest getting a 3.7

[@isaacgee2850]

@@automafiaracing I got the 3.7 I believe

[@isaacgee2850]

What kind of supercharge kit should I get for the v6

[@automafiaracing]

We have procharger kits are a developing a tvs

[@isaacgee2850]

@@automafiaracing and once’s I buy the kit I add it on then I buy a tune for it right ?

[@ayoud1134]

where can i find the manifold i wanna turbo mine but i can’t find a manifold anywhere

[@automafiaracing]

No one makes one

[@dondeezy.]

How much would you charge me to bring my 4.0 over there, turbo charge it, and get it up to 400hp?😳

[@automafiaracing]

$8500 is our pretty standard price for a full turbo kit installed and tuned.

[@Dr.Mcstaby]

@@automafiaracing if only i had more money :'(

[@robinrouter2059]

this the ford cologne 4.0 liter v6??

[@automafiaracing]

Yes

[@HristiIliqn]

Im from bulgaria and im looking for turbo for my V6 Mustang where can i find a turbo

[@automafiaracing]

We sell turbo kits. 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 [e-mail] facebook.com/automafiaracing

[@strickracing437]

how did she use the stock manifold to mountthe turbo

[@automafiaracing]

no idea.

[@leoguzman4601]

What’s the suggested turbocharge you suggest me for my 4.0?

[@automafiaracing]

We are debating making a kit but it would be probably $5k

[@spoonman8828]

@@automafiaracing you should make one

[@RagingBull721]

Would it be a bad idea to twin turbo a v6 of this year with 155,000 miles ?

[@automafiaracing]

Yes

[@crossplatformz5511]

Depends on turbo size I’m running 50mm turbo single turbo 10psi or boost 154,000 miles running strong and pretty quick no upgrades to engine stock injectors

[@automafiaracing]

Just depends on boost level. Twins or single doesn't rele.matter

[@jdtv...9134]

You're not getting to the injectors on a Explorer or Mountaineer with the newer style intake similar to the fox body 5.0 had

[@automafiaracing]

🎅

[@brettdamm6042]

What front grill is that?

[@automafiaracing]

Who knows

[@6cylWill]

Does it only have a turbo

[@automafiaracing]

Yes it has a turbo

[@jdtv...9134]

I would have you all tune my ride instead of evolution performance. I'm in Delaware County outside of Philly

[@automafiaracing]

sounds fun

[@tygrossman4183]

Stock internals?

[@automafiaracing]

yes

[@t28-h6j]

@@automafiaracing how many miles do you think the 4.0 can handle on stock internals?

[@automafiaracing]

How many miles? No idea depends how its treated during those miles.

[@nicholashodges6661]

@@t28-h6j I've got over 220,000 mine lol still runs like a charm

[@josephwilliams7180]

@@nicholashodges6661 I have 220 thousand on mine aswell. Thing wont die.

[@JavierV07]

I'm in Chicago, I'd like to pay to do that job on my 2006 Ford Mustang V6 4.0

[@automafiaracing]

We do not currently build 4.0s

[@5.0productions74]

I have a supercharger ho mustang v6 4.0 can u tune it to 400+?

[@automafiaracing]

we can get close

[@masterspeeds9890]

Are those stock internals

[@automafiaracing]

Yes

[@matthewtaylor5375]

What kind of exhaust for a stock 4.0 should I get

[@CupaJoe]

I have a 2010 V6 Mustang, I’m not sure if you want your 4.0 to sound very loud and raspy or a more aggressive deeper sound but, I’m going to closest of a 70s muscle car sound. I’m going with BBK ceramic coated long tube headers, pace setters high flow cat H pipe, and a dual borla s type stinger cat back, you’d have to change the rear valance or depends for dual. I might get my stang cammed just to give it that lopey sound as well.

[@automafiaracing]

4.0 we like to run long tubes and borla touring.. frM-4210-B3

[@IamFreeSpirited]

What turbo is it?

[@automafiaracing]

a combination of a few things. Im sure the owner will comment as she knows exactly what it is.

[@ivanvazquez4632]

Can you do it on my 2008 4.0 and how much money will be?

[@automafiaracing]

$10,000

[@aidanletterese3099]

how much would this cost, i want to do this to mine

[@automafiaracing]

If we had the car here we would charge $8500 parts and labor installed and tuned

[@budbrudis5213]

You won’t get the best of this system unless you swap the rear end to posi trac.. the stock rearend on a 07 mustang won’t perform with a pro charged system. I know that personally, he can dispute it but I’ve been there..

[@automafiaracing]

I do believe this has an 8.8 under it

[@watsonville8312]

Good daily if it's reliable

[@automafiaracing]

It's not

[@toomuchsauce3389]

Im saving up for a 5.0 swap

[@automafiaracing]

Good idea let us know how we can helo

[@tatankahanska120]

Hahaha that's funny "Kalanaggah" motor lmfao

[@automafiaracing]

its what I always think haha

[@chuy9063]

whats the exhaust set up?

[@automafiaracing]

turbo

[@nitrousman1139]

4.0 rangers almost sound louder if not better for some reason 🤔

[@automafiaracing]

agreed

[@kennethmills6325]

For everyday use

[@automafiaracing]

Why not

[@dimitribellakis4352]

I asked previously but what turbocharger would you recommend to use ? (Size, ar, etc)

[@automafiaracing]

V6s like a smaller turbo. Something like a 6667 with a .81 AR back housing does pretty well.

[@BlacknRedSN95]

im trying to see a newedge v6 on this dyno

[@automafiaracing]

That would just be disappointing

[@BlacknRedSN95]

@@automafiaracing hey those are some of the strongest engines Ford has ever made for the v6. There's a twin turbo'd tbird with the 3.8 on KZbin with over 800hp

[@BlacknRedSN95]

@@automafiaracing or this guy...who is insane...who has both a liquid cooled 3.9L intake manifold engine and a twin turbo'd 4.2L engine he's building! so exciting to see crazy shit like this!

[@BlacknRedSN95]

@@automafiaracing kzbin.info/www/bejne/boTGfGhuj9V4jbM

[@strickracing437]

how do i tune my turbo 4.0 ? y'all sell tunes or buy a sct handheld ??

[@automafiaracing]

Yes we can tune them via email. Yes we sell tuning devices as well.

[@strickracing437]

@@automafiaracing so do I need a sct or bama device then get a tune via email then upload it with my sct or bama device or what ?

[@automafiaracing]

Yes. We can sell you a device and the tunes

[@strickracing437]

@@automafiaracing whats the price range on the device do u buy single tunes or free tunes like bama or ??

[@automafiaracing]

Device like the sct x4 is $399.

[@kennethmills6325]

Parts and labor how much does a good kit like that run ? 🤔 or a better one that u recommend?

[@automafiaracing]

There isn't really a kit on the market for it. We will have a rear mount kit out soon

[@kennethmills6325]

@@automafiaracing I see what would be good guess range I’d be spending?

[@automafiaracing]

$3500

[@kennethmills6325]

@@automafiaracing damn that’s not bad at all

[@kennethmills6325]

Wonder where I could get that done in Omaha Nebraska lol

[@bryanspencer7916]

Would love to take my mustang to your shop

[@automafiaracing]

📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 [e-mail] facebook.com/automafiaracing

[@S197GT14]

What turbo kit are you running

[@automafiaracing]

This was a hodgepodge of random pipes and fittings.

[@S197GT14]

@@automafiaracing how much power?

[@automafiaracing]

It says it in the video ;)