50cc 49cc Scooter Performance Clutch and Variator install variator roller weights

[@jamodpower2]

would you mind making a video of how you change the clutch spring please :)

[@RollingWrench]

You will need to use a impact gun and when you install the nut you will need a special tool designed to hold the variator in place while torquing

[@MrJasonace99]

Describe the performance gain you can gain. Trying to get a feel for what to expect. Ty nice video. Id like to see the special tool and it used. Ty

[@Blackdovestudios303]

Thanks. I don't have a impact driver, but I do have a torque wrench. Do you have torque specs for the clutch and variator bolts?

[@srossman1977]

How much performance do you get out of this upgrade? and how much did it cost?

[@timjarred9449]

Thank you that helped me out a lot

[@johnfloyd2551]

That aluminum drive face with the casted in fan blades, is there one like that available for the qmb139? Id like to replace my plastic disc fan and steel drive face with an integrated style like yours, i dont feel the little plastic fan moves much air across the belt and clutch, ive looked and dont see this application for the qmb139 anywhere..

[@GibsonLesPaul2273]

Dont you need to grease up these parts before installing, I guess not cos you dont want any getting on the pulley/belt but i was gonna simply wipe grease onto these parts using a cloth so they have a thin film of grease, not enough to find its way to the belt?

[@ffnlzqf]

I have a Tao Tao 50 it has two shocks in the back.I have experienced A high schilling noise from my scooter .What is that.I also was coming home awhile ago and my scooter would start to slow down and I would wait and go along with it and even stop.Then I would give it a chance and start going again and it would go and then start loosening power again and I would have to start.I would love some great advise from you my friend

[@watsonthomasb]

Have you ever come across a variator that does not engage all of the way? I have a hard black line (Made up of belt material) about 1/4 of an inch in from the outer edge. I haven't worked on a variator before but this line makes me thing that the belt isn't making it all the way out to the edge of the variator plate. Any recommendations?

[@benniemajor638]

Thanks this helps me a lot

[@prosimo789]

can i ask sir what is the effect if u remove the stock washer on the pulley instead replacing of bigger size

[@bscottme]

is it easy to get the old spring out, and the new spring in? anything i should be on the look out for?

[@DanesAnimales]

Nice vid. Question, u say that you installed the new (white) spring for extra performance, but what does it do apart from increasing the force needed for the belt to move lower onto the clutch side. Are you allong with this spring also installing a big bore kit?

[@Cdavis9306]

i just got my scooter out the shop the carb was loose on the inside . but now my drive belt stopped working. it wont turn the wheel no more. when i try to accelerate it just makes a squelling nois and doesnt turn the back wheel my belts not broke. its old though. is it the belt or the things that spin the belt?

[@jakefarronmerlin7963]

so i got a spring with my malossi variator, is the spring for the clutch bell end?

[@Hannah-sk3fv]

love the video keep it up

[@tomstoddard8339]

please tell me where to get that cooling fan this is a 50cc right? Been looking for a none nylon one for ever

[@bogdan18me2]

Could anyone please give me an explanation:What's the difference between a standard stock scooter variator and the racing variator?because frankly I don't see any difference. I wait for a valid answer.Thx

[@rosewell1983]

When you are at the point where you want to enchance your scooter's performance, how do you know the new engine parts will actually fit?

[@LoveableSometimes]

will this fit on any GY6 engine/CVT I have a 2008 tank urban classic, it has the 139QMB engine, but there is a TK in front of the stamp, not sure if that matters or not but i would like to start getting a little more accelleration and speed out of it like ASAP

[@RollingWrench]

Yes, you can do the same upgrade on a gy6. Go to scooterdork dot com

[@tstephensii6832]

I need the plastic piece that sits directly behind the variator and over the flywheel, would you happen to know what this part is called or where i can get it? my stater engages the flywheel but wheel not engage the shaft do to this part just freely spinning

[@waynebutts4725]

I have a 50 cc Delray propel scooter It doesn't get enough gas. It keeps running out of gas. Can anyone tell me what might be wrong

[@Lauri-B]

What is the easiest way to get my Kimco agility 50cc to go little faster (60 kmh)?

[@motley679]

Pst - I have been really curious to this. If somehow, someway, is it possible to somehow put to much impact onto the variator? Causing damage, Maybe internal. Just a fear I have sometimes..

[@mickeycollins3108]

Once i up grade performance on Kymco Agility 50, how will I register it,also I will need motorcycle licences.Will be legal to do this

[@twacha007]

Hi all, could u advice me the fit spring clutch for Kymco Agility 50cc 4T ?

[@acwortha7802]

great help , thanks alot mate :) !

[@RollingWrench]

naaaaahhhhh!

[@bellevernon15012]

where can I buy some new pads, springs ect for my 1984 honda spree? I cant find them even on e bay. the clutch needs a makeover

[@MREVERYTHING727]

Hello Rolling Wrench, I just replaced my battery adjusted the valves and gas lines and air intake valves scooters runs but I am now hearing a ping in my clutch. What could be causing that or should I just get a new clutch? I'm on a fixed income and money is tight so Any ideas? Please help I am MREVERYTHING727

[@christophermihaylov1299]

Hey just wanna ask whats that gear called on the crankshaft behind the variator :P ? My brother in law has a scooter like this one but that gear on the back that I dont know the name of is broken cant find it online cz I dont know the name haha :D

[@tommyb8005]

When doing these upgrades do you have to do anything else to the engine or carb or anything.

[@RollingWrench]

You don't have to. But if you want even more power you can.

[@RollingWrench]

Just be careful of the spring compression

[@temperedgamer7822]

is it important to use a thick belt on a 3kj engine a lighter belt makes it run faster

[@ItsDevlcon]

Is this the same with all scooter types? What is the overall performance increase? And what site would you recommend for ordering these parts?

[@syedali-zb8wx]

Hi planning to rebore for Scooty is it OK or new bore please tell me soon.

[@TrungTheMaker]

so i have 7gram variator weights in my 72cc scooter what kind of springs should i have in my clutch? im so confused on what to do? please help me ill give you a like. :)

[@dollyhedrick8969]

I have a vip future champion scooter , I changed the clutch in it and now it vibrate and starts out like its already engaged very slow to pick up spee, but is ok when it runs at higher rpm what is the problem?

[@terjee648]

+dolly hedrick on Minarelli there is a 105mm clutsh and a 107mm clutsh , you may have 107mm clutch and shall be 105mm . think it comes year of manufacture

[@mitchellstephens8011]

I have the exact same model. I have the same issues. Did you find any solutions?

[@giorgibiwadze4655]

where can i buy this front variator?

[@Youtubervideos125]

Please tell me the name of the thing behind the first front clutch?

[@tommyp110]

P.S its also called vog scooter what happens all the roller bearings fall out

[@ffnlzqf]

my question is my back wheel on my tao tao 50cc is making a clacking noise when I first start to ride it .It does stop after a block or 2 the back wheel seems to lock up when I have not rode it for a couple of hours.I am not sure if it is a clutch or my brakes

[@denissdaskovs1558]

thank you so much

[@micpea43]

I have a 50cc chinese moped that want go when im on it with alittle push it trys to go but sputters and just barley goes i just cleaned the carb an blowed out the back clutch but still ????? Also when i was adjusting the idle an my arm touched the frame i felt sum shock runnig thru my fingers ???? Any Idea ?????

[@nowayout369]

your a god

[@RollingWrench]

Its really hard to say through the computer. for starters check your coil be sure its not arcing onto the frame.

[@gerryzpage]

Hey wanted to know what kind of rollers you where using?

[@bigrob497]

so if i wanted to improve the take off of my scooter what spring should i get ???

[@theloneriderzadventures]

If anyone can help me i have gy6 50 I installed a stage 2 performance clutch and now i can only go 18-20 mph at 7500 rpms. What type of varaitor weights do i need in order to be able to do 35+ again. I need help asap its my daily. Thank you

[@mitchellstephens8011]

Ryan I'm having the same issues. Did you find any answers??

[@babariyaamit555]

thanks

[@tommyp110]

Can anyone tell me where to buy a cheaper Starter Clutch i have the 250cc Yamaha clone engine. i have put 3 clutches in they last about 10 minutes and fly apart i buy from the same company about $50 a pop any Advice? the teeth on there clutch look a little different but not much. Would this cause this?

[@ChocoCheetah]

nice thx

[@TC_Connection]

Change the variator is not soo hard... The hard part is unscrew the variator nut. (T_T)

[@antadananala7004]

name this scooter??

[@ffnlzqf]

Rock City

[@sharischiebel469]

stop derestricting your bikes. you'll just fuck up the belt