50CC GY6 SCOOTER PERFORMANCE CLUTCH WORTH IT?

[@throttle_therapy]

Thanks for watching! Who is excited for the next video?

[@bluecobalt665]

Me bro! Love this series

[@throttle_therapy]

🤘🤘

[@fthrgasp]

this is a rollercoaster journey. anxiety, terror, hilarity, i can't wait to see what's gonna come next lol

[@Onetime76012]

👍

[@dajiban9325]

@@throttle_therapy hey could you do a video explaining what works and what doesn't and how to get these mods

[@vamountainman2512]

Don't even own a 50cc but I enjoy watching people tare down scoots as often as possible so that the process stays fresh on my mind for when I inevitably need to start doing more than just maintenance on my 150

[@throttle_therapy]

Thanks for picking us to watchA

[@401smokers]

I just installed that exact big bore kit on my moped and it runs way better now

[@throttle_therapy]

That is a relief to hear🤣

[@fixitdaniel]

Nice good stuff dude I actually upgraded my scooter from a 50cc to a 90 from Rolling Ridge so it's running really good now I'm about to do a gear upgrade on the bike love your stuff though good stuff

[@throttle_therapy]

Awesome! Sounds like a fun machine Thanks dude🤘

[@cav3man360]

How fast u average on ur RW BBK. I havent been able to get my carb running well enough to get a descent gps reading

[@hamzahmushtaq877]

The reason that buzzing thing happened and that the nut came off is because when it was torqued on the belt was in between keeping the outer side of the variator or the big starter gear thing from seating properly, now because the big outer variator gear thing is toques up against the belt and is not seated and centered properly, when you start driving, pressure is put on it which eventually makes it want to move out of position because the belt is rubbing against it to pull our weight, and then it either loosens too much and the starts making fun noises or even better flies off and wreaks havoc on your cvt, to solve this install the belt after the actual variator and also press the big rear clutch spring down so that belt sits inside which gives slack when you install the outer variator thing, hope this helped

[@JoshSparky1990]

That's good to know, I think I might've done the same thing, well at first I took it to a moped shop, and changed clutchs at 4k miles. Then started making rattling noise like if my 6 gram rollers are shaking. I was thinking it was the spring on the clutch and that I got a faulty clutch or that like he mentions on the video that maybe there's a break in period. Lol I bought this performance set, I got a 80-100cc BBK from the previous owner I got it from but havent installed, I also ordered a new carb and spark plug since from 15-30 is having issues getting power and now won't go past 30 mph and struggles up hills. Inspected fuel lines and all and it seems to have compression, upon checking old carb, doesn't even have a valve screw lol it's just solid brass. Long story short I ordered a performance 50cc performance carb with new coil and fuel filter and racing CDI box. Tuesday to Wednesday I get the carburetor. I haven't changed the spark plug for over 8 months. Same for the carburetor I ran it all last winter. Honestly I think it's even the one that came with it but my moped is 2023. I'm assuming Chinese carbs go out easy? My mechanic said bigger carbs don't help speed but use more fuel. Also if a pistol or seals were bad, it would blow constant white smoke right? Thanks in advance if by luck any replies haha. I need knowledgeable people that work on mopeds so I can learn some pointers 😂 EDIT: miss worded what's installed on my moped, the 80-100cc big bore, but the variator and clutch are the ones I haven't installed yet. I'm hoping as soon as I swap out my carb and spark plug and CDI and spark plug coil, performance clutch and variator with the rollers that come with it. One more question, does a 18mm carb manifold fit a 20mm one? Looks like there's play for even a 24mm haha.

[@hamzahmushtaq877]

@@JoshSparky1990 for carb manifolds make sure the ID is the same as the carb's OD then you should have the right size

[@novaoddities3878]

the torque driver you replaced most likely has a straight grooves or different angle on the grooves. The different grooves in the TD greatly change the way your bike "shifts".

[@ericdoran4313]

80cc Big bore kit 5.5 gram rollers and stock clutch 20 mm carb stock jets I weigh 220lbs I get 44mph on flats

[@Niklasugolnikov]

Too slow for that kit

[@Niklasugolnikov]

The carb is toi small buy a 24mm

[@MichelOudendag]

I"ll do 55 mph, with a 80cc, 24mm carb with a 102 mainjet, 6,5 gram rollers, and a yellow(1500rpm) set of springs on the clutch and pressure spring. My weight is even over 220 lbs

[@MrTrilob]

@@MichelOudendag​ you are riding in -30celcius or you have a major air leak - cracked intake or leaking vacuumlines. make everything airtight, put in 88-92 main jet, 5,5 rollers an enjoy the extra horsepower :D put in rollers that keep you at 7200-8000 rpm range

[@wakenow1]

Get some 7 gram rollers as you will be doing 48. It's not much but it's something.

[@fthrgasp]

OK so... 1) I am sad because I've now watched every video on your channel. 2) BBK hell yeah! I definitely want to see the full install vid on that. I've been thinking about doing the same to mine so I'm curious how it'll go for you guys.

[@throttle_therapy]

We are excited🤘 im curious to see the new top speed because of all the different results people had in the Amazon reviews

[@moneyman957]

I’m new to the channel I’ve been watching for weeks now I’m getting a spark 150cc and I’ve been watching your videos on how to make it faster and to keep it in good condition and watching closely on fixing it as well.. cool videos

[@phoenixarizona8441]

If you plan on keeping the bike a while and riding a lot new clutch is a must big bore aftermarket exhaust and carb are a must I've had a couple scooters and mini chopper my favorite would be my street legal Baja warriors

[@philipproctor835]

On the big bore kit run a 24mm carb with a naraku intake spacer if u can it would be cool to see u install a adjustable ac current cdi box with a fabricated exhaust

[@joejensen5962]

Hey What jet did you guys settle on? I live near ish you, and have alot of the same mods lol , Glixial 80cc BBK, A9 cam, 20mm carb, uni filter, Amazon pipe, Blue CDI, orange coil, NGK carb , High ramp variator 6 gram rollers, Gates powerlink belt

[@KyillFyatPeePole]

here once again in 2023 to say dude ur videos are helping me so so so much ive been building along(laterobvi) but its going so smooth, im going for wheelies

[@johnengland8619]

Thanks for the content. It helps me because it breaks it down and give confidence

[@throttle_therapy]

Glad you are enjoying it🤘 thank you

[@VirberelloScooterTips]

Great video! Keep up the great work and thanks for sharing your knowledge.

[@dominicsickler6040]

Man, didnt realize that my 50cc was much faster than most people. I was able to go 60 flat and 64 downhill. 50 at uphill. Man im happy with mine now lol

[@throttle_therapy]

That seems to be the case with these scooters. They are all over the place with performance lol.

[@julianmartinez6604]

man how tf, im desperate for a little more top end

[@androidken]

Many Glixal and Narrako parts are the same parts. That clutch is exactly the same but 1/3 price.

[@williamhaskellhaskell3162]

6000 miles on a cheap Chinese scooter! It lasted well. Some have not. How can you get more free air to flow into the c.v.t.? An air scoop on the front? Keep out the dirt. Let in cold air

[@ashgrantham8493]

Not sure if you guys have had any experience with a 70cc big bore kit at all, if so do you think its worth it?

[@throttle_therapy]

We are about to!

[@49684]

It’s worth it to me.😊

[@Italian_MotoVlogs]

my 125cc used to max out at 55mph after I put red clutch springs I hit 70mph made a decent improvement

[@Ryan-lz1po]

How did you compress the clutch to put the belt on? With the red springs

[@Italian_MotoVlogs]

​@Ryan-lz1po well I got a hammer and hit it into place alot of messing about but enough patience and u can do it

[@Ryan-lz1po]

@@Italian_MotoVlogs lol yeah that works too 👍 I also figured out you can open up the clutch fins by taking two socket extensions on top and bottom and squeeze them together and it leverages them open. Then put belt in

[@Donbscooters757]

So is it worth it to get a high performance clutch or nah I'm thinking of getting one but not sure I'm hearing different things some say yes get it some say no don't get it so I don't know what to do lol

[@Broken_AK47]

thanks for all your amazing content. im starting to like Glixal alot too. i have the 20mm carb, the racing clutch assembly, and the 729 belt. ill also very soon order 47mm bbk. do you have any input on thier crankshaft ? sure it wont by ssp-g or naraku, but i cant afford 250-300 CAD with shipping for that right now. i have a weird knocking nosie and i cannot find the cause. could help me out trying to find the issue ? it could save me a crank if its not the issue.

[@throttle_therapy]

Thank you! We haven't had to do anything with our crankshaft so far. You might find some good info on KZbin from Scooter Swap Shop or Rolling Wrench. They offer way more in depth information on that kind of thing. Hope that helps. We just don't have the experience to give you a better answer

[@Broken_AK47]

​@@throttle_therapy thanks.

[@TEAMVISKAT81]

Like you styl man :P and you know it's quality when the package says it's a gasket, just in case

[@leohilary4685]

Just do some modification in cvt Pulley bro it will increase some top end

[@JonahNAloha]

Bro how you do this? Is it a free mod that I can do?

[@xoqoxz5490]

Is if i buy a performance clutch it doesnt come with the spring already installed? I gotta take the spring out of the old clutch and use that?

[@blessedbackpacker222]

after having big bore, it will not be 50cc, so can you ride it without tag and title?

[@fuelsquezzer2000]

What is the link for the 20 mm carb and clutch set up?

[@Demondisturba]

You tested it with the stock variator, or a high performance variator?

[@throttle_therapy]

With the performance one

[@370zTEK]

Does the 2022 Bintelli Sprint 50cc have the same motor?

[@androidken]

It's not getting tight because you didn't allow slack in tbt belt. Just FYI

[@throttle_therapy]

Good to know👍 thanks for the tip

[@CraigWalters83]

Do most scooters have the same clutches? My son has a 2013 benelli quattronove 50x and it taps out at 55km/hr. It has 554km on it and a 1/2" wide belt. Thinking of replacing with a better clutch to get 60km/hr or more out of the 50cc engine. Suggestions and help before i sell it for being to slow

[@ZBostOneR]

They all chinese scooters so might be a chance is the same parts

[@captaincrunch93]

Mine did that the washer behind the nut i had backwards

[@StefGaming]

Thus clutch bell makes the moped pick up better, it isnt going to give you a higher top speed or better acceleration.

[@spooky-vlogs]

does the GY6 SCOOTER PERFORMANCE CLUTCH make the scooter faster ?

[@philipproctor835]

Try to get a variator tuneing kit

[@alijaber9431]

Does sport clutch increase bike speed top speed?

[@ProfessorToadstool]

did you watch the video?

[@chadfenoff1953]

You guys at some point in the future put speakers on it

[@peterhogstrom1636]

What is your max rpm when you are at top speed?

[@throttle_therapy]

About 7100 at max

[@dkewlguy]

Hmm my qmb139 is 15mm on both oleys

[@vizon-aryproductions6191]

how much is the gy6 mod cost ?

[@MrSillypoptart]

What size main jet in carb?

[@bram_ops7238]

hey guys, awesome video!! I recently installed a 72cc big bore kit on a kymco agility rs, at the moment everthing else is still stock except that the varioring has been taken out. my top speed is currently around 60 kmh (37 mph). I'm wondering what the things are that I can do to get an even higher top speed. mainly the jet size, the weight for the variator, which springs I should use for the clutch and what to do for the airfilter. I really hope someone can help me with this.

[@throttle_therapy]

1500 rpm clutch springs would be a good idea

[@StefGaming]

Wat is de diameter van je zuiger?

[@bram_ops7238]

@@StefGaming 47mm boring

[@rickortiz654]

My unrestricted Agility with 6gram sliders does 40.

[@mansikkamies9146]

Change the stock airfilter to a tuning one

[@thepedlad7946]

Lucky you didnt wipe out your crank with that loose vari bolt

[@chrislavalley4062]

What kind of tach do you have

[@throttle_therapy]

It's a Runleader. Got it on amazon👍

[@chrislavalley4062]

I have that,the one with the temp sensor,I run 4,000 rpm at 40mph,what do you run for rpm

[@teihoariisnow1548]

Bonjour taille de la courroie svp

[@willarddevoe5893]

Stronger springs are just a curse.

[@ezf2867]

I love video whith 50cc

[@steveblottenberger1097]

I would try a high performance cylinder head and a cam first that's what I'm going to do with my 50cc bullet monoshock scooter and I guarantee I'll be going over 40 mi an hour before I put the Big bore kit on it

[@jacob_ian_decoursey_the_author]

Any recommendations? I’m looking at upgrades myself for a 50cc Wolf Jet.

[@thepedlad7946]

You need a 2 stroke 70cc

[@throttle_therapy]

Yeah we do! Looking at elites and prebugs. Haven't come across the right deal yet. Looking for ones that are as close to stock as possible.

[@philipproctor835]

Or run 8gram ncy rollers

[@fixitdaniel]

Yeah super great show check out mine I'm a KZbinr as well and I'm doing the kind of like what you're doing on your bike but I've already gone like like high as far as you can go on a on a 50cc scooter

[@yoboadagoat]

This upgrade will on get you there faster lol trust me

[@alanthornton6520]

Why not simply buy a 125cc