After my deliberate damage to my sample pieces, it’s now time to test fixing them. I also announce the winners of the raffle #epoxyfix #resinfix #fix
Пікірлер: 42
@MissManifest369.Ай бұрын
Well done Dave. Enjoy! 😊 Also, a lovely gesture James to offer up yourself like that.
@sarkybugger5009Ай бұрын
Congratulations to all the winners.
@hypnoticblaze4323Ай бұрын
Cutting boards= no marks. Don't be a bull in the kitchen = no damages. Put ceramic coating on top of the clear resin = harder wearing surface.
@EQINOX187Ай бұрын
When it comes to fixing resin counter tops like this you should not fill on the scratches or chips as all this would usually do is create an area where the resin does not bond properly and cause a color variation that nay look very noticeable an example is the sharpy pen which is not black and more of an oily purple, resin acts a lot like paint when fixing a scratch with a clear coat in that even though that scratched/ chipped resin looks white and and you think it would remain white in reality when you put the new layer of clear resin on it those white areas will turn back to the colour they used to be and the original colour / pattern is restored
@suecox2308Ай бұрын
The raffle was a super idea, James. Very good fun.
@annclark5082Ай бұрын
DOH! I couldn't win an argument with myself! Well done everyone 👍
@robbieroberts2486Ай бұрын
I think sometimes we want something to work enough that we ignore the fact it’s not actually suitable… that thing is too vulnerable and reapplying a new surface every few months just seems so impractical 🤷🏼♂️
@lesleym6952Ай бұрын
I won a mug! Oops I mean a storage pot with a handle 😃 Definitely not putting mine on eBay 😂 What a lovely offer James. I hope the raffle has helped fund some of the jobs on cerium 🤞🏻🥰
@DEmma1972Ай бұрын
how awesome to extend the offer in this way. James, the resin hardens over many many days, maybe sample section each day to see if it was harder than the day before. It may take 10-14 days to achieve full hardness
@jamesforehan2809Ай бұрын
Super glue, it comes in different viscosities. Use the runny stuff, then sand with 6000 grit and buff it out for scratch repair. The lower the super glue dries the less likely it is to have bubbles in it.
@richardingram2374Ай бұрын
Congrats to the winners! Wish it was me coming so I could have a beer with you guys and help out a bit as I’m on annual leave that week. Wonder if our Alan won? Could take all the trim he’s been saving up for ya 😂
@user-km1uq9dt3vАй бұрын
You know James, looking at the castle pictures on your door of Sloe Patrol I thought some epoxy resin pictures on your new boat.
@sirroy3693Ай бұрын
Resin counter tops are as practical as chocolate fire guards
@nicky3989Ай бұрын
Congrats to the winners, loved watching the resin finding its level.
@user-tc1hj7oi3fАй бұрын
Hope you can take on board some constructive criticism. Never never never wet sand using your fingertips, The only place you are applying pressure to the abrasive is under your fingertips. This will leave areas of unprepared substrate, heard it refered to as finger furrowing in the finishing trade. Always prepare surfaces where a superior finish is required with a rubbing block.
@TheNarrowboatThatJamesBuiltАй бұрын
@@user-tc1hj7oi3f thank you - I need a new sanding block and a sanding pad to help.
@trevormegson7583Ай бұрын
I think your creations with the resin may merit a sideline for you. You ought to raffle your experimental pieces too. Do you plan anymore 11 fluid Oz portable storage containers.? You have marketable stuff there James. I must admit, when I saw your initial attempts at kerfing and bending ply, I thought it would be a worthy experiment that went nowhere. I'm very glad you proved me wrong as it showed a massive perseverance.
@Dazzerdt1885Ай бұрын
Two weeks on epoxy resin time to get a wiggle on jame
@adamnorris8006Ай бұрын
This is why it's important to rake it every time
@Acapulc941Ай бұрын
I enjoyed participating in the raffle. James, what would it cost to purchase a countertop which would not be damaged by knife cuts, etc???? Leigh
@pocketchange1951Ай бұрын
👍👌❤️🇨🇦, very interesting content, thanks for sharing James
@mandycoleman1394Ай бұрын
Well done to the winners !! I have to be honest I’m not sure about the resin at all , that’s just my view . Let’s see how it goes !
@grahamh4960Ай бұрын
A vibrating table would do a good job with less effort.
@stuartsmith7618Ай бұрын
Ive seen quite a few videos on this resin.. most of the fixes are done with a plumbing gas torch
@markh6202Ай бұрын
Epoxy resin needs time to fully cure & harden ... Time depends on thickness
@danielstroubledthoughts5386Ай бұрын
As a chopping board you could have it under glass.
@J1mbo888Ай бұрын
I still demand a "Re-count" ! 😂😂😂😂😂😂
@boblawrence5011Ай бұрын
Try car paint to touch up and maybe spray with 2 pack clear
@brianbrian760Ай бұрын
What about cutting it into strips Getting some copper strips And doing a zebra like pattern
@janeingram7331Ай бұрын
I;m not sure the scratchers left unattended is a good idea. Bacteria remains in them, I have a wood cutting block and sand paper it every couple of weeks to remove all cracks. Why don't you just buy a cutting block . IKEA has bamboo cutting boards for only about £26. As a person who cooks 3 meals a day, I would never think to cut on a shiny surface.
@TheNarrowboatThatJamesBuiltАй бұрын
@@janeingram7331 it was a test to see what would happen. Of course I will only use a cutting block or chopping board
@knight2255Ай бұрын
Try Stone Coat's Ultimate Top Coat for scratch resistance
@philroberts7238Ай бұрын
Would it be possible to seal it all in with a very hard polyurethane Estapol covering?
@andrewbounds8672Ай бұрын
James sorry to bug you but do you know what the name of the Toby carvery that is right by a canal called
@TheNarrowboatThatJamesBuiltАй бұрын
@@andrewbounds8672 where abouts - I can’t think of one round here
@andrewbounds8672Ай бұрын
I can’t remember I have been alvechuch marina to Stratford apon aven and gayton Maria to Chester I think and andinton
@TheNarrowboatThatJamesBuiltАй бұрын
@@andrewbounds8672 I’m afraid I really don’t know the answer to that - sorry
@andrewbounds8672Ай бұрын
No worries thanks anyway
@rotinkerbellАй бұрын
Didn't he play for the Monkees?
@Sue_AnthonyАй бұрын
visual and sounds off sync.
@anfieldroadlayoutintheloft5204Ай бұрын
good vid keep up the good vids thanks lee
@JohnMoore-dq1jiАй бұрын
Please get on and fit your work tops James; how much time and money have you wasted 🤔