5g Pipe Test API 1104

read the full article here www.weldingtips...
Subscribe to my channel for more weekly videos.
www.youtube.co...
Visit my store at weldmongerstor... for TIG Fingers, DVDs, and other quality welding tools.
in this video you will see a 5g pipe test welded to API 1104 code.
Andrew Cardin followed the weld procedure used by his employer NEUCO.
12" pipe 30 degree bevels with 3/32" gap and 3/32" land.
5/32" 6010 root with 3/16" 7010 fill and cap.
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: / weldmonger
Facebook: / weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingti...

[@vildjuret6591]

This guy is so good at welding it's insane, no wonder he finished at a 3rd place in a world welding competition, almost falling asleep to the hot-passes just because it's so smooth :)

[@richardpowell9906]

Stygia wow wow wow let's see him on that 35year test wow wow I. do sleep an stay. jacked up only test I worry about is piss test

[@Wanglicker42235]

Richard Powell Thats the hardest test (;

[@ashleyvazquez9402]

@@richardpowell9906 😂

[@DzorJude]

Great

[@dorseyplantsllc3907]

Those cap pass solidification shots were wild. Thank you guys for another informative video.

[@jakesbackhoedozerservice7010]

Jody I’ve been watching your videos for 9 years and I still learn and enjoy them. I don’t weld for a living but I weld all the time especially on my heavy equipment. Thanks for all that you do and all the wisdom you so freely give. P. S. From one blue collar to another thank you!

[@a.s.c.2909]

You guys are on a whole other level of skill than the rest of us. Awesome videos.

[@CRebeliron]

Jody and Andrew team up videos are a better combination than peanut butter and jelly. Great video buds!

[@DirceuCorsetti]

I've learnt so much from these videos. I own a stick welder and make poor welds while losing a lot of time. All the positioning and correct technique shown here has saved me tons of time and money on DIY projects at home. I used to think my welds would get only if I could get my hands on a mig or Tig welder, but there is no substitute for getting good on a stick welder.

[@davidspin5353]

Stellar video! I'm practicing this on 10", but I was using 1/8" for my first bead.

[@SteadArcFab_Ministries]

Great job as always Andrew and Jody. Love the detail in both the welds and the video!!! Be blessed guys!!!!

[@jimbelkin7301]

So much skill. I sure wish I was that good with my everlast stick welder at making welds.

[@svsalacia6495]

Thanks for all the great tips. It has helped me greatly.

[@scarface-39]

I always look forward to your videos!! Great job!

[@craigbosko2229]

YOUR VIDEOS ARE A1 NO.1!

[@jolli84]

In Finland. 7018 and remote. Esab OK 48.05 rod. Root uphill 2,5mm rod. Cap uphill 3,2mm rod. X-ray quality

[@weldingtipsandtricks]

we do basically the same here in the states for certain pipe codesd like B31.1. But for API 1104 oil and gas industry its usually downhill but also X ray tested

[@jojomama4787]

A number of years ago I helped a buddy of mine who had a job welding the new water pipe being built in the Florida Keys,it was all down hand 7010 and pretty much the same as what you're showing here!And by the way,I was using a Huntsman 411P and still use that old hood.It's always been my favorite but you just can't get the thing wet if you want it to last

[@weldingtipsandtricks]

I have a huntsman 411p too and I love it. I put an arc one single auto dark in it

[@bronsonstephens5799]

Hey man. Just wanted to say I love your videos and podcasts.

[@AY-cj9kp]

This is a great video like all of your videos. Most of the tricks and tips that you show are well set/prepared...can u make some videos on welding projects which are far from ideal? I mean really far.. such as - welding galvanized pipes with and without zinc removal, joining two pipes with a huge gap using another electrode as a filler, etc. Something that most of us face in our garages

[@SlavikFire]

Good afternoon, please tell me. What type and brand of electrodes do you use when welding pipes from top to bottom? Thanks.

[@powerstroke0459]

Jodi, I always do that. I'm so happy that you guys made this video.When I was just learning I've smoked the flux off the rod real quick. Not even gonna touch on Stainless rod to that effect😅.But if you'd ask my old boss " Awwhh, its easy. Anybody can weld..🤔🤔... I'm not sure if I can even explain that through a written comment.... But either way keep the videos rolling. I wish you guys, and I mean everybody would do something on 5086 Aluminum base material with 5356 filler, GMAW-P or TIG root and GMAW-P all the way out. I wonder why nobody wants to touch base on that one? Humidity and Dew Point are the enemies on Aluminum

[@jimwright1148]

I am a welder too,best root i have seen inside a pipe out of all the othere punters doing the same videos!

[@gasfiltered]

Jodi: "Gravity is a thing" Alabama Sunday school teachers: GrAvItY iS jUsT a ThEoRy!

[@lanceschmidt555]

Thanks for the awesome arc shots u got the best in the business

[@johncrea9395]

Jody I am assuming that the superflex to stinger is a DIY project. Would love when you show tools like this that you would include some URLs or at least some search terms so we can find the cabes/etc. Thanks a million for all the great content John

[@weldingtipsandtricks]

I will work on getting that info from Andrew

[@ledinhanh]

very beautiful solder

[@jdbrewer6638]

Great video,awesome welder! Messy shop!

[@newdles0028]

Jody you need to do a video on the whole rig welding scene. A lot of people don't know about that field of welding.

[@MariaLopez-wz4ul]

Hola saludos...pueden poner mas datos sobre la preparacion del copon de prueba,separacion,talon,etc

[@ChrisWojnarski]

Great video Jody and Andrew thanks for the hard work you guys are the man 👊🏻👊🏻👊🏻

[@kennetht66]

That young man can really weld👍

[@peep39]

I've done my share of flux core welding - but I'm a little bit squeamish when it comes to my eyes. I've been told to not look directly at the arc, so I tend to run a dark shade and look slightly to the side. One thing I've never gotten good instruction on is just how to make sure your shade is dark enough, and what you should be looking at in order to judge the puddle (or bead height, as you mention here). I often find I can't see much outside of the puddle due to the darkness, so I don't know how you guys manage this

[@craigbosko2229]

JUST A WORD OF ADVICE,WHEN YOU'RE WELDING,YOU HAVE TO LOOK AT THE PUDDLE,ARC,IN FRONT OF THE ARC,ALL THE WAY AROUND THE PUDDLE,NOT JUST THE PUDDLE.YOUR MIND IS IN A GREAT CONSTANT STATE OF FLUX NO MATTER WHAT KIND OF WELDING YOUR DOING.

[@bretmcgee3573]

For anyone watch trying to learn. If you wanna actually put some good metal in there for filler, just go side to side and let the bevels fill. You’ll eliminate a fill pass. Also there’s no need to whip that far on bottom. But everyone has different presence

[@toolbox-gua]

Great video, great education.

[@davidrios9094]

Awesome video only one question what were the positioning angle of the rods from 12 down to 9 and to 6? Straight? 45?

[@texaswesternwelding915]

Can you do a UA1 Weld test Video? I love your content man straight jam up!

[@apachesmokemachining6487]

Great piece of welding and great tips,

[@nivirshohel9185]

Great job

[@rmschrader36]

Excellent work as usual! May be a silly question but why does the API not require the use of a low hydrogen rod like you would see when you do a 6010 root and 7018 fill and cap? Is it strictly for production, or is there some other underlying reason? Thanks in advance!

[@craigbosko2229]

THERE IS A L-H ROD MADE FOR DOWNHILL,PIPELINE WELDING:E-8045,E-9045 AND E-10045.STRINGER PASSES ONLY,NO WEAVING(LIKE WHAT YOU USUALLY SEE ON THE CAP PASS.THE ELECTRODE IS MADE BY LINCOLN ELECTRIC.

[@jarencook9291]

Alot of great tips in this one

[@dtaylor777]

Can you please do 309L, 308L, 316L uphill and overhead?? Preferably 1/8th in struggling so bad with that

[@oldironsfury]

Not that I know much on stick welding but can you say TALENT! 👍😁👍

[@MYMAKO181]

Hi Jody, I'm new to welding so this may be a dumb question, why are you not trapping slag when you pull away, let the puddle solidify, then go back over it like he was doing?

[@lucascarby8584]

MYMAKO181 you will if your not careful.

[@jwboilermaker]

This type of electrode rarely traps slag. It’s a very thin slag to begin with. With the amperage he’s running, I wouldn’t be the least bit worried about it. He’s not welding P-91 material

[@bc65925]

I just thought of this, I bet the lens doesn't fog up when it's cold out like on a welding hood either.

[@darrellwhite6173]

No it doesn't

[@samyfajard2906]

saludos desde colombia hey jody muchas gracias por tus videos sigue haciendo videos soldaduras 2g 3g 4g 6g 5g migmag,tig,fluxcore,stick

[@FollowerofYahuwah]

Please do a 5g 7018 uphill and maybe a horizontal pipe ti flat plate 7018 uphill as if doing flange welding. Also I'm just curious about the android app for the welding community you and your son were working on. Thank you sir.

[@weldingtipsandtricks]

The App proved to be very expensive to pursue for android so its on the back burner for a while. I still intend to make it happen tho

[@stevepeat1719]

H i guys. Most interesting (again !) but 2 things. You don;t mention restarts- do you assume we've learnt from previous vids? Also doesn't Andrew have a problem with burning holes in his legs with all the sparks?

[@sylvestresanchez4848]

Thank you.

[@markproulx1472]

God damn, this man is talented.

[@riglenduwaer3587]

Thanks for showing , is a very good video my friend

[@humberoestrada388]

Always an exelent job

[@paulmorrey733]

Great video Thanks to you both

[@connermekis7780]

I like my original pancake with arc one shade 9 more than my esab sentinal

[@daver2214]

Nice hand!

[@rew4640]

Hey this is a little off subject, but I'm really interested in Texas tig welding. There are not many videos out there on how to do it. I was wondering if you've ever used this technique, what are some of the pros and cons, and when you might or might not use it!?

[@meow_bastard]

Its called Mexican Tig Welding

[@rew4640]

@@meow_bastard Yeah I've heard it cold Texas, tiahuana, and Mexican, tig but either way there's only about 4 or 5 videos I can find and none of them are very informative.

[@ahmadziad3857]

كم درجه الحراره التي نحتاجها للحام dawn

[@hillbillyrocker3257]

Guys/Gals please dont think I'm talking s&>t..... Would that root pass? I practiced for months (6G) and my root would look like that but I'd think it wasnt good enough and never tested. Was I just getting in my head like I sucked because I was told the root needs to be acceptable appearance wise as well? I'm finally growing some balls and seeking a job pipelining (as a helper to learn more and eventually breakingout) and need all the help I can get.

[@beachboardfan9544]

How does that whip and pause with 7018 downhill not trap slag? I never have luck with that...

[@beachboardfan9544]

Ahhh thought Jody said 6010 and 7018. Thanks for the clarity!

[@kf8575]

Out of curiosity... How come these tests are done in 5G rather than 6G? With the 5G position there's no part thats horizontal related, therefore doesnt cover all positions does it?

[@matthewcroak5305]

On 1104 code it's usually a bell hole and a 12 branch test

[@riglenduwaer3587]

Very good tech

[@5barkerstreet]

you will regret not wearing knee pads one day

[@user-gn7nw1iy6y]

What to do welding error only the beginning is true either the rest of the weak pipe and the first welding crash must install your hand without any movement is strictly prohibited welding Down with movement allows you only end cup and machining was very high work was completely destroyed

[@baxteralves5322]

On average how long should a joint like this take whole thing said and done in a normal field situation? One guy

[@lucascarby8584]

Baxter Alves 30 -45 minutes depending on how fast you are.

[@nicolasbustos9686]

what pipe wall thickness?

[@madcapmagician6018]

cool video Jody =)

[@aquaagu2]

Does 7010 run pretty much the same as 8010?

[@elaprendizspockygarcia7962]

Please name weld mask...thank's greetings from venezuelan pana....

[@thefungusshow2535]

That is a "Pancake welding hood".

[@elaprendizspockygarcia7962]

@@thefungusshow2535 thank's master...

[@DonHavjuan]

For the modern developed world, 3/16 is 4.8mm

[@nayut9380]

Till now i just told that 5G welding from bottom to top side but in this video why he do from top to the bottom side of pipe ? Which technic is correct ?

[@jdanielcornu9921]

6010 7010 8010 all cellulose rods can be used downhill, 7018 uphill only

[@jdanielcornu9921]

Many techniques/many ways to weld two metals together, all depends what the engineers wanted it to stand up.

[@nayut9380]

@@jdanielcornu9921 ahh i see ive been forbiden to do downhill welding and just only uphill welding but now i know thanks dude.

[@hernancortes6709]

Talk about your heat

[@JorgePerez-fy6hn]

and did not have to use a helper to regulate the ampers😁

[@eddiegirvan2394]

thats true. i ve been thinking of trying a tig finger remote taped to my stinger

[@stevedawelda9036]

May be a sound weld. But it looks rough as old boots.

[@colinstu]

re-upload?

[@ericmagneto8678]

Hey is it selülozik elecrode ?

[@gasfiltered]

Yes. In the AWS nomenclature any xx10 designation is a cellulose flux electrode.

[@princessloquinario1697]

Im welder I need a work you can help me ?

[@AliAlan-dw9dz]

Just need make pool back already bevel and you go weaveng

[@tonykozak2407]

The camera make him nervous. Its show's

[@paulcopeland9035]

He has had a lot of camera time on this channel. Why do you think he's nervous and where do you think it shows? The weld is perfect.

[@AmitPal-ly9eu]

Hindi me do no English

[@MYousafKohistaniOfficial]

❤

[@hernancortes6709]

Could not see a good cap

[@ВикторАнисков-к7й]

good day, I can not understand why you weld the main pipelines from the top to the bottom??? In Russia, so not hidden, only from the bottom to the top. You have very large scales, welding stress concentration! although the production you have on top. I apologize for my English

[@icekilla126]

Виктор Анисков engineers run the numbers and decide on what weld procedures to use. Going above and beyond of what is required is a waste of time and money. It doesn’t make much sense to deliver pizza in a tank when a car is good enough.

[@davidmartin2231]

Fit up wasn’t all that great, and the bevel wasn’t widened for the hot pass.

[@Kiefer0311]

Why did he do it in five passes we do this on the right away in 4 passes on .375

[@MultiShannonb]

Gravity is a thing

[@kevn7958]

I don’t know but I don’t like downhill welding on pipe

[@moneerbader6589]

👍🏻

[@hamouking2648]

goode

[@Simakuku]

класс

[@ibrahimkhaleel7943]

👍🤝

[@nathanhighvoltage5259]

Pipeline is 8010....

[@vortec9311]

Except when it's not

[@Jk-eo3tp]

😍👍👍👍

[@m3a6r9]

Uowwwwww nice jop.👍💥

[@user-ju3cg3lh9n]

🛠🛠🛠👍👍👍👍

[@ryanmcdaniel4727]

Mr. Missed-ripple, slow the hell down and put some metal in it. Not very slick.