Engrave & Emboss Text Easily In Blender | Part 3 in Text Effects | Create 3D Text Logo In Blender

  Рет қаралды 241,045

5 Minutes Blender

5 Minutes Blender

Күн бұрын

Пікірлер: 286
@5MinutesBlender
@5MinutesBlender Жыл бұрын
𝐈𝐦𝐩𝐫𝐨𝐯𝐞𝐝 𝐭𝐮𝐭𝐨𝐫𝐢𝐚𝐥 𝐰𝐢𝐭𝐡 𝐥𝐚𝐭𝐞𝐬𝐭 𝐯𝐞𝐫𝐬𝐢𝐨𝐧 𝐡𝐞𝐫𝐞: 𝐄𝐧𝐠𝐫𝐚𝐯𝐢𝐧𝐠 👉 kzbin.info/www/bejne/on2agHWQa6Z8jKM 𝐄𝐦𝐛𝐨𝐬𝐬𝐢𝐧𝐠 👉 kzbin.info/www/bejne/rHLVYpR4fq2WrJo
@theycallmehodg89
@theycallmehodg89 2 жыл бұрын
Thank you, this is incredibly helpful when working with text. I refer to this video every once in awhile :)
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Nice to know that you found this tutorial helpful. Cheers bro!
@OneDirection2V
@OneDirection2V 3 жыл бұрын
Thanks you have no idea how much this vid helped me. I watched others videos on the matter and knew the ways to solve the bad topology of the text but you made it so simple that it made it click in my head that there are 3 ways to fix bad topology. Thanks. Just want to add that after doing that sometimes you'll need to tweak things manually using: face orientation view, merge by distance and delete edges in case u run into the problem where there are artefacts when solidifying like it happened to me.
@5MinutesBlender
@5MinutesBlender 3 жыл бұрын
Glad to know that it helped. And thanks for the additional tips you shared 👍👍
@h-unte-r_
@h-unte-r_ Жыл бұрын
I lost a lot of time and couldn't make a uniform text with a surface. But you helped me and showed me a simple example, thanks for this video tutorial.😀👏👍👍👍👍
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Great to hear that it helped! 😊
@thespaundrummer1176
@thespaundrummer1176 Жыл бұрын
Thank you, great explanation. I have 1 question. When I export engraved file as stl, my slicers treat the engraved text as embossed. Any ideas why and how to correct that? TY
@5MinutesBlender
@5MinutesBlender Жыл бұрын
You need to remove the text before exporting, the text is already engraved on the targetsurface, so remove the original text.
@thespaundrummer1176
@thespaundrummer1176 Жыл бұрын
@@5MinutesBlender Thank you, I figured that out!
@smoothmove7566
@smoothmove7566 2 жыл бұрын
Followed tutorial to the "T" worked 100% perfect. Thanks Buddy, It's guys like you that keep this earth a spinnin.
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Great to hear that it helped! Cheers!
@HarryMcKenzieTV
@HarryMcKenzieTV 2 жыл бұрын
i love your tutorials! thank you :) your voice and tone sounds funny though especially when you say "please" do this and that but i like it lol
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Ha ha! I know the voice is not the perfect one. Thank you so much for still liking the overall content 💝
@Karen-Ka
@Karen-Ka Жыл бұрын
You blowed my mind!! I've already known how to make it, but you added a lot of information to my method.. I loved how you clean the mesh before applying the boolean. Thanks a lot.
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Thanks for your appreciation 💝 Glad it was helpful!
@KrixerVR
@KrixerVR 9 ай бұрын
hey i did this tutorial and it was awesome, but i was wondering how do you get them to be one mesh because when i moved my block the text doesnt come with it
@5MinutesBlender
@5MinutesBlender 9 ай бұрын
Hi, you need to "apply" the boolean modifier on your block, then it will become permanent. Apply that boolean modifier and delete the text object. Now you have a single object which you can move, rotate or export along with the engraved or raised text in it.
@danielchiu741
@danielchiu741 7 ай бұрын
awesome video! my only issue is when trying to export is as it's engraved the text still saves as if it's Embosseed. question is how do I engrave it and have it stay that way even when have the "View" for the text enabled?
@5MinutesBlender
@5MinutesBlender 7 ай бұрын
We have shown in the tutorial how to create the engrave/emboss and we have hidden the actual text object. In practice, you need to apply the boolean modifier and delete that text object. Now if you export, both engrave and emboss will work as expected. Please refer to our improved tutorials where this is discussed more clearly 👉 kzbin.info/www/bejne/on2agHWQa6Z8jKM & kzbin.info/www/bejne/rHLVYpR4fq2WrJo I hope that helps.
@danielchiu741
@danielchiu741 7 ай бұрын
@@5MinutesBlender thank you for the help.
@thesellerofsocks
@thesellerofsocks 2 жыл бұрын
Mate this was spot on. Quality and easy to follow!
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Great to hear! Thank you 💝💝
@jamesmontgomery9464
@jamesmontgomery9464 Жыл бұрын
does this convert to a stl file for 3d printing?
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Yes, very much! You need to apply all the modifiers and delete the extra objects (like the text fields) before export. Otherwise Blender will export everything even if they are hidden. This will result into an incorrect output when you 3d print. Clean everything, keep only the target object and then export, it will work.
@dimitrilikissas
@dimitrilikissas 2 жыл бұрын
Is it possible to import vector text from Coreldraw and emboss it? Would this also eliminate the extra lines? thanks
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Yes, we can do that! We can export something in SVG format from CorelDraw, and import that into Blender. You are not importing a "text" in this method, you're importing a 2D or 3D object, which will be converted into path when you import to Blender. You need to then convert this "path" (a set of paths) into one "object". This process is explained in this tutorial although it is on a different subject 👉 kzbin.info/www/bejne/Z2O8poSgaZ2mqJI (skip the initial part and watch from 2:40 onward). Once you have the text imported into Blender, the rest of the process will be same as this tutorial to emboss or engrave it on any surface. I hope you'll be able to put these things together. If you get stuck anywhere, please let us know. You can also contact us via email with your blend file for more help, our contact details are given in the About section of this channel. Thank you!
@artbyyvssvn7622
@artbyyvssvn7622 2 жыл бұрын
Great tutorial! I was wondering though, can I give the engraved text a metallic look? Instead of it just being white?
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Yes, you can add a material of your choice for the rectangular block and the text. If you want to know how to add a material, you can check this tutorial 👉 kzbin.info/www/bejne/nYKZlHx8a86cd9E and if you want to know how to create specific metals like Gold, Bronze, Silver etc, you can check this tutorial 👉 kzbin.info/www/bejne/g6i9k5KsnstslaM
@pingumilk8236
@pingumilk8236 Жыл бұрын
thanks so much ive been strugling for hours trying to find a guide to help me
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Glad I could help! 😊
@TodokanaiKoi
@TodokanaiKoi Жыл бұрын
Incredibly useful. Thank you.
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Great to hear that bro 😊💝💝
@muhammadhaziqhasbullah8455
@muhammadhaziqhasbullah8455 2 жыл бұрын
Are the sample softs there when you open the software or do you have to download them from sowhere
@stoopidbastid6420
@stoopidbastid6420 Жыл бұрын
Thank you for the vid. Would it simpler to just convert the text to mesh and merge by distance, extrude then limited dissolve 10°? I didn't know about the normals smooth thing. I was using rings. Thank you again.
@5MinutesBlender
@5MinutesBlender Жыл бұрын
It can help 👍 but if you are referring to the bevel issues, sometimes bevels become too difficult to manage, specially with complex fonts. There is no technique that works in all cases of bevel. Sometimes it can also help if we create the text through geometry nodes (discussed here 👉 kzbin.info/www/bejne/a4S1mniJfbaeo7s )
@mostafacreative
@mostafacreative 2 жыл бұрын
The Best Explanation !!! I referred to many videos , but out of all tNice tutorials was the best I could find among all .... Also got to know many tNice tutorialngs
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you 💝💝 Glad to know that you found it useful!
@SaneGurung-bs2ne
@SaneGurung-bs2ne 14 күн бұрын
U read my mind tooo watching from nepal
@5MinutesBlender
@5MinutesBlender 14 күн бұрын
Glad it helped! 😊💝💝
@JulioSimónFernández-PradaPaz
@JulioSimónFernández-PradaPaz 2 ай бұрын
This video saves lives, you are the best!
@5MinutesBlender
@5MinutesBlender 2 ай бұрын
Thank you so much for the nice words 😊💝💝
@StygianStyle
@StygianStyle 2 жыл бұрын
I need to do this, but with some decorative details rather than letters/characters. How would I do that?
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
It's same thing. Instead of a text field, you need to create the decorative part as a separate object. Then follow the same process as we did with the text here. If you are stuck at some step, please let us know, we'll surely help.
@StygianStyle
@StygianStyle 2 жыл бұрын
@@5MinutesBlender I looked at a bunch of different methods to create decoration effects on KZbin. I'll have to experiment and see which way works best. I'm creating some leafy decorative patterns on a battle axe blade.
@HarryMcKenzieTV
@HarryMcKenzieTV 2 жыл бұрын
i noticed that when the text or any object is inside the other object and their faces still intersect, the difference modifier will not work. so thats why we need to make it peak out even just by any infinitesimal amount.
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thanks for sharing this!
@chicotemido3647
@chicotemido3647 Жыл бұрын
Thank you. This is how all tutorials should be: Brief, clear and concise. Thanks for your videos and of course I SUSCRIBE
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Glad it helped you 😊💖💖
@sanjeevrverma74
@sanjeevrverma74 2 жыл бұрын
I can feel how happy you are because of the update.
@rahuld5335
@rahuld5335 2 жыл бұрын
I tNice tutorialnk you speak for a good portion of us.
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you so much! 💝
@_bhimsainik_gaurav358
@_bhimsainik_gaurav358 2 жыл бұрын
You've actually got so quality stuff on your channel. Keep that up man!
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you so much for your appreciations 💝💝
@jhonysteak5512
@jhonysteak5512 Жыл бұрын
Absolutly... perfect ! thanks man !
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Glad it helped! 😊
@lavbubl
@lavbubl 10 ай бұрын
I use decimate when I created a sphere and if it’s this useful to reduce text polygons then that’s awesome
@5MinutesBlender
@5MinutesBlender 10 ай бұрын
Yes, it often works great. You can try 👍
@elpiczek
@elpiczek 2 жыл бұрын
Hi. Do you have any tutorial how add Engrave text on 2 or more side?
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
You can do it on two sides by repeating the same process. First engrave on one side, then use the entire object as a cube and engrave on the other side. If you are facing any specific challenge, please let us know. We will help you to resolve it. All the best!
@Duke_of_Dorktonia
@Duke_of_Dorktonia 2 жыл бұрын
well done. clear and concise at a good tempo
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad you liked it 💝
@cward8110
@cward8110 8 ай бұрын
Following these steps worked great in blender for engraving, but when I export s as stl for 3d printing, it doesn’t export the engraved, it exports as embossed, I’m sure it’s something to do with me just holding the text versus something else, but what is that something else to make engraving functional
@5MinutesBlender
@5MinutesBlender 8 ай бұрын
We have shown in the tutorial how to create the engrave/emboss and we have hidden the actual text object. In practice, you need to apply the boolean modifier and delete that text object. Now if you export, both engrave and emboss will work as expected. Please refer to our improved tutorials where this is discussed more clearly 👉 kzbin.info/www/bejne/on2agHWQa6Z8jKM & kzbin.info/www/bejne/rHLVYpR4fq2WrJo I hope that helps.
@swayam9338
@swayam9338 2 жыл бұрын
handy for resetuping s or creating karaoke tracks. Thanks for the recomndation!
@someshsahu4638
@someshsahu4638 2 жыл бұрын
Very nice tutorial thankyou so much 🙏🏼🙏🏼👍🏼
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad it was helpful!
@Hyuts
@Hyuts 2 жыл бұрын
Cyberdyne Systems is taking over this video helped me more than the 2 before it.
@Zimbob2424
@Zimbob2424 4 ай бұрын
I don't know how many time I had to come back here, since I don't do it often enough to remember certain details. lol. But many thanks
@5MinutesBlender
@5MinutesBlender 4 ай бұрын
Great! I hope you have seen our updated tutorials also on this same subject 👉 kzbin.info/www/bejne/on2agHWQa6Z8jKM and kzbin.info/www/bejne/rHLVYpR4fq2WrJo 😊
@stefanocaterina737
@stefanocaterina737 Жыл бұрын
When I apply the decimate modifier to the mesh it is not countig faces at all. Can you help me with that, please?
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Do you have the decimate modifier before or after the boolean? When you apply a modifier, please ensure that all previous modifiers are applied beforehand.
@johnnyliu3D
@johnnyliu3D 2 жыл бұрын
im stuck when i try to bevel the edges ,bc faces will overlap. but I need a bigger bevel tho. any good ideas fixing that?thanks😀
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
I'll suggest you two things. First, we have discussed some common beveling issues and their solutions in this video 👉 kzbin.info/www/bejne/jJXPlHR6a6uFptE You can check that. But it may need you to do a lot of editing to the text mesh. Since we are dealing with a text, my second suggestion is, add sufficient bevel to the text object before you convert it to a mesh. In the text settings, you have a bevel option and it works far better than a mesh. So add enough bevel to the text itself, then convert it to mesh and do the engraving part. Later, you can use a small bevel amount while doing the final bevel on the combined object. Thus the text will have a bigger bevel and the text to mesh junction will have a smaller bevel. I believe it will look good. All the best!
@johnnyliu3D
@johnnyliu3D 2 жыл бұрын
@@5MinutesBlender thank you very much.I fixed the problem by removing some vertex at the corner of the character and it stopped overlapping
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad to know that you solved it!
@kartikswamy3494
@kartikswamy3494 2 жыл бұрын
LOOOL YESSSSSSSS TNice tutorialS COMNT IS FELTTTTT
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you 😊
@EmpathizeVortex
@EmpathizeVortex Жыл бұрын
thank you! the exact option didnt do a thing so i use fast option but it kept messing up the object i was trying to engrave my text into. turns out it was because the object was shaded smooth and had subdivision while text wasnt smooth or anything so it freaked out
@ronk1739
@ronk1739 Жыл бұрын
Excellent video, very helpful, thanks for posting.
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Glad it was helpful! 😊
@SammoStudios
@SammoStudios 2 жыл бұрын
Thankyou amazing tutorial game developer here (kinda) never really used blender however I’m trying to make a memorial bench but I’ve used this to help some of the letters aren’t coming through any ideas on how to fix
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Hi, may I request you to describe the issue little more? I want to know whether these letters are not showing up when you are creating the text field, or if they are not intersecting with the plane while using a boolean.
@SammoStudios
@SammoStudios 2 жыл бұрын
@@5MinutesBlender basically I think I figured it out there’s a T but when you increase the thickness the backside of it gets connected to the top layer in the middle and it makes the T appear as though there’s a triangle coming out of it from the side so my guess is because of that when you hide it it doesn’t actually make contact with the block therefore not making an imprint
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
@@SammoStudios But the other letters have the same thickness and they work fine, right? Do you have a flat surface or a curved surface for the projection?
@SammoStudios
@SammoStudios 2 жыл бұрын
@@5MinutesBlender it’s flat and yes the others do work I assume it’s flat I don’t see why I wouldn’t be
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
@@SammoStudios That's strange. I am wondering why should one single letter behave differently 🤔🤔 Can you please send your blend file to us so that we can investigate it better? Our contact details are given in the About section of this channel (Email is preferred). Thanks!
@ANUJKUMAR-bl9kc
@ANUJKUMAR-bl9kc 2 жыл бұрын
Will stay tuned to your channal! Cheers!
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you 💝 And cheers!!
@balabalan1846
@balabalan1846 2 жыл бұрын
Yoo tnx dude, everytNice tutorialng works. I LIKE IT
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad to hear that, thank you 😊
@Akylex
@Akylex 3 ай бұрын
Thanks for this useful tutorial :3 and explain so good🥰
@5MinutesBlender
@5MinutesBlender 3 ай бұрын
I'm glad it was useful for you! 😊💝💝
@TomGeewhiskeytango15511meterDX
@TomGeewhiskeytango15511meterDX Жыл бұрын
Yup another awesome video! Thank You...
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Thank you so much 💝
@suwaimee4765
@suwaimee4765 2 жыл бұрын
You took the words right outta my mouth.
@cosmicdemise
@cosmicdemise 2 ай бұрын
Great! Thank you
@5MinutesBlender
@5MinutesBlender 2 ай бұрын
Glad it helped! 😊💝💝
@leonardomonteiro1385
@leonardomonteiro1385 Жыл бұрын
This is amazing I subbed
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Thank you so much 💝
@darioburgio7012
@darioburgio7012 8 ай бұрын
Grazie mille!
@5MinutesBlender
@5MinutesBlender 8 ай бұрын
💝💝💝
@hitansh3DArtist
@hitansh3DArtist 2 жыл бұрын
So much thankyou for the tutorial bro
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad to know that you liked it!
@therealb3yond
@therealb3yond 2 жыл бұрын
Perfect tutorial !
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you so much 💝
@qjen8823
@qjen8823 Жыл бұрын
This tutorial was really useful for me❤
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Glad it was helpful! Cheers! 😊
@ZattnerFlytGame
@ZattnerFlytGame Жыл бұрын
Hours searching that thanks 👍🏻🙏🏻
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Glad I could help 😊
@derekstudies
@derekstudies 2 жыл бұрын
Very helpful, thank you!
@dennisroland5654
@dennisroland5654 Жыл бұрын
Great job! Thank you.
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Thank you too! 😊
@Kanye3D
@Kanye3D Жыл бұрын
5 minutes, huh?... intresting and useful chanel
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Thank you bro! 💝💝
@3dblend38
@3dblend38 2 жыл бұрын
Simple and v.helpful Thanks
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad it helped! 😊
@moonchild6952
@moonchild6952 10 ай бұрын
Thanku thanku thanku and another million thanks 🙏😊
@5MinutesBlender
@5MinutesBlender 9 ай бұрын
Glad I could help 💝
@kenalforque3445
@kenalforque3445 2 жыл бұрын
i want to start making soft and rapping i have an acer laptop. does soft soft co with good softs already?
@afsar4681
@afsar4681 6 ай бұрын
Hello, i want to write UNITED AIRLINES for my A320 3d model, how can i do?
@5MinutesBlender
@5MinutesBlender 6 ай бұрын
You want to write means you just want the text on your model, no engrave or emboss? Then follow another tutorial that we made 👉 kzbin.info/www/bejne/l3iwanZsqdOij9k
@iTzVeqaZz
@iTzVeqaZz 11 ай бұрын
When i export that engraved text gets filled up again and stands up from the surface. So Blender exports the not visible objects to my stl file... How can i export without these non visible objects
@5MinutesBlender
@5MinutesBlender 11 ай бұрын
You need to apply the boolean modifier and then delete the text object completely (we only hid it from the viewport, you need to delete it before you export, after the modifier is applied). Also you may want to watch our updated tutorial on this 👉 kzbin.info/www/bejne/on2agHWQa6Z8jKM
@warrior_of_the_most_high
@warrior_of_the_most_high Жыл бұрын
Thank you 🙏
@MicroKhan
@MicroKhan 2 жыл бұрын
Very nice simple and easy tutorial without any other annoying chitchats and lame jokes as most tutorials out there. Only thing annoying in this tutorial is the HARD music. If you reduce the music volume and have soft background music it would be great. Music is not important. Your explanation is important for us to follow. When hard music playing, and directive words it's bit hard to follow. Anyways, Thank you. I really appreciate it.
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you very much for your feedback. Yes, we have also realized that the BGM was loud. Unfortunately, there is no option to remove or change BGM once the video is uploaded. We have learned it over time, and in our later videos we have reduced the background music to a very low level. I hope you will find our recent tutorials free from this annoying factor. Thanks for watching!
@MicroKhan
@MicroKhan 2 жыл бұрын
@@5MinutesBlender Thank you very much simple and quick videos. Please keep up with the good work. I like this types of videos short and simple.
@pondeify
@pondeify 2 жыл бұрын
@@5MinutesBlender just wanted to say, thanks sir for the amazing tutorials . i really like how you get to the point.
@Colab44
@Colab44 3 жыл бұрын
when i tried to take a picture of my model with engraved lettering so I can go and edit in photoshop it turned into embossed lettering pretty. I think it is from when you hide the text. Any work around to this or way to fix it? I love how it came out but want to edit it in photoshop.
@5MinutesBlender
@5MinutesBlender 3 жыл бұрын
From the description of your case, I am making a guess that the text is hidden in the viewport, but it is visible in the render. So, you see the engraved version in the viewport, but when you take the output, you see the text as it is, so it looks like an embossed version. If that is the case, you just need to hide the text also in the render (to do so, you need to enable the filter in the Outliner). Or easier way, instead of hiding the text, simply delete it completely as its purpose is over. Then it won't come in the output at all. And in case this does not fix your issue, you can mail me your blend file and I will be more than happy to look into it & suggest the exact fix. All the best!
@lanciaratzinger
@lanciaratzinger 3 жыл бұрын
@@5MinutesBlender fantastic, same problem, immediately solved, thanks for the question and for the answer 💪
@lgtv915
@lgtv915 2 жыл бұрын
Many thanks mate
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
You're welcome bro!
@wesleytillman9774
@wesleytillman9774 2 жыл бұрын
Very good.
@Infinitends
@Infinitends 9 ай бұрын
ok boom, but i done the cube and wrote something and i want to remove it , is it possible w/o destroying the whole damn cube? :)
@5MinutesBlender
@5MinutesBlender 9 ай бұрын
Yes, you can apply the boolean modifier on the cube, it will make the engraved/ embossed or raised part permanent. You can then remove your original text, the effect will still last. Please let me know if this does not solve your requirement.
@Infinitends
@Infinitends 9 ай бұрын
i managed to fix it by using delete vertices on edit + xray and wireframe with box select , im too new to this "bender" so i got no idea how to use boolean , will try this today , cheers mate.
@isabelpata334
@isabelpata334 2 жыл бұрын
tNice tutorials dude makes tNice tutorials easy! I wish he would have been my Nice tutorialgh school maths teacher
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Happy to help! 😊 Thank you!
@maurojuri3124
@maurojuri3124 2 жыл бұрын
thanks so much man
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad it helped!
@Shiafuji
@Shiafuji 3 жыл бұрын
Hi! Intead of engraved, my text looks like only the outline of it is engraved. I wanted the whole text engraved, like yours. Is there a solution to that? Thank you.
@5MinutesBlender
@5MinutesBlender 3 жыл бұрын
To suggest you best, we need to look at your blend file. You can email the same to me (contacts given in the About section for this channel). Otherwise I can just guess that probably you have not made enough overlap between the text and the target object. There has to be a good amount of overlap, so that it creates a "cut". Just "touch" is not enough. Whether that was the issue in your case or it is something else, I can comment on that once I can take a look at your blend file. All the best!
@Phuskooz
@Phuskooz 2 жыл бұрын
It worked for me after I stopped trying to apply the engraving from the underside and applied it from the top side by mirror flipping my object
@KrabeGaming
@KrabeGaming Жыл бұрын
Thank you
@diambangfajar5776
@diambangfajar5776 Жыл бұрын
But how about all topology... What happen to that mesh if we put the Sub D
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Better to add subdivisions before you perform or apply the boolean modifier. Ideally it should be the last step.
@slade1319
@slade1319 Жыл бұрын
thank you so much
@andrewtimmins
@andrewtimmins 2 жыл бұрын
Every time i export it as an stl file the text isn't engraved, I've checked the comments section but I cant see any with this issue could you help please. Great tutorial though
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
It should work. I tested this. First you have to apply all the modifiers. Then delete the text objects altogether leaving only the primary cube with the text engraved. Now export it in stl format. I verified that by opening the stl file in Window's default 3D Viewer. It looks as expected.
@andrewtimmins
@andrewtimmins 2 жыл бұрын
@@5MinutesBlender Thankyou so much i forgot to accept the modifiers for the cube, it's working perfect now. Have a good day and thanks for the help :)
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
@@andrewtimmins Glad to know it has worked! Cheers!
@lassejensenyt504
@lassejensenyt504 2 жыл бұрын
the biggest legends in the rap industry, biggy. You just need to creative and know your way around the software imo
@SlickFX_Trader
@SlickFX_Trader Жыл бұрын
Very helpful mate. I have added you to my browser folder named Learning. Thank you and sub'd!
@5MinutesBlender
@5MinutesBlender Жыл бұрын
Awesome, thank you too! ❤️❤️
@saahilshaikhrocks
@saahilshaikhrocks 2 жыл бұрын
like u read my mind
@roastingminer6919
@roastingminer6919 3 жыл бұрын
Is there any way to paste a certain text instead of typing?
@5MinutesBlender
@5MinutesBlender 3 жыл бұрын
Yes, of course. Add a text field, go to the edit mode, and use control-V. Whatever text you had earlier copied, will be pasted. But if you have any special character, you need to use some special font, otherwise it won't display correctly. This part has been explained in this tutorial 👉 kzbin.info/www/bejne/g3jKpJyvndN9ibM
@roastingminer6919
@roastingminer6919 3 жыл бұрын
@@5MinutesBlender thank u very much
@indresh86singh
@indresh86singh 3 жыл бұрын
Nice tutorial
@spikethegamedev3dprinting317
@spikethegamedev3dprinting317 2 жыл бұрын
when i save the file a and open in in cura it has nomal 3d text how do i fix?
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
In the tutorial, we have only hidden the original text. It needs to be deleted or removed. Do that only when everything is final because you cannot edit the text after you delete it. Please render the output and verify that it looks correct. Then you can go for export.
@gauravey1722
@gauravey1722 2 жыл бұрын
i have no idea why, but hearing your voice just makes feel soothed.
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you!
@ContinuedOak
@ContinuedOak Жыл бұрын
It’s an ai tho
@lizergr7848
@lizergr7848 2 жыл бұрын
!!! Thanks a lot ...☺️☺️
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad it helped! 💝
@webislands1575
@webislands1575 Жыл бұрын
in last version of blender text option is not present ... i am new need help try version lts 3 or 2
@5MinutesBlender
@5MinutesBlender Жыл бұрын
You get the Text option under the Add menu when you are in the object mode. It did not change even in the latest version. If you are not able to see that in your menu list, can you take a screenshot and send across to us? Our email ID is 5minblender@gmail.com
@SHISUI30
@SHISUI30 2 жыл бұрын
It's my first day of soft School, and I can tell I'm going to like my teacher!
@venkateswaran_muthupandi
@venkateswaran_muthupandi 2 жыл бұрын
just got soft soft and I feel like a kid on christmas morning
@manatotal
@manatotal 2 жыл бұрын
where can i get blender for mac
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
For macOS: www.blender.org/download/release/Blender3.0/blender-3.0.1-macos-x64.dmg/ and for Apple Silicon: www.blender.org/download/release/Blender3.0/blender-3.0.1-macos-arm64.dmg/ (available on Blender download page: www.blender.org/download/)
@snek6769
@snek6769 2 ай бұрын
one of the view rare instance where the AI voice is used for more than 20 seconds
@NerdyVet
@NerdyVet 2 жыл бұрын
wow - perfect video, exactly what I needed. Works for logos as well fyi 🤩
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thank you so much! Glad to know that it worked for you 😊
@NerdyVet
@NerdyVet 2 жыл бұрын
@@5MinutesBlender you're welcome. At the moment I'm still a student and my budget does not allow it, but I subscribed to your channel and when I'm earning money I will also donate something. Until then, there is just "only" my thanks, but it comes from the heart. 😙
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
@@NerdyVet I'm really happy that we could help you in the learning. Money is secondary and it's not so important. I wish you all the best in your academic career 💝
@KorinnaImle
@KorinnaImle 2 жыл бұрын
@@5MinutesBlender thank you so much - I wish you (and your team, if there is one?) a huge amount of success with your great work 🙂 Looking forward to see more of your content
@yesman.
@yesman. 3 жыл бұрын
Good man thank you
@5MinutesBlender
@5MinutesBlender 3 жыл бұрын
No problem 👍
6 ай бұрын
when I solidify the text I get spikes on the letters t. How can I solve this? thanks
@5MinutesBlender
@5MinutesBlender 6 ай бұрын
Try to create the text using geometry nodes, it may yield a better result. We have a tutorial on this, it may help 👉 kzbin.info/www/bejne/a4S1mniJfbaeo7s
@lermabeats
@lermabeats 2 жыл бұрын
Im trying this on a plane and it is not working. Any tips?
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Are you trying engraved or raised letters? A plane does not have a thickness. So if you try the boolean operation, it may not work correctly. It will cut through the plane. Try to add a thickness to the plane, or better still, use a cube (instead of the plane) with a very low thickness.
@lermabeats
@lermabeats 2 жыл бұрын
@@5MinutesBlender i guess you cant engrave planes. Thanks for your help!
@Bluemograph
@Bluemograph 3 ай бұрын
i dont expect to do just this is so complex
@5MinutesBlender
@5MinutesBlender 3 ай бұрын
No need to worry! If you practice it several times, you will easily remember the steps and it will be fast. You can do everything within 2 minutes after some practice 😊
@kenneth6989
@kenneth6989 2 жыл бұрын
If anyone has any doubts this list still works in 2022
@CopperStateCustomAdmin
@CopperStateCustomAdmin 2 жыл бұрын
exporting this to STL on my prusa slicer I cant get rid of the embossed text sticking out of my object. Im trying to engrave.
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Hi there! My quick guess is, you are probably getting the embossed object along with the original text over it, so the text is sticking out of the object. You have to simply remove the original text. Just delete it after applying all the modifiers, hiding it in the viewport is not enough. Hope that resolves the issue. Please let me know if otherwise.
@CopperStateCustomAdmin
@CopperStateCustomAdmin 2 жыл бұрын
@@5MinutesBlender Thanks I'll try that
@bbtoon
@bbtoon 2 жыл бұрын
The first video I've found wNice tutorialch makes production seem accessible, thanks!
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Glad it was helpful! Cheers!
@asnshp
@asnshp 3 жыл бұрын
thanks, very helpful
@hasiniariyadasalk
@hasiniariyadasalk 2 жыл бұрын
wow, Mylosp has alot of fans ngl. but thanks doe.
@w0lfy89
@w0lfy89 3 жыл бұрын
Is there a way I can rotate my object and the engraving with it?
@5MinutesBlender
@5MinutesBlender 3 жыл бұрын
Yes, of course. The engraving is a permanent modification to the target object, which stays with the object. Not only you can rotate it, but you can also move it, scale up or scale down, or do anything like a normal object, the engraving will go with the object. In case this is not happening in your case, please check if all the modifiers are "applied", and then remove or hide the text (the source object for engraving). If still not resolved, I need to look at your specific blend file, to figure out what is going wrong. Thanks for watching the tutorial.
@w0lfy89
@w0lfy89 3 жыл бұрын
@@5MinutesBlender I think that's what I did wrong. I don't remember applying the solidify modifier
@zgv111
@zgv111 2 жыл бұрын
Blender 3.0 Type your text on a right hand side press "a" letter slightly below spanner Geometry - Extrude and set it say 0.2 Much easier, but boolean for engraving is a very good idea, not just with fonts but say - if you want to make a shaped size hole etc
@5MinutesBlender
@5MinutesBlender 2 жыл бұрын
Thanks for sharing 👍👍
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 11 МЛН
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 148 МЛН
Человек паук уже не тот
00:32
Miracle
Рет қаралды 3,6 МЛН
Convert 2D Logo to 3D | Blender 3.0 tutorial
5:59
Balu Prime
Рет қаралды 231 М.
Emboss Text onto Curved Object Using Blender
2:53
3D Printer Academy Tutorials
Рет қаралды 50 М.
Why do Studios Ignore Blender?
8:52
Film Stop
Рет қаралды 122 М.
The RIGHT way to cut holes in surfaces in Blender
10:52
Josh Gambrell
Рет қаралды 1,2 МЛН
Let's Learn Blender! #7: Knife & Bisect tools!
21:47
BornCG
Рет қаралды 85 М.
3D Text in Blender: Everything You Need to Know!
7:40
Brandon 3D
Рет қаралды 128 М.
10 Tools Every Blender Noob Should Learn
9:44
Brad Colbow
Рет қаралды 980 М.