5th gen 4runner Accessory Tray Installation Guide

5th gen 4runner Accessory Tray Installation Guide

[@d.phothirath5084]

I just purchased this from C4 !!! Wow 🤩 for the $ and quality you get !!! Plus they used existing bolts on the 4Runner for easy installation. 🤘🏼

[@AndrewA6]

seriously...powertray one is kind of a rip off right???

[@jeffreyreichert1609]

With 2020 and up you will have to remove the secondary fuse box as it uses the same mounting point. I just unbolted mine and zip tied to the tray.

[@uberoverland]

I was just about to ask about that.

[@dennisi3921]

Be careful. The edges are so sharp. I got a big cut on my hands. I ended up filling it.

[@dave1096]

My 12' does not have that harness on the fender well. It does however have the hole with the nut fixed to the underside. However.... that hole along with 4 others that have the nuts on the underside still have the piece of sheet metal punched still stuck in the nut. Grab a nail a pop it out, trying to thread the bolt through did not work for me. In addition, because the nut was blocked by the sheet metal punch the nut then held water and rusted the threads as it just held a drop of water. So, drill it out i guess and run a bolt and nut.

[@riasonrivera7959]

Do you guys have the link for this item? Can’t seem to find it on the website.. thank you

[@c4fabrication397]

c4fabrication.com/collections/4runner-2014/products/4runner-engine-bay-accessory-tray-driver-side-2010

[@Dayota___]

Uhg this wouldn’t fit on my 2022 4runner😭