2015 Camaro SS on the dyno. The car ended up making 673HP while spinning. It was around 25 degrees. Mod list- LSA blower, BTR stage IV cam, McCleod twin disc clutch
Пікірлер: 45
@stephenlee25489 ай бұрын
That car should have a warning that says “Dosent play well with others “ lol😅
@WickPerformance Жыл бұрын
Sounds good
@BrianEstrada-hl5yo2 ай бұрын
What’s the wheel tire set up
@xanxiiety8749 Жыл бұрын
Did you reforcé the axle’s with the g force or is it running stock axle’s?
@Kibz32 Жыл бұрын
They are still stock.
@xanxiiety8749 Жыл бұрын
@@Kibz32 is it safe to drive w radials/welds I’ve been thinking about getting some I’m running magnuson sc kooks and meth Injection & how much hp you running to see if I’m fine/safe, I’m around 550-600hp
@Kibz32 Жыл бұрын
Yes. The only place you would have an issue is at the track. You would snap an axle pretty quick. I only drive mine on the street.
@Ls3_cy3 ай бұрын
thinking about boosting my camaro only got cam supporting mods, did you have to build the motor or is it stock bottom end
@Kibz323 ай бұрын
Still stock bottom end. They say as long as you don’t go above 10lbs you will be good for awhile.
@Ls3_cy3 ай бұрын
@Kibz32 if you don't mind me asking are ypu still stock heads/fuel and did you have to do springs, lifter, trunions, etc
@Kibz323 ай бұрын
@@Ls3_cy still stock, and yes did lifters, springs, push rods, but did not do the trunion mod. Too many stories of the needles flying out and ending up in the oil pan. That’s what I’ve heard anyway. Also Zl1 fuel pump. At this power level it’s close to maxing out the pump.
@Ls3_cy3 ай бұрын
@Kibz32 thank you for the info, I've been thinking heavy on doing nitrous or boosted. Made the choice alot closer 😂😂
@user-wu7es2eh4o13 күн бұрын
Sweet🤙
@tirsogarza6799 Жыл бұрын
What’s the wheel and tire setup if you don’t mind sharing? I’m trying to get some aftermarket’s for my 2014 Camaro ss
@@Kibz32 thanks for the reply, setup looks clean. I think I’m going to order some weld lagunas
@tirsogarza6799 Жыл бұрын
@@Kibz32 do you have the big Brembo brakes? I’m not sure my car will fit 17s
@Kibz32 Жыл бұрын
I believe I have the smaller ones. Zl1 are the bigger correct?
@tirsogarza6799 Жыл бұрын
@@Kibz32 just depends on how the car was built, mine is a 2014 1SS with all the options available for a 1SS
@trevorchichester8550 Жыл бұрын
Stock pulleys?
@Kibz32 Жыл бұрын
No it’s got a 2.4, makes 10lbs
@Ws6Ms Жыл бұрын
Stage 4 na or lsa camshaft?
@Kibz32 Жыл бұрын
BTR stage 4 NA Cam
@Ws6Ms Жыл бұрын
@@Kibz32awesome build
@quentinboyd2286 ай бұрын
Is this the f35 cam?
@logannash5472 Жыл бұрын
what’s the ig?
@Kibz32 Жыл бұрын
?
@captainohsowavy Жыл бұрын
I’m confused why install a NA cam?
@Kibz32 Жыл бұрын
Cam was already in the car and then ordered the SC. Plus a supercharger doesn’t care if the cam is made for na or boosted. Still works the same.
@mikewilson83315 ай бұрын
@@Kibz32 different cams do make a difference.
@Kibz325 ай бұрын
@@mikewilson8331of course they do and that’s not what I said. And look through my videos I think I know what cams do. I just get the comment all the time about how n na cam won’t work or will run like shit with a blower.
@loganhigginbotham8017 Жыл бұрын
E85???
@Kibz32 Жыл бұрын
Nope just 93.
@loganhigginbotham8017 Жыл бұрын
@@Kibz32 hell yeah gonna be running a similar setup
@Kibz32 Жыл бұрын
@@loganhigginbotham8017 ya if I go e85 I will probably need a different fuel system. I have a Zl1 pump and I’m pushing it almost to its max.
@loganhigginbotham8017 Жыл бұрын
@@Kibz32 is it just a zl1 pump? Or do u have a bap
@Kibz32 Жыл бұрын
@@loganhigginbotham8017 no bap
@jasonsmith35373 ай бұрын
Fuel AND oil coming out of that one....
@Kibz323 ай бұрын
What are you talking about
@rogeliolopez25946 ай бұрын
Like 600 to wheels 🛞 if that
@RandomGuyAgain5 ай бұрын
It was 670.
@BrianEstrada-hl5yo2 ай бұрын
What’s the wheel tire set up
@Kibz322 ай бұрын
Weld 17’s. Rears are 305/45-17
@BrianEstrada-hl5yo2 ай бұрын
@@Kibz32 great job …. I really like how it looks What’s the size in the front ?