5W Laser (LT-40W-AA) Stainless Steel Color Engraving

[@robertmihalyfi4901]

Can you make another video with this special laser module please? Cutting some wood for example. I can't find a decent video about this module. Thank you!

[@hervepilot]

Une super marque. J’ai équipé ma sculpfun S30 avec une de tête laser de 10w et je suis aux anges.

[@spiritburners]

Hi thanks for this what thickness is the stainless please and does it make a difference to the colours you can get Thanks

[@robotron26]

How long did this actually take? Curious about how much i can make here

[@toninobelnobel8510]

Good video I'm new to this Can you provide the template to do this test?

[@danokmec6993]

How setting to use :(

[@UYC.]

What specs you guys use mm/s and laser power?

[@Lasertree]

Speed and power of attack is variable. You can go to our website and ask our customer service for specific documents.

[@brunofporto]

Just bought it thinking it was a 40w laser module 😡.... What thickness of wood can I cut with these 5w??

[@Lasertree]

We will sell it clearly labeled as a 5W output. You can refer to this cutting data:lasertree.com/pages/laser-module-cutting-data

[@brunofporto]

​@@Lasertreewell it is CLEARLY named LT-40W......

[@brunofporto]

​@@Lasertreebut thank you for the cutting data. That will be of great help. :)

[@brunofporto]

@@Lasertree my point is: naming this module as 40w is a shady tactics that should be confined to lesser brands. You are a respectful brand. Please do not name your devices in this manner in the future. It only looks bad from the client point of view. When I bought it there were several other lasers on the same AliExpress page to select from. I wrongly thought that the 5w of the description was for another module available as the name clearly says "40w". The same issue happens with the LT-80W... It is not 80w of optical power ..... Even though it is the rated consumption power this is a misleading name for the module.

[@AGAsVision]

Hi, how you engrave with colours? It's a program or the laser support colour engrave? Or both?

[@deviatixn2202]

Its metall gradient, laser just burn a layer of metall

[@eyes2videos]

Stainless Steel Type pls? 316L , ....?

[@toninobelnobel8510]

Buen video soy nuevo en esto ¿ podeis poner la plantilla para hacer esta prueba ?

[@Lasertree]

You can go to our website to find customer support to provide test files.

[@asedased8501]

у меня этот лазер не режет фанеру 3 мм

[@АлексейТихий-н6у]

У меня тоже, а на метале даже следа не оставляет

[@АлексейТихий-н6у]

Разобрался почему лазер не резал 4,5мм фанеру. Был запитан от китайского бп12v 3,5А. Но замеры показали всего 1,9А. После замены блока питания фанеру грызет , но сильно обугливает кромки. Ну и конечно же обязателен обдув. Если работал без обдува по дереву, то меняй защитную линзу

[@asedased8501]

@@АлексейТихий-н6у было дело в линзе, маслом запачкало

[@yurimakarov6214]

Its lie. I dont know the exact specification of the steel but i also tried with 5 type of steel , none of them worked. They must be specifically declare the steel type otherwise it is useless