6.0 Shift on the fly tuning and ITS switch box install.

In this Video we go over the 6.0 Shift On The Fly tuning from ‪@BlessedPerformance‬ and installation of the switch box I designed with them.
You can find the tuning and the box here: blessedperform...
Custom Tune Loading video: • 20,000 SUBSCRIBER GIVE...
IN THE SHOP shirts: in-the-shop.cr...
Instagram @_intheshop_
tiktok: intheshop1
Email: [e-mail]
Please consider donating on my Patreon account. All donations go directly towards making more videos for all of you: www.patreon.co...
Affiliate links may be used. Using these links doesn't cost you any more but I do make a small portion from all purchases.
My amazon Store: www.amazon.com...
#turbo #powerstroke #boost #tuning #SOTF

[@stevenfuchs2548]

Truck looks cool, sounds cool and fun to drive, thanks for the video, always a good time!

[@a.hagler3777]

Love seeing the progression of this truck! So clean! Def needs a HHPE (Hoosier Hills Performance Engineering) Core Support Cover! They just released one for our trucks!

[@antn8387]

very clean build.

[@AndrewCisco]

Nice 6.0, I would like to install this into my welding rig.

[@stevenraymer6682]

Man that’s awesome as hell can’t wait to get mine.

[@InTheShop]

Pretty cool stuff!

[@realtoytrains]

Gonna need this for sure!

[@VanisonZore]

this is what i need for my 05 xl im rebuilding new heads up. she didnt blow but i wanted to stud and o ring, and put bigger parts in her

[@BlessedPerformance]

Stellar video my man!!! Love it!

[@tristanwilson5957]

i need to see a full pull on this truck ha

[@MartinDistelbrink]

Hi just wondering how to get a hold of you for a repair on my truck

[@gamingben9093]

hi Emily said hi

[@outlawcustoms3624]

Good morning I have a question about my 05 f-350 6.0….its been bulletproofed before I got it and the glow plugs with harnesses was changed as well, I don’t really drive it much but about 2 years ago it was running fine idling good & I noticed a whistling noise coming from somewhere never could find the noise I parked it & that was it however next time I went to use it it starts but immediately shuts off I hold the throttle halfway down it’ll run but as soon as I lift off it shuts off, driving is the same thing I drone with two feet but as soon as I come to a stop it shuts off but starts back up & runs with me keeping the throttle halfway down I stink hear the whistling noise but I’m unsure what to do at where to start to correct this issue can you please guide me in the right direction on what/how to fix it thank you & look forward to hearing from you

[@God-Guns-and-Fun]

So I just got mine, and I’m not much of a truck guy, but I am slowing learning. I don’t understand the instructions for installing this box on a truck that has cruise control. Can you inform me on how I am supposed to do that? Also is this plug and play? Or am I going to need to have blessed performance rewrite my tunes for me for this to work? Thanks

[@InTheShop]

If you are looking at the back side of the connector where the wires come out using the picture on the instructions to show the orientation of the connector. Cut the pin off the blue wire on the switch box and crimp on the other red spade connector. Use the scotch lock to connect to the 3rd wire up on the right which would be the same spot you would slide the pin into if you didn’t have cruise control. Then connect the black wire with a scotch lock to the green wire with the orange tracer. You will need to have blessed rewrite your tunes for the shift in the fly function.

[@God-Guns-and-Fun]

Awesome! Thank you sir!

[@flattiresmisfires]

I need your help to get my 6.0 ps in my 64 Pontiac running right, I got rev limiter issues when in race tune

[@InTheShop]

Shoot me an email. [e-mail]

[@jeffroembke8232]

If I already have an sct tuner with all three of blesseds tunes. Will all I need to do is install this box or will I need to download any other tune/software? Thank you

[@InTheShop]

The Shift on the Fly tuning is a whole new tune so you will have to contact them and have them write a new one for you.

[@MartinDistelbrink]

Hi just wondering how to get a hold of you for a repair on my truck

[@InTheShop]

Hey Martin, I’m currently not taking on any customer work.