6,144+ HP! Highest HP ever recorded on a HubDyno. Turn up the volume!

[@rtz549]

Nitrous? Why not run the 116mm turbos? Is it just my imagination or Did at one time; Turbonetics had like a 125 or 135mm turbo?

[@dennisrobinson8008]

its crazy the turbo whine exceeds the engine noise at a certain point

[@Kaletreii]

@Dennis Robinson, just imagine If you was there!….I’ve never seen a Turbo car cut out the New IPhone plus and he was standing about 30-40 Ft away and they still cut the microphone off!!…..It sounded like something from out of Space, with Turbines!!!

[@dennisrobinson8008]

I would have to be in that room to understand. I have no doubt someone could feel the pressure

[@brianspangler3771]

I actually remember this car. It was featured in Hot Rod magazine several years ago. The engine was built by Moran Racing Engines and they tried to run it on their engine dyno but made "only" 4400 hp because the water supply to the dyno started getting too hot.

[@Kaletreii]

ago @ Brian Spangler oh yes they kept running out of fuel then air, but since that magazine article he had done some serious adjustments if you Also remember he produced a 570ci that made 5295HP so the owner now has those 106mm turbos and some more adjustments and he even got a set of 118mms but I don’t think he need those!….but these new turbos that’s currently on there are a monster!!!…so they figured it out as time progressed!!….

[@EnglertRacing96]

The dyno was not the problem the 95?mm turbos were too small

[@EnglertRacing96]

@@Kaletreii wonder if the 6100hp is with the 105 or 116?

[@Kaletreii]

@EnglertRacing96 those are 108mm turbos and they have a set of 118mm turbos and those has never been used before!…that 6,144HP was achieved with these 108mm @ 8300RPM and the engine RedLines @‘11,000RPM this thing is complete Beast!!…This has got to be the Baddest Car on the Planet!!…..The size of that motor and turbos are Freaking Insane!!!

[@brandonweeks]

Seeing this go down the track without spinning would blow my mind

[@Kaletreii]

Actually it went down and was spinning and still ran a 3.56 @ 217mph that was insane

[@americannostalgiagarage]

Absolutely insane. The microphone couldn’t even pick up the pitch of the turbos they were screaming. Very impressive.

[@Kaletreii]

@ American Nostalgia Garage, that’s the first time I’ve EVER heard the Microphone being cutout and he said he was atleast 30Feet away with the Latest IPhone Plus Pro Maxx that’s Some “Jedi” StarWars Type Shit!!!…

[@jasonmenard1073]

I wana see more of this chevelle. This is a radical car

[@Kaletreii]

Thanks and we will get you more of it Jason!….it’s a Beast!

[@topenddean]

Holy Horsepower Batman!

[@precisionpower2459]

And then some.

[@bruceh9999]

Damn! That is gnarly!

[@EnglertRacing96]

When are we going to see some more passes

[@DynocomNet]

Amazing 👏

[@precisionpower2459]

Thank you! Cheers!

[@Blizzard020]

Would be interesting to see this set up on E gates and full vps

[@sheldonpillay7767]

Those are some absolutely mind blowing figures but let us all not loose sight of the fact that a Pro Charger and a Screw Blower would still run out on this cars life...PS wouldn't mind being proven wrong

[@Kaletreii]

@ Sheldon Pillay Trust me a Screw Blower and Procharger would get their Ass Handed to them!….Allow me to Enlighten you on what type of Beast this is!…..Go lookup the Fastest pass in Doorslammer Side by Side History!…..The race was about 10 yrs ago!….. Frankie “Mad Man” Taylor in his screw blower was running “El General’s” twin turbo Hemi!!…. That Blower Car got out ran by double digits my friend, that blower car was ahead @ the 330 Cone but Frankie Taylor said that turbo car blew by him like he was sitting still @ the 1/4 cone!….. and that was a 526ci twin turbo Hemi! This is a 670ci Twin turbo Hemi brother!…. This thing will eat the hell out of a Blower or Pro Charger Car!….. I’ll include the link to show you why this monster is way more Lethal and a lot more Sinister than anything you have ever seen!!!!

[@Kaletreii]

Here you go sir!….. please enjoy m.kzbin.info/www/bejne/jZiupXR4oJaDhsk

[@sheldonpillay7767]

@@Kaletreii Hey Brother thank you for relying , in that race Frankie lost by 2 10ths of a second and 9mph out the back and also it’s rumored that car is also using nitrous to help it spool so consider it using 2 power adders now consider this Frankie was running a BAE hemi with a PSI screw blower now if you factor in todays latest and greatest technology you can make the argument that car would easily run 5,3s or even 5,2, , here’s a Video of John Zapia hitting the 1/4 mile in 5,42 …4 10ths faster than the Turbo Camaro , bare in mind Johns car is a *CLUTCH* car let that sink in…that’s manual shifting and manual launching in the post interview he mentioned he staged too deep and couldn’t get a better launch and run a way faster time here’s the link kzbin.info/www/bejne/pKu6oISGd9Gsa6c Now bare in mind that’s a 4,9 Noonan which is banned from NHRA , as of this year Screw Blowers are back but boost restricted now ask yourself this if turbo cars was so dominant why are screw blowers banned and if they aren’t have weight and boost restrictions put on them and in a hypothetical sense Turbo perform out the banned hence why they getting out 60” ,330” and even 660” by screw blowers and pro chargers their Power delivery is different to other power adders and as of late the mph difference isn’t what it used to be hence why the NHRA promod record is Justin Bonds Procharger Camaro , RVW record of 3,498 is held by Daniel Pharris and the overall 1/8 mill doorcar record is Frankie Taylor @ 3.485 which equates to a 1/4 mile of 5,2ish thou my maths not accurate need more info have have a 100% answer factor this

[@Kaletreii]

Yes I I understand what you were saying but as I was also saying this 670 twin turbo hemi, its a freak of nature regardless of those other Hemi’s that you were speaking of they don’t have the displacement cubic inch that this monster has, now just for the record I’m gonna send you a video from the owner that ran a 3:43 @ 237 mph with this Chevelle although this car is built for the 1/4 people are running mostly 1/8!….even when they spun 30-40ft it still ran a 3.56 @217mph!…..this car was built for the pro extreme!….we know that the size is the engine has a lot of people saying it’s too big but they had no rules in pro extreme and also don’t forgot that that Lexus Twin Turbo ran 5.30’s and that el general corvette ran a 5.40 also a twin turbo!….so either way Turky ran Frankie Taylor Down!!….that’s so impressive nobody can ever top that race!!…..So blower and Pro charge cars are fast!….But with this Chevelle this is a completely different animal and I respect it with what it is and that’s not of this World 🌎

[@Kaletreii]

I see that blower car was titled “the unofficially fast blower door slammer and it ran a 5.42 but look how this twin turbo Hemi Corvette was titled officially ran a 5.40 and it pulled the chutes out early!….so in that race that twin turbo Vette would have ran that blower Camaro down!…. m.kzbin.info/www/bejne/hWGzaKOPatB7ZtE And then that twin turbo Lexus ran 5.30’s let’s not forget that

[@FCR3399]

this shit is frickin fast man can't wait for it doing a pass

[@Kaletreii]

Of course brother it did a 3.43 @ 237mph when he tested it a few yrs back

[@FCR3399]

@@Kaletreii no 1/4 mile?

[@Kaletreii]

It ran a 5.39 @ 287mph and we can get more out of it

[@FCR3399]

@@Kaletreii is there any footage of it tho?

[@Kaletreii]

Yes go to their IG page

[@dennisrobinson8008]

it exceeded hypersonic and they shut it down

[@flexch2011]

I remember Mike Moran, he's a beast for sure , he try making a quad turbo Camaro, it was white and named Casper, I guess the unfriendly ghost LOL back in the day ,but the Technology wasn't their yet...

[@Kaletreii]

Exactly he is before his time

[@flexch2011]

@@Kaletreii definitely, I always wondered if him and Steve Morris teamed up they would make something Legendary. ...!

[@Kaletreii]

@Flexon’em hell yea they would and I like Steve Morris

[@MAPRTX]

now thats bad azz

[@Kaletreii]

Thanks MAPRTX

[@cliffscheers8752]

👍👍👍👌💪💪💪

[@Kaletreii]

Thanks Cliff

[@Thors_Garage]

What turbos are those? The biggest turbo I know are 118mm from Precision turbo at 2800hp each

[@Kaletreii]

Those are 106mm and he got a set of new turbos that are rated @ 3500hp each

[@Bon_Lou]

To be specific its either a Garett GTX5544R or the G55-3000 Series turbos

[@rolltide9547]

It has twin 75mm doublers. They are only 75 mm but perform like 150mm because they double the power when on boost. They use titanium exhaust wheels and ceramic bearings and a special oil pump for the turbos that run at 300 psi.

[@Bon_Lou]

@@rolltide9547 pretty sure they don't use 75mm turbos, its clearly a Garrett GTX5544R 106mm Twin Turbos or Garett GT57-3000 106mm Turbos, and if they do want to have a bigger turbocharger its better to use a Harts Turbochargers 140-145mm turbo, and they wouldn't be using ceramic for 6000 Horsepower they are probably using Billet Aluminum, and they are probably using a Moroso 5 Stage dry sump oil pump or a Moroso 6 Stage dry sump oil pump commonly used in topfuel dragsters

[@rolltide9547]

@@Bon_Lou These turbos are from turbonetics. Doublers mean a 75 mm has the same power as a 150mm. It is like 300 mm of turbo total.

[@EnglertRacing96]

Hello? Any updates?

[@bastardsonofodin4931]

....would not have been standing with nothing between me and that engine. Brave, confident or stupid.....it all looks the same at some point.

[@Kaletreii]

@ Bastard Son of Odin, did anyone ask you to stand anywhere? Is anything gonna change in the video by making such a stupid comment? No nothing has changed and nobody needs your opinion! Let people do what they want, and just enjoy the damn video man!

[@RedditHorrors777]

What’s it’s quarter time 5 sec at like 280 I’m assuming if the eighth is over 235

[@Kaletreii]

@ Alec Daniel767 I think it ran in the 5.30’s and this Thing be Moving and Break into the Wind Unlike Anything on Earth!!!!

[@Kaletreii]

You was very close it clocked 237mph in the 1/8

[@js74john]

Who drives the car and is it going full 1/4 mile ?

[@Kaletreii]

The owner can definitely drive it but he would rather watch it perform

[@Eazy_tuned]

How many injectors does it have ?

[@Kaletreii]

It has 16 injectors!

[@precisionpower2459]

16 my friend

[@DM-qp7do]

HO LEE SHIT 🤣👍🏁🏁🏁

[@zingzong5]

What size turbos?

[@precisionpower2459]

106mm x 2. 670ci billet block.

[@zingzong5]

@@precisionpower2459 damn, things a beast!

[@Kaletreii]

Thank you Sir!

[@Kaletreii]

Oh yes its Definitely a 5.30’s car in the 1/4th

[@unknownbikes5178]

@boumahdi salim 🇩🇿 279mph I believe.

[@roxxas5]

Absolutely disgusting where can I get one

[@Kaletreii]

@Roxxas5 Lmfaoooooo…..Yes we want one of these Bad Boys!!!!!

[@tylerdye7156]

Would love to see this thing on some 315 radials could you imagine

[@Kaletreii]

Omggg that Bitch would be Screaming lol

[@BigKandRtv]

I can, but then again I don't want to see this car get tore up.

[@Kaletreii]

I agree I wouldn’t want to see anything happen to this 1 of 1 MasterPiece! Jerry Bickel only created 1 mold and this is it!….

[@CRDavis-pj4zh]

You do know that they can inflate numbers right show back to back with a regular hp car and then this car all on sae not the one that is inflated

[@Kaletreii]

@ C.R Davis dude please take that BS elsewhere!…nobody needs to inflate anything you know nothing about this car! If 526ci twin turbo Hemi’s are making 4500hp-5000hp then what do you think a 670ci twin turbo Hemi will do!…go play somewhere!….if you are really into this then you should know this same builder Mike Moran took a 570ci twin turbo Hemi and made 5395HP @ 7300RPM when it redline @ 10,000RPM and this car Redlines @ 11,000RPM so again go play somewhere!

[@imstillherewatching5790]

100% agree , can fudge the numbers to show more .

[@cjgordon22]

Turbos look kinda small to be making those numbers

[@precisionpower2459]

106mm x 2

[@Kaletreii]

You must not know anything about turbos or engines!….

[@cjgordon22]

@@Kaletreii I know lots. it hard to tell from the video it's far away from the car.

[@Kaletreii]

But instead of saying the turbos look kinda small to be making that much power why not just ask what size is the Engine and Turbos?? Which for the record it’s a 670ci SuperBlock Hemi with 2 106mm turbos!!….if you know Mike Moran then you can see that he even has a 570ci with 2 102mm turbos that’s make 5295HP @ only 7300RPM and this is a 670ci so you know it’s gonna come with some serious numbers!!!!

[@Thewaldo12345]

100psi?

[@Kaletreii]

@ Dustin Walden I think that was @ 15-20 psi but this thing is a monstrosity!

[@simonklippert1623]

@@Kaletreii its at least 75psi

[@Kaletreii]

I’ll check but I think he said the boost was @ 20psi that thing make some crazy power

[@Thewaldo12345]

@@Kaletreii how is it making 2K more power at a third the boost?

[@Kaletreii]

I’ll ask what the boost was and you could be right I’ll inquire

[@donperryautomotive]

Next time do not stand before engine or anywhere conrods can fly!

[@Kaletreii]

Thank you

[@imstillherewatching5790]

cool story bro