6.7 POWERSTROKE LEAKING OIL PAN REPAIR

powerstrokehel...
Archoil: archoil.powers...
6.7 POWERSTROKE LEAKING OIL PAN REPAIR

[@sterlingyoung88]

You make me so proud to have a 7.🌳 and also being from the south.

[@RiggyRonnie]

I daily a 7.3 too. Black tuned 01 6in lifted crew cab 4x4 lariat auto. Slow as hell.

[@chrissargent9212]

Something we have been seeing on newer model with oil leaks, excessive crankcase pressure. Mostly on high idle time trucks. To check this, fire it up reve it. Then pull the oil fill cap while running. Engineering has said any noticeable pressure, you need to replace the crankcase breather box.

[@DanaLeeGibson]

Got two Archoil kits, one for my 1995 School bus, and one for my 1999 Van. Both run the 7.3 and both have over 200k miles, the van has 376k. Thanks Bill for your advice and sharing your expertise!

[@ChestopherClock]

Who ever makes marketing decision in the company is a genius. Keeping the retro (dgaf) video / audio quality makes this channel stand out.

[@timgeisbauer3084]

My 2014 F550 has had 2 upper oil pan leaks over first 25,000 miles...hope second time was the charm. All done under warranty. Good video.

[@daltonsmith304]

We do this repair alot at my dealership. Especially on the newer 17-19 model's. Have saw quite of few of them leaking at the secondary oil pan with little to no miles on them.

[@natehawkins2910]

Dalton Smith The robot that does the sealer squirting didn’t go heavy enough on the one corner where it all comes together. I heard that robot is now been put on desk duty.

[@andrewstratton806]

@Myballsitchsomethingfierce 2011s had plastic pans because the older trucks steel pans used to rust out so Ford tried to remedy that with a plastic pan but that ceeates its own problems.

[@danielmoreno695]

Thank you Bill, your videos have been so informative to me and understanding the value of these trucks, I now own a 01 F350 7.3 and 05 F250 6.0.

[@7ctransportcarpenter557]

1999 F350 7.3 with 427493 miles never had valve covers off!! No leaks no blow by!

[@Reyes6.0]

cuz those fukn things have no power

[@brianhouk543]

Maintenance is key, change oil every 3,000 and don’t overheat them and 7.3s run FOREVER. 380,000 on my 96 on original everything on motor.

[@bbubacz1]

Blah blah blah..my 7.3 blah blah blah.

[@freddiebates5539]

My 1989 f-350 7.3 has 480,000 on it does not use a drop of oil if changed every 3,000 miles, I changed glow plugs about 275,000 it is just now getting a little hard to start on cool mornings, my only grips are the wiring and transmission (3) so far I am wondering if I could put a later model trans in it ? Anybody ???

[@tomlorenzen4062]

@@Reyes6.0 all the power you need, great engine compared to that 6.0 money pit

[@ryanbrown918]

My Upper Pan was leaking on my '11 at

[@rar91181]

As a Ford tech I'd go ahead and reseal the front cover along with an upper oil pan reseal. Especially on the newer silicone gasket style upper oil pans. If the front cover leaks after just doing the upper oil pan reseal. Then you'll have to take the upper oil pan off again.

[@rightcoast7049]

Wow, judging by the thumbnail, Archoil even fixes a leaky oilpan!

[@Butcher35100]

A 6.7 is just like a 7.3 both have 18 head bolts on the head and leak oil after 200,000 miles 😂😂

[@ronsimms6530]

The only place I’ve experienced leaking oil on a 7.3 is the high pressure oil pump.

[@Thedoug369]

That would have been the 426 HEMI thank you very much! Lol. Love your channel Bill. Unfortunately my truck is a 08 6.4 which you won't touch, but they make power like no other Powerstrokes. 12.20 1/4 mile. Crew cab, long bed. Exhaust, intake, stock fuel. Teeny bit of tuning too Lol. As soon as I can afford one of your trucks, I'll be in touch! ✌

[@nativeoutdoors1780]

Take care of it and it will last

[@jeffreyhebda6709]

I own two work trucks with 7.3 motors, low miles still. We just start and go ! Very dependable just do normal maintenance !

[@holywobbles8703]

The '11 F250+'s are real nice with the upper oil pan as it just uses a replaceable gasket+Rtv. Unfortunately later models do away with that and utilizes a bead of Rtv all around the perimeter of the Upper oil pan. Also, you should have went ahead and replaced the gasket on the front cover since you were basically already there, I get a lot of early and late model 6.7s that leak from the front cover.

[@chefmatthammerschmidt8408]

Bill, my little area is dense with Powerstroke emergency vehicles. Only AMR does a diaper load of idling. The rest of the Emergency Response Vehicles typically only idle during calls, although outside the city limits, with the exception of AMR, They have a high idleswitch that brings them up to the neighborhood of 1-1.4k rpm.

[@sumbird97]

Not to mention the vacuum pump seals on the front of the engine that leak too. I think the forget to tighten the bolts that hold the pump on. most of the bolts are finger tight.

[@holywobbles8703]

This is due to the bolts backing out over time from engine vibrations, I always use locktite when re-installing the vacuum pump.

[@Nicky_Pin_It]

Mikey is the man, I'd buy that man a beer

[@tylerbruno2251]

Being a ford tech that job for just the upper oil pan is about 10 hours warranty. Now if the front cover is leaking you can get 14-15 hours. It’s a lot of work for little pay.

[@daye3371]

Tyler Bruno is the vacuum pump covered under warranty? I have a 15 with 110000 Km power train is 160000

[@GEDixon-ni5gk]

I recently took my 2004 Ford 350 6.0 (190.,000 miles) to check out a consistent missing after the engine warmed up. This diesel shop is the top rated shop in out town. They found by their diagnostic testing that 4 of the 8 injectors were fouling up after it warmed up. Two on either side. We replaced all injectors with Ford factory injectors and it ran like a champ. After 4 weeks,. It started to miss again. The shop got right on it and found problems with 2 injectors. Ford furnished 2 new injectors and paid for the labor for installation. It's running like a champ again. My question is , How often do you find Ford factory injectors are bad? I enjoy your site. Thanks

[@powerstrokehelp]

it is not often. Maybe 1-2% failure rate.

[@buzzballz4uz98]

Hi bill. I Totally love your channel and have been passing it along to customers at my place of work in CA.

[@4040pmora]

The vacuum pump will leak on these too and make you think it's an oil pan gasket or main cover.

[@markparker4032]

They sure will.....Mine was loose and leaking bad.

[@RiggyRonnie]

That's a lot of miles. Congrats!

[@andyhall6112]

How much do you charge for that job on my 2011 it just started seeping at 270,000

[@ILC-eo6vk]

My 14 6.7 only has 79k miles and it has a small leak in the front. Many say it's from lose vacuum pump bolts.

[@wesleysnipes9395]

I’ve done like 10 of these on ambulances with 60k miles

[@michaelszpak2247]

It was a Ford cross bolt 427 not a 427 hemi. The hemi was never called a 427 but was called a 426 hemi. I love the videos. I have a 2004 6.0l F250 4x4.

[@vasiliydron]

I'm sorry

[@paulherring8208]

In the south u guys hate oil leaks up north we love them

[@nicholaslilly4775]

Self oiling frame no rust, gotta love it

[@bmxguy08]

I would love to see a video on any other common issues/theme's you are seeing with the 6.7 now. my 14' only has 69k miles but I would love to fix anything before it becomes a problem.

[@whiskeytangofoxtrot9403]

My '14 has 200k miles as of last week and I have to do my upper oil pan next week. Check out Powerstroke Tech Talk with Arod on YT he works for a Ford dealer and has lots of good info on these trucks as well.

[@dustinsutton7937]

Should reseal the rear engine cover if your that deep. Only an extra 30 mins to do so and a 20 dollar gasket

[@HaydenIngram]

how many mishimoto radiators have you put in that 6.7? no one around here uses them anymore as they last about a year. the plastic ones last in my experience as the mishimoto's dont. i know they are lifetime warranty but who wants to replace for a lifetime....

[@thesteelstud3610]

My automotive teacher in highschool said when he was a tech he could install a 4l80 chevy trans by hand, he was a big man but i don't even think he could handle a 6r140.

[@natehawkins2910]

Has Mike EVER said “no” to any question?

[@jimmyaber5920]

Did the prep clothes get used to clean surfaces before RTV was applied? A ford tech friend says that SSM from Ford added that to the repair instructions and it took care of repeat upper oil pan leaks.

[@whiskeytangofoxtrot9403]

'11-'12 have a gasket pan '13 and later have silicone and require the wipes.

[@Cruising200]

I’ve heard a few people being able to remove the oil pan without removing the transmission by jacking up the engine.

[@BarnStangz]

Pretty please get a new camera! Thanks for sharing fellas. Thinking about pulling the trigger on a 6.7 next year. Old boi 7.3 is starting to show his age...

[@AgiDaKinG]

For a second I thought this was shoenice and he was going to chug that bottle of fuel treatment

[@gmlover82]

Once again an awesome video!

[@zeus6.717]

Hey bill I got a 2013 6.7 with 170,000 and it’s got a “muffler delete” and all the goodies. I was wonder if the idle still affects the engines life the same since it’s not breathing all that soot?

[@alexmckenzie4648]

Hello bill is spot still working... make one of her running plz..

[@thulsadoom1359]

I second that motion👍

[@nickjonesrc]

Hmmm guess I missed the dpf 🤣

[@adamsooker3667]

Still got my 7.3 with 2,452,877 miles on it.

[@bbubacz1]

adam sooker My 7.3 has 18,675,983 miles. original injectors and o rings.

[@Albert-bk1jz]

How do you guys put so many miles? You guys are on the rd for a living? Thumbs up for your trucks!

[@reesebobby99]

Give Mikey a raise!

[@SmokerBBQ]

Ok, I have to ask. What is the silicone/sealant Motorcraft that y'all love so much? Got a PN? 👍

[@jamesvokral8247]

Ford grey. It's like super glue in the rtv world lol. It's amazing stuff.

[@BC08]

@@jamesvokral8247 There's different Ford grey RTVs. Motorcraft TA-31 is the 7.3 oil pan gasket RTV he mentioned in the video.

[@RZMotorsports]

Hello Bill thank you for your service to the power stroke community. I heard you in the video mentioned that you wouldn’t recommend running 25k on Amsoil. I run both amsoil signature synthetic and Archoil on my 7.3 with bypass filter. What would be a good interval on 7.3 that you would recommend. Thank you in advance!!!

[@mattmatt4618]

DAMN! I got my kit before this offer was made...

[@saleendriver]

Is it Mikey who is your son working there, or was that "G"?

[@amiliogonzalez6711]

That's G

[@Readmypost]

I had a leak for the oil pan since 20k miles

[@keithhurst8198]

Why does my 174,000 mile 2006 6.0 always have rough starts mainly in cold weather, it always runs smooth once oil temperature reaches 125 degrees. I faithfully use archoil ar6200 in the fuel and ar9100 in the engine oil and it gets changed every 5000 miles with a high quality full synthetic oil. Any remedies short of new injectors?

[@lightningsmokerXx]

6:20 - I did not take Mike/Mikey for a smoker. Blood Circulation is what smoking really destroys that they don't warn you about.

[@daye3371]

On my 15 the vacuum pump started leaking (ford wants to replace pump) but why if it just needs to be resealed.$600 total

[@jamespeters3907]

Would you not recommend replacing rear cover gasket? Since you are there.

[@jimbobxcityguy5338]

Will the leak comeback due to the lack of a real gasket?

[@NytefogNJ]

What is type of oil bypass system does this truck have? I see a amsoil filter, but it doesn't look like the Amsoil bypass kit. I.see what looks like a oil filter sandwich. Also, Where to you run the return line from the bypass to?

[@BamaOutdoor]

Just out of curiosity how much did the upper pan repair cost? I think mine is starting to seep

[@jaypincus]

Why not for the winter kit!?!? I just ordered it. Its winter!!

[@larryehrlich8702]

Did you compensate for the lost Archoil? I bought a gallon of Archoil for my two Honda's. You guy probably buy it in 55 gallon drums and save a bunch of $$.

[@sepresley1]

Bill I was looking at a 2015 with 6:7 with 80000 miles what are their problems that you would fix

[@13EN17]

annnnnd it's deleted LOL seems like the only way to keep these new diesels running

[@3cylpower]

I heard that exhaust note when Mikey drove it on the hoist...funny!!

[@Cruising200]

You can tell since the oil is so clean lol. My oil stays clean for about 5-6k miles

[@zxtenn]

Did you end up moving or have to move? I just saw a video where you were selling about 70+ blocks a while ago

[@Purdypickle92]

Ole Mike hit tf outta that vape 😅

[@I5ZQ8]

I just did my first oil change on my 19 6.7 and used a motorcraft filter. It leaks a little bit and has spotted the bottom of the truck. Its super snug i even gave it almost half a turn with the wrench after hand tight. Any suggestions??

[@andrewstratton806]

Did you make sure the gasket came off with the old filter?

[@willdavis5105]

Is the “banana” still in the tailpipe of this truck?

[@jeffwilson1399]

"You're not gonna fall for the banana in the tailpipe?" kzbin.info/www/bejne/gWikgYNor5asp7c

[@andrewstratton806]

Nope way to loud to have the emissions stuff on it

[@salmonaco007]

So to do a crank sensor you have to remove tranny what's Ford thinking

[@BamaOutdoor]

How much did the upper pan repair cost?

[@freddiebates5539]

Do you ever make any videos on 7.3's '89 and so on.?

[@brendasmith5937]

Does anyone know if the GEM module on a 2002 Excursion 4x4 has to be done by a dealer??

[@jamesdixon4601]

What's the best way to know if my transmission has power take off or not?

[@mr.potatohead5670]

Whats a repair like this cost?

[@mikeholubek4419]

426 Hemi 427 was Kick Ass Chevrolet Big Block

[@raider762]

Why not a new oil cooler?

[@pointblank8210]

Odessa tx 👌

[@biff1tannen]

🥰Toyota Hilux🥰

[@powerstrokehelp]

hook a 10,000 pound trailer to that hi lux and when it shits its transmission THEN see how much you like it.

[@biff1tannen]

@@powerstrokehelp 🤣🤣🤣🤣 Thats true man... My Toyota Hilux cant handle a real mans job. Im happy I have my 00 Excursion 7.3 🏋️‍♂️to do that stuff Bill😅👍. Thanks for a good Powerstroke channel. Whatch you from Norway🇧🇻

[@biff1tannen]

@@mikebagwell8229 🤣🤣 I also have a 1980 Corolla with a Mickey mouse engine. Towing nothing🤭

[@whiskeytangofoxtrot9403]

I pulled 13k for a year on my 6.7 and it loved every minute of it no hilux will do it.

[@Docstantinople]

You got a leaking truck? Repair it with Archoil

[@phillsogood]

How much did you charge to do this?

[@andrewstratton806]

It's his truck

[@ericalbertson6621]

Is it my phone or is the audio horrible?

[@brandonkisner4069]

Just had mine done on my 19 with 40k on it

[@natehawkins2910]

Brandon Kisner Did Your “upper” oil pan leak? I have a 19 6.7 too and watch mine like a hawk lol Its dry so far. I have a bit over 30k on mine. Did yours just get wet looking or actually drip?

[@RiggyRonnie]

Damn brand new already leaking oil

[@daye3371]

What’s joes channel called ?

[@DanielMartinez-hj4ob]

1:28-1:31 big smoke on vape lol

[@thomasbarlow4223]

Sup Bill

[@brianhouk543]

So much for the new oil cooler I guess huh?!!!!

[@lustfulvengance]

Wouldn't it be easier and better to just pull the engine and re-seal it on a stand then removing the trans and fighting with the crossmember and getting oil dripping on you???????

[@RiggyRonnie]

Lol with all that wiring and hoses heck na. More than twice the work and money.

[@whiskeytangofoxtrot9403]

To pull the engine you have to remove the entire front clip or the cab.

[@johnmclean9249]

426 hemi

[@NCSUME1]

anyone have coolant leak on 2016 6.7?

[@whiskeytangofoxtrot9403]

Had an o ring leak at the hose/thermostat housing on my '14

[@johnw391]

Bills place is where I would take my truck if it was a powerstroke

[@fernandogutierrez6236]

Whos lisenting to that mexican song i hate at 6:24

[@jeffanderson7256]

Why is the factory oil pan plastic? talk about planned obsolescence 🤦🏻‍♂️

[@natehawkins2910]

Jeff Anderson I think duramax went plastic this year for both oil and for trans pan. I think the 2020 Powerstroke tranny that is shared with the duramax also will have a plastic tranny pan. Duramax used such a thin grade of steel for their oil pans that they rust thru in like 6 years. Right after warranty. ;)

[@RiggyRonnie]

Meanwhile Cummins is still old fashion

[@whiskeytangofoxtrot9403]

They were only plastic on '11-'12 after that they are the steel they "upgraded" to.