6 TO 1 Mechanical Advantage for the winch out.

In this video, George and I were sent to recover a skid steer that was stuck in a pit,bucket all the way down and didn't run. We ended up using a 6 to 1 mechanical advantage to get the skid steer to level ground so they could work on it.Thanks for watching, don’t forget to LIKE, COMMENT, SUBSCRIBE, and SHARE this video!
 Email Me Here- [e-mail]
 Send Mail Here-
Hal Watts
324 Green Swamp Road
Sumter, SC 29150
Follow Us on Social Media
 Facebook - / sumterwreckerservice

[@johnanderson2451]

That is a heavy machine, hard pull when you don’t have any help from the disabled machine, learn something from your videos every time I watch them. Thanks for sharing

[@SumterWrecker]

Mr John Yes sir. Thanks for watching and stay safe

[@jerrypatterson6356]

Have a great and bless day 🙏🏻🙏🏻🤓

[@SumterWrecker]

Mr Jerry We appreciate you watching our channel and commenting. Stay safe

[@Mike44460]

This is right up my alley. I have a five part snatch block setup and can add up to a nine part. You can't believe what my little JD 1025R can drag up the hill out of the woods. The proper application of force is a beautiful thing. You Rock Sumter!

[@SumterWrecker]

Mr Mike We really appreciate that. Thanks for watching and stay safe

[@Feline_Frenzy53]

Great job Mr. Hal and George. Since I have absolutely no geometric skills at all, I found this video especially fascinating. Stay safe out there. guys.

[@SumterWrecker]

Feline Frenzy Thanks for watching and stay safe

[@WilcoxGarageRecovery]

Nice, thought out rigging that led to a successful recovery 👍🏻

[@SumterWrecker]

Wilcox Garage Thanks and thank you for watching. Stay safe

[@ProudPapaw88]

Nice winch out, Mr. Hal and George. I had never seen one like that. Thanks for sharing and have a great weekend.

[@SumterWrecker]

Proud Papaw Thanks for watching and commenting. Stay safe

[@rogerstlaurent8704]

Dang that poor winch was screaming for dear life LOL... I was not really sure about the pulling force in tons. I was shocked that the cable did not break ... Outstanding Video Mr Hal and Mr George have a great weekend looking forward to your next video

[@SumterWrecker]

Mr Roger That is an 15000lds electric winch. Thanks for watching and stay safe

[@fishpolice150]

Great job Mr Hal 😊great use of mechanical advantage

[@SumterWrecker]

Fishpolice Thanks and thank you for watching. Stay safe

[@oddtechman]

The little skid steer that could (plus a lot of mathematic formula in the head for line pull loading!) Nice challenging and refreshing recovery to work the grey matter! thanks for sharing

[@SumterWrecker]

OddTechMan We appreciate that. Thanks for watching and stay safe

[@HODGEPODGEDODGEGARAGE]

Looked like one bear of a winch-out! 🔧 Nice work fellas

[@SumterWrecker]

Mr Zane Yes sir it was. Thanks for watching and stay safe

[@edwinschlee8374]

That one took some math skills to hook up all those snatch blocks. Good job Mr. Hal and George.

[@SumterWrecker]

Mr Edwin thanks for watching and stay safe

[@knightsplumbingrepair5203]

I like that winch attachment for that skid loader

[@SumterWrecker]

Knights plumbing Thanks and thank you for watching. Stay safe

[@knightsplumbingrepair5203]

@@SumterWrecker no problem and y'all stay safe as well!

[@ashleigh6219]

Man order you a winch box for your skid steer. they are amazing. We have 5 of them and it will take that machine to a new level.

[@SumterWrecker]

Mr Ashleigh I really need one. Thanks for watching and stay safe

[@stuartpulvermacher6861]

Nice job as always Mr Hal. You need to build a rack on the roof of the skid steer to carry your rigging . I think with your knowledge you could build one pretty easy . I think it would save you some time and would be easy to tote your stuff around. Thanks for sharing

[@SumterWrecker]

Mr Stuart Yes sir Thanks for watching and stay safe

[@2wwwilly]

Good job men 😂😂❤

[@SumterWrecker]

Mr Wiley Thanks for watching and stay safe

[@mixerman1]

Lessons in practical physics and geometry. If you could have got some lift it sure would have helped. Thanks for the video and stay safe ya'll

[@SumterWrecker]

Mixerman Absolutely. Thanks for watching and stay safe

[@jayh1947]

The thinking mans winch out.................Jay

[@SumterWrecker]

Mr Jay Thanks for watching and stay safe

[@armandoperez6673]

Awesome job,mr Hal💪🏼💪🏼💪🏼 using mechanical advantages. I have Just a question, are all the snatch blocks you've used are all 4tons capacity? Thank you.for the nice video take care all of.you.

[@SumterWrecker]

Mr Armando Yes sir all were four ton blocks. Thanks for watching and stay safe

[@armandoperez6673]

​​@@SumterWreckerThank you for the info Mr Hal. Have a nice day and Take care always. By the way i've noticed that you've been breathing heavy at the video (sometimes coughing) keep safe and watch your health. Again thank you for the info

[@JR-vg3gg]

Mr Hal .. I wish you could get employees that work Like Mr Wilber..

[@SumterWrecker]

Mr Jr Thanks for watching and stay safe

[@adriaanboute4896]

I notest that the bukket of de machine was down and dragging. Mostly you can turn the cey in the on position and then by moving the controles the bukket and arm wil flow back in a sliding position.

[@SumterWrecker]

Mr Adriaan Thanks for the tip. I will remember that. Thanks for watching and stay safe

[@nwpioneer2551]

Big pick up and put away job.

[@SumterWrecker]

Nw Pioneer thanks for watching and stay safe

[@hingstonia]

Is there a way to come up with a tripod type/pivot device to get some lift to get the corner of the machine out of the dirt?

[@SumterWrecker]

Hingstonia I have seen tires used to pull tree stumps just not sure if that would support the amount of force applied. Thanks for watching and stay safe

[@doak4886]

Mr. Hal you must have been a Physics teacher.

[@SumterWrecker]

Mr Doak That was probably the hardest pull i have used the machine. Thanks for watching and stay safe

[@TheBlueBikeDoyle]

That one was hard pull

[@SumterWrecker]

The Blue Bike Doyle. Thanks for watching and stay safe

[@DependableAutoTruck]

I think you needed the old 750 hooked to a tree and showed it who was boss

[@SumterWrecker]

Dependable auto If the job had been closer I would have. Thanks for watching and commenting. Stay safe

[@DependableAutoTruck]

what size winch is that you are using

[@SumterWrecker]

Dependable auto 15000 electric winch. Stay safe

[@nwpioneer2551]

A little math goes a long way.

[@SumterWrecker]

Nw Pioneer thanks for watching and commenting. Stay safe

[@petermccuskey1832]

Amazing uphill battle but, you persevered by using brain power to use a great potential of what was on hand. Stay safe!

[@SumterWrecker]

Mr Peter It was a battle. Thanks for watching and stay safe

[@nwpioneer2551]

Your rotator with some lift and more power would have helped

[@SumterWrecker]

Nw Pioneer I think i could have maneuvered our 10 ton wrecker in here. That would have been alot easier. Thanks for watching and stay safe

[@dave_n8pu]

Just listening to your wench, even at a 6 to 1, it sounded like it was giving you all it had and then some. I take it there isn't enough room for a bigger wench with more capacity.

[@SumterWrecker]

Mr Dave We were told nothing could close to it. That is the reason we used our Skid steer. Thanks for watching and stay safe

[@dreggallo6774]

is it me,,, or does it look like someone couldve just cleared away the dirt from behind the bobcat,,,,,,and then just drove it out of there...... 🤔

[@SumterWrecker]

Dreggallo The machine would not run. The mechanic wouldn't work on it over the pit and off the ground. Thanks for watching and stay safe

[@LindaPhillips-t3h]

I have heard your not supposed to put a chain around a tree with a snatch block. You need a strap like the yellow ones even if you have to double it the chain can cut the tree bark

[@SumterWrecker]

Ms Linda Correct or if use a chain put 4 4x4 blocks standing up around the tree. The chain pulls against the 4 x4. Thanks for watching and stay safe