6 x 10 cargo trailer build out for snowmobile transport and sleeping quarters/drying room.

We built out our Rainbow 6x10 cargo trailer to be able to sleep two people, act as a drying room and still transport a sled when needed. We will tow this behind our 2020 Northern Life 8-11.

[@DD-mg9rf]

Thank you for sharing your build ,I'm planning to do the same thing in a 6x12 but I'll add some holes for ice fishing 😅

[@Normantattoos]

Simple and clean, such a good build. Can I pet that dog lol

[@SPCLPONY]

Wow, that's a great build! I like the ladder storage, and how the beds fold up to the wall. The only thing I'd add if it were my trailer, would be a one piece linoleum floor to protect the plywood from melting snow when a sled is parked inside. Of course, the carpeting would be rolled out for camper mode. Thanks for sharing!

[@torreyance2468]

Nice set up. simple and clean. love it.

[@grantlingley1385]

I am about to buy a 5x10 so pretty impressed to see what you have done. For me more dirt bikes and weekends trips! Thanks for posting!

[@irenegriego2446]

I like how simple it is

[@sethalos]

I'm looking to do this to my new trailer as well, more of a spring project, but thanks for the video...I have so many ideas now.

[@BoxcarsGarage]

Such a sweet rig. Just got my 5x10 v nose today. And I'm planning my rig. First I need two slider windows.

[@davidpoffenbarger3686]

Well done. Clean and simple.

[@greatwhiteshredhunter]

Thank you

[@Dave-sw2dm]

Looking at the location of your house, I don't know why you would ever leave! :-) Nice build.

[@susancross4679]

Perfect simple and Clean

[@applesbighatranch6906]

Outstanding conversion! One thing, though, and that is your trailer sure looks like a 6' X 10' from where I'm sitting. Unless you're 4' 10" tall, that is. Heehaw. Great job! Thanks for your video.

[@jameshussey4900]

It's 5 wide by 10 foot long 🙄

[@joeykahng6219]

Great build out. ❤️🤙🏼

[@deathmine474]

Nice build, could you make a video on how to bunks are made and how that hinge system works. Thanks

[@emoryjack]

Amazing work!

[@thunder19301]

Very Nice Great Job👍

[@bigred6220]

Man! That’s AWESOME!!🙌🏻

[@chaddaustin6539]

I have a 5x10 and a 7.5x16 trailer I am working on. My 5x10 has three ice fishing ports in it and was inspired by Joe Tremblay (youtube videos). Both of my trailers are in the very beginning stages of conversion as I am not really sure what exactly it is I am trying to accomplish with them both. I do know (much like yours) that I want to be able to haul a quad or motorcycle in the 5x10 and sleep two. Much like you have a cut-out for the snowmobile ski, I will have (in the forward center) room for the front tire mount of a motorcycle. I bought the 7.5x16 to make into a camper and thought I would sell the 5x10 although still find myself mostly using the 5x10 trailer (perfect size for so many things). I put my Articat 300 quad in the back of it and tow the trailer out to the boat launch. I pull out the quad and hook the trailer to the quad and pull the trailer out onto the ice and fish out of it. I have wired AC plugs in it and use a Buetti EB150 to power everything. My grandson loves it and brings his tablet out (I know but it keeps him interested in coming along). I put a third ice port in for him a little while ago so that he will have his own port to fish out of this year. He and his dad and I all go out and is great fun. I am installing another 6inch port for a fish finder soon. I had a diesel heater in it although removed it thinking I was going to sell it but now realize I am keeping it. I installed the diesel heater in our (rustic) log cabin (up North Michigan on 40 acres of land) and so will buy another diesel heater (bigger one for the cabin) and put the original one that is currently in the cabin back in my trailer. I was told that smaller diesel heaters run better because they run in "full" mode more often and don't carbon up by running in low power mode so often and so bought a 2000KW 12VDC. Even that is a bit much for my little 5x10 trailer and especially now that it is insulated. I plan to add a window or two and a roof vent soon. Even without insulation and a buddy heater (yes...carbon monoxide detector as well) it gets so warm that we hang up our coats and fish in t-shirt/jeans even though it is single digits outside and wind blowing. I wil get a bigger diesel heater (probably a 7500KW) for the 20x24 log cabin. The cabin has a wood burner for heat although it is nice to have the diesel heater to run all night, and also to warm up the place when you first arrive until we get the wood stove fired up. I fully insulated my (brand new all aluminum) 7.5x16 trailer and had enough material left over and so am using it to insulate the little trailer (enough pieces taped together to make whole sections). I LOVE what you did with this trailer (especially the beds). I have two questions (if you don't mind)? 1) How did you mount the bed hinges to the wall? 2) Where did you get that metal diesel tank from? Thanks for the video...along with Joe Tremblay...you give me great inspiration on things to do to mine. Chadd

[@greatwhiteshredhunter]

Hello Chad. As you know, the trailer has a metal frame. I screwed 1 1/4 x 1 1/2" wood framing to the metal and then fixed blocking at the level of the hinges for the beds. This way the hinges are attached to the blocking which is attached to the wooden frame which is attached to the metal frame. I went 1/4 thicker than the metal frame to lessen thermal bridging and reduce condensation in cold temps. I bought the metal fuel container on Amazon. Should be easy to find.

[@swanl3134]

Dep

[@wicked.505]

Got a blue print on your lay out. That is a nice simple set up. I have a 6x10 and started working on it. See if I could replicate like yours...

[@thestujames]

Great Build! and a layout I am considering for my build, however one thing that confused me is that the interior looks wider that 5'.. if the bunks are 30" they should come to the center line of the trailer. Maybe its the angles of the camera or my eyes are not working properly, but it looks like you have a 6x10 cargo trailer.

[@greatwhiteshredhunter]

You are correct. My mistake. It is in fact a 6x10. Good eye.

[@mertonallowicious]

I have a 6x10 v nose I’m looking to convert and was going to ask the same question! That’s a wide 5 foot😅

[@josephgeorgeejr7039]

Put some grab handles for getting in out top bunk, love the build though, very similar to what I mean to do with mine

[@greatwhiteshredhunter]

Great idea!

[@johnhumphries4632]

Nice 👍

[@kenleach1198]

Lovely to see❤

[@user-id7sz9bm1j]

This is stunning and genius! Thank you for sharing. What did you use to attach the 1/4 ply to the firring strips? It looks so smooth and thicker than 1/4 the way that you have it installed it. I love the simple beauty of the plywood. Thanks again.

[@jj-eo7bj]

Need a kitchen in there too

[@mcintyre747]

Where's the snowmobile? Have you put it in there yet and had the snow melt off inside?

[@vonmuller6577]

Snowcat trailer! You must be from California!

[@JaneJones1]

Nice work! Also my dog looks a lot like yours but surprisingly his DNA test showed no lab at all 🤷🏻‍♀️

[@JaneJones1]

So anyway I think you’ve got a great looking dog 😂

[@dakotaracebrown]

How did you build the bunk beds?

[@Timbodacious]

We need an update 😂

[@richardvalitalo3670]

Nice but most sleds are longer than that interior space.

[@chaddaustin6539]

Oh...third question...what are the dimensions of the beds? :) Thanks, Chadd

[@greatwhiteshredhunter]

The dimension of the beds are 30" wide and 6'2" long. The width was dictated by the height of the trailer.

[@BillSias-op7xw]

can't hear you!

[@Fukinuup2]

Big deal.