6" X 18" HARIG "AUTOSTEP" (MADE IN THE USA) SURFACE GRINDER WITH AUTOMATIC INCREMENTAL DOWNFEED

Рет қаралды 16

Күн бұрын

www.machineryv...
6" X 18" HARIG "AUTOSTEP" (MADE IN THE USA)
SURFACE GRINDER WITH AUTOMATIC INCREMENTAL DOWNFEED
S/N: 9084-H NEW: 1997
WIDTH& LENGTH GROUND ................. 6" X 18"
VERTICAL WORKING HEIGHT w/7" WHEEL ..... 12"
LONGITUDINAL TABLE TRAVEL .............. 18-3/4"
LONGITUDINAL TABLE SPEEDS .............. 0 TO 70' FPM
AUTO CROSS FEED PER TABLE PASS ......... 0 TO 3/32"
DOWNFEED OF GRINDING WHEEL RATE ........ 0.9"/MIN.
RAPID UP/DOWN TRAVERSE ................. 2-1/2"/MIN.
AUTO DOWNFEED INCREMENT PER PASS ....... 0.0001" TO .0099"
GRINDING WHEEL ......................... 7" x 1/2" x 1-1/4"
MAXIMUM GRINDING WHEEL DIAMETER ........ 8"
FLOOR AREA OPERATING SPACE ............. 71" x 45"
APPROXIMATE WEIGHT ..................... 1,500 LBS
MACHINE FEATURES:
HARIG "AUTOSTEP III" AUTOMATIC INCREMENTAL DOWNFEED
CONTROL FEATURING:
-5 DIGIT THUMBWHEELS TO PRESET TOTAL DEPTH
-2 DIGIT THUMBWHEELS FOR SETTING DOWNFEED
INCREMENT FOR FEEDING @ BOTH LEFT & RIGHT, OR
LEFT ONLY OR RIGHT ONLY
-THUMBWHEEL TO PRESET 1 TO 9 AUTO SPARKOUT PASSES
-AUTOMATIC CYCLE INCLUDING RAPID RETURN STARTING
POSITION
-JOG BUTTON FOR REPOSITIONING 0.0001" PER JOG
-RAPID TRAVERSE BUTTON
-DIGITAL READOUT DISPLAY
-"AUTOSTEP III" FEEDS IN BOTH PLUNGE OR SURFACE
GRINDING MODES
HYDRAULIC TABLE TRAVERSE
ELECTRO-MECHANICAL CROSS FEED (DIAL CONTROLLED)
1.5 HP 3/60/208-230-460 VOLT HARIG SUPER-PRECISION DIRECT
DRIVE CARTRIDGE TYPE SPINDLE

EQUIPPED WITH:
6" X 18" WALKER "LBP" FINE-DIVISION ELECTRO-MAGNETIC CHUCK
O.S. WALKER "SMART SERIES" VARI-HOLD NEUTOFIER
COOLANT SYSTEM, SMALL TANK & PUMP,
TUCKS IN THE BASE OF THE MACHINE ON THE RIGHT SIDE
OVER-THE-WHEE DRESSER
MACHINE IS PRESENTLY WIRED FOR 3/60/460 VOLTS, CAN BE SWITCHED
TO 208 OR 230 VOLTS FOR $500 FEE.

LINK TO VIDEO: • Video
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** ORIGINAL PAINT - EXCEPTIONAL CONDITION & APPEARANCE