64 Chevy impala, making more patch panels for front fenders

Making more patch panels for front fenders doors, and doing bodywork to them

[@PBAB17]

There's a certain level of satisfaction and therapy if you will in doing your own repairs and body fabrication. I'm doing fender lip repair and rocket panels.

[@troylukans2174]

Yes there is

[@johnweaver8470]

Nice work keep the videos coming

[@IRESTOREBUILDSTUFF-ne9xv]

Thank you

[@ezelk1337]

Great job Troy! I will be working on my 66 Chevelle soon. With all of the metal shaping that you are doing you may want to get a cheap anvil. I do some knife making and the Vevor anvils are nice for the money. Subscribed.

[@IRESTOREBUILDSTUFF-ne9xv]

That’s a good idea thank you

[@robertlacob8831]

Excellent job Troy! This will be one fine automobile when finished!

[@IRESTOREBUILDSTUFF-ne9xv]

Thank you very much

[@GenesCustoms.]

Nice Job.

[@IRESTOREBUILDSTUFF-ne9xv]

Thank you

[@countrysmurfcomedy3099]

Great tips 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾

[@troylukans2174]

Thank you

[@claudemarois4846]

Job professionally done !

[@IRESTOREBUILDSTUFF-ne9xv]

Thank you

[@davidbrown-55]

Good stuff. You make it look easy. What’s a good non expensive epoxy primer that would stick to ppg dp epoxy primer when scuffed? After that I’m Raptor lining over it . Thanks, love your vids

[@IRESTOREBUILDSTUFF-ne9xv]

Thank you very much and summit racing. Sells an epoxy primer. That works really good. And it’s priced well.

[@octane2099]

I would help you for free just to learn you doo nice work.

[@IRESTOREBUILDSTUFF-ne9xv]

Thank you

[@ezelk1337]

Hi Troy. What brand of filler do you use? It seems to spread out really nice. Thanks Eric

[@IRESTOREBUILDSTUFF-ne9xv]

www.autozone.com/paint-and-body/body-filler/p/premium-body-filler-1-quart/1100920_0_0?cmpid=SPL:US:EN:AD:NL:1000000:GEN:pdp&CATARGETID=120054150001288815&CADevice=m&gclid=EAIaIQobChMIt5fmt8fmgQMVN_3jBx1K0wzbEAQYEiABEgJIA_D_BwE&gclsrc=aw.ds

[@jraposo911]

I like your work! His many years you been doing it?

[@IRESTOREBUILDSTUFF-ne9xv]

I started messing with car when I was 14 I am 47 now thank you

[@jraposo911]

Oh yeah . I can tell you know your $hIT. I went the other side ,started mechanics at 18, I’m 57 now . I want to redo the body on my 71 Lemans myself. KZbin university it is !!! 😊😊JR in 🇨🇦

[@IRESTOREBUILDSTUFF-ne9xv]

@@jraposo911 you can do it if you need any help I’ll try and talk you through it

[@thekingmtmt3873]

Hi I have a question. When you DA the fender or the car in general, how do you know when to stop? Meaning do you go to metal? I have a bunch of well looks like surface rust

[@IRESTOREBUILDSTUFF-ne9xv]

If you have a bunch of surface rust, yes, go down to bare metal and use an epoxy primer and then do your body work on top you might have red oxide primer which will look like rust and if you look in my videos, you’ll see that on the fenders and doors. It’s actually a reddish brown primer but if you do have a bunch of rust try to get all of it off the metal that you can and you can use a Rush converter but you Gotta make sure you follow the directions and then I always put a Epoxy primer on the bare metal before I start bodywork unless you’re just doing small spots

[@thekingmtmt3873]

@IRESTOREBUILDSTUFF-ne9xv ok thank you reference point. Should I have to worry about warping at this stage?

[@IRESTOREBUILDSTUFF-ne9xv]

@@thekingmtmt3873 just don’t go real high speed. Probably use an 80 grit you should be just fine.

[@thekingmtmt3873]

@@IRESTOREBUILDSTUFF-ne9xv ok thank you

[@IRESTOREBUILDSTUFF-ne9xv]

@@thekingmtmt3873 you’re welcome. Let me know if you have any other questions.

[@keithbrooks5575]

what gauge metal are u using

[@IRESTOREBUILDSTUFF-ne9xv]

16 gauge is what I’m using