66chevhell walk around

Walk around my 66 Chevelle

[@lamm442]

Thanks for sharing all the little secrets, most people don't share the actual problems u run into when u r working on ur car, good show best of luck.

[@tdalb8985]

Lucky you're car is Rad! I'm a Chevelle guy anyway, and would like to see it painted, and trimmed out a bit, but it's freakin cool. I admire your skills Sir.

[@apachelives]

THANKYOU FOR STAYING ON KZbin

[@joejermolowicz6378]

absolutely amazing never thought you had that much stuff done to that car kind of funny that you don't touch the pain but you touched everything else

[@MrAndyOwen11]

This Chevelle is the coolest. Thanks for the walk around, Lucky!

[@2kanchoo]

Just wanted to say again I love these videos, and appreciate very much the fact that you continue to make them.

[@TheCanadianBubba]

An evolution... so much labour of love in this car, you can tell just by looking ! Thank you for sharing !

[@s10issues84]

Before seeing this I thought this was really one of the coolest cars on the road. I cant say how much I like everything about this car, even everything that isn't perfect just gives it a meaner look.

[@dylandivilbiss]

So in love with this car.

[@Tigersmundo]

*Excellent template for all Chevelles!!!*

[@jw4620]

Nice work, and all the best parts!

[@TheMainphrame]

Love long updates! Wish the best for you and your fam. :)

[@radioactiveload]

my favourite car of all time. its perfect. not perfect enough to baby and solid enough to beat on without worry

[@king0cans]

Beautiful car Lucky. Looking very sano.

[@BustedClassicGarage]

Very nice Lucky, that Chevelle is clean.

[@RDSAlphard]

This is one of my favourite Chevelle out there, because it is made to corner, and also have a lot of good use of parts, like the cup holder, the $300 Hyundai seat, and the cheap LS power...

[@heathersanborn4914]

DAMN! I really like the extra layer of chip guard on the lower rear quarters ;)

[@andrewmurray6772]

thanks Lucky, all looking pretty sweet under there ! Cheers from Australia :)

[@chazer200]

NOT a car show Queen, BUT a performance GODDESS!!!

[@mauriceharvey2840]

nice walk around ..seeing your show is still free , I'm watching you on youtube red...cheers

[@kwgrinnell]

First, Lucky impresses me with his builds.

[@GarryFullerSr]

Looking Good.

[@nicholasvonrhine541]

You are the man lucky.

[@keithfilkins2043]

Thanks Lucky,awesome car,love it

[@johntotten4872]

Sweet Chevelle Lucky.

[@ctaveras84]

Nice! Love it!

[@Geoff240ti]

Love the build, I've got a LS3 for my 66SS and plan to replicate your driveline and suspension. I'd rather trailer it to you and have it done though!

[@jlletaw1954]

Nice craftsmanship

[@ianm432]

I like the way you party!

[@chikitabowow]

Damn that's an amazing hot rod, greetings from Sweden!

[@abefrohman1759]

Awesome ride Lucky.

[@gjrt7573]

Video on how to build a transmission?

[@jimspencer1077]

Love the video and the car

[@mattypisme]

I was waiting for you to do the hand gesture when you said dragon claw lol

[@VideosByAl]

Nice job 👍

[@rguzzo3510]

lucky for President

[@CHIPNDEATH]

that chevhell is a "master piece" of muscle Americana...

[@beezo2560]

Work of art.

[@mikepoint4983]

Sweet set up Lucky

[@chalinp4886]

Luky I think it would be cool if you paint the c10 to match the Chevelle wheels and all

[@AMERICANLEGENDModelBuilder]

Dragon claw, yeah, any story with any kind of Dragon is a good one.

[@ewvoss68]

Hey lucky. Ive always liked your master cylinder set up. You say they are hardlined to fittings on firewall. So from the firewall they are braided to the corners? Could you expand on this. Love the craftsmanship.

[@larryalexander4833]

Lucky you have built yourself a really nice ride. Takes time knowledge and money !! Im impressed ! I have a 85 s10 4x4 I'm tinkering with has the really small 2.8 v6 .wish I could get a 4.3 to fit but being 4x4 Im not sure thier is a bell housing or trans to fit the factory trans or replace to trans case ? Or just leave alone just like little more hours.

[@loraway1]

Love the Chevelle next do walk around the c10

[@zoninable]

Hi Lucky i have always wondered what is that paint? I like the look of it.

[@PCcopeland]

I appreciate you making this video. Do you remember what the back spacing and wheel width is on the front tire?

[@R0yL33]

Heat shield on the side of the trans tunnel ... how much heat does the trans throw off? or is that to keep exhaust heat out.

[@wehadkeekid]

Mr. Lucky, How much do you or Motortrend have invested in this car? I got a 66 also, but only wish I could do half the things done to this one.

[@luckysgarageshow]

Dave Hurst I got the car for 5500 Trans 1400 engine 1000 rims/tires 1800 injection/fuel management 2500 cooling/AC 3000 ..... this was all done at my shop before I worked with MTOD.

[@futten3230]

rubber poly or solid body to frame bushings? ive got some solid once to use in my 80 regal

[@gjrt7573]

YO lucky how do you make those harbor freight sanding pads last? tricks?

[@TwoHeadedBaby1]

Great vid, love that car. How long have you owned it? Keep up the good work.

[@Stainlessslayer]

I need chevhell in my life😮😮

[@johnbecay6887]

what's the car weigh, Lucky?

[@galaxie500xl7]

What happened to the 51 Chevy V8 swap?

[@michaeljohnson404]

What thread sealer did you use on your line lock? And what brand is it?

[@luckysgarageshow]

Michael Johnson ARP liquid thread sealer

[@stevenvanheel3932]

Is the Chevelle your favorite car?

[@jasonaldean5441]

bad ass ride

[@genefoster7238]

Hey Lucky your the man your the only one thar hasent sold out like frinchfryburger,fineanygan and the off road guy all saleouts looking for a paycheck . Stay with us Lucky

[@mynameis63]

gene foster you are incorrect. David and Mike still have their personal channels on youtube....and while I'm at it..your comments towards the hosts of those shows weren't the ones making the choice to leave youtube. If you're looking to blame anyone...blame the corporations who did this...motortrend, discovery and velocity.

[@Jon38]

Yeah, lock washers are a joke.

[@peninsulahomerenovations9680]

Oh I'll miss Roadkill.

[@peninsulahomerenovations9680]

And of course Hotrod Garage.

[@willardelibolt]

They're still free on the motor trend app. Just to save revenue on KZbin. No subscription required

[@TheDutyPaid]

Willard Libolt sadly not for me as I am in the UK. Even if I paid I would not get all the content viewers in the US would get.

[@CanadaBud23]

Complain to the EU assholes. Probably won't get ye anywhere. Or try some VPNs or something.

[@mikeycornwell0138]

Hard line how to at some point please!

[@stevenvanheel3932]

Michael Cornwell hard line is really easy to figure out. Just watch some videos on here on how to use a flare tool, a tubing cutter, and how to bend the lines.

[@markusvurrgh4549]

LUCKY KEEPING IT REEEEAL. So I won't get into all that ridiculousness but... Maybe do us all a solid and don't bounce your channel to MTOD? Unless they're gonna pay you real nice and comfy-like, in which case SELL SELL SELL! Heh. Seriously though, thanks Lucky, you're the man.

[@396M21]

Road test.....

[@CanadaBud23]

On the street it's "roll control" ;)