Looks like you need to move the steering box forward to move the axle. Could do relocate plates for 1inch.Are you running 84-88 rears up front already? Those have the shortest distance from the front bolt to center pin.
@66Duffman Жыл бұрын
Currently running trail gear fronts…I do wish I moved the box forward but I already put the reinforcement mount where it is
@SingleCab22R Жыл бұрын
Winchers is my favorite beer can. They all look the same!
@66Duffman Жыл бұрын
😂😂😂😂 thanks 🙏🏻
@JoeShmoe-w8m Жыл бұрын
Stretch the front with some Rears and Drop a KP60 in all she needs 💪🏾
@66Duffman Жыл бұрын
🔥
@robertyoung8289 Жыл бұрын
Always wondered how cool are your neighbors? Hope there enthusiasts. 😂
@66Duffman Жыл бұрын
Some are alright with the shenanigans…others not so much 😂
@bobbymulwee7641 Жыл бұрын
Flatbed? Do you still have the Nissan?
@66Duffman Жыл бұрын
Possibly someday…yup the Nissan is still there
@dannyDCC Жыл бұрын
Next time get a basketball and deflate it and stick it in the light housing and inflate the ball should pop some out lol
@66Duffman Жыл бұрын
That’s a good idea 👏🏻
@Tunaslayer1 Жыл бұрын
So, did the canyon get more mud from Hillary? And to everyone viewing this....Why not Subscribe? They deserve more subscriptions. They are a blast!!
@66Duffman Жыл бұрын
It definitely changed a lot…not that much mud but some good hills to play on…we did an update video right after
@Butcher28911 ай бұрын
Not for sure how exactly he did it and what his specs were, but I’m pretty sure my uncle heated the bottom of his fenders with a torch and rolled them inward slightly. He has an 80 something SR5 he did it on.
@Mario562 Жыл бұрын
Love it man 😂 congrats on the Nitto sponsor too!
@66Duffman Жыл бұрын
Thanks 🙏🏻
@horaciolopez7721 Жыл бұрын
You have to cut a little off the leaf springs 😂
@66Duffman Жыл бұрын
Notch it 😂
@gagewilmot5445 Жыл бұрын
@@66Duffman😂
@jeffreyjohnston6843 Жыл бұрын
who goes to a park and pulls up on the rocks they have to keep vehicles out LOL that was to funny? go over and drive around in the park and say I thought that was the gate keeper
@66Duffman Жыл бұрын
😂😂 gotta use the spots nearby
@horaciolopez7721 Жыл бұрын
Hammer, just give it more 🔨
@66Duffman Жыл бұрын
💥🔨
@Heavy.Chevy.4x4 Жыл бұрын
Hell yeah 🤘🔥🤘
@robertyoung8289 Жыл бұрын
Also would like a "tow pig" update when you have time. Must be pretty reliable.
@66Duffman Жыл бұрын
Tow pig is in interesting shape 😂 but regardless I think a update video and maintenance is in order
@rayfitzpatrick8702 Жыл бұрын
I moved my 85's axle forward 2" and still my left front 35" tire hits the firewall/inner fender and even worse now that I put a new 4wd fender on instead of the chewed up but, cheap 2wd eBay fender I had on there, oh well.
@66Duffman Жыл бұрын
Right on 👏🏻
@frankfilippone9679 Жыл бұрын
That would drive me nuts! About 2 on each front rims 😅
@66Duffman Жыл бұрын
😂
@frankfilippone9679 Жыл бұрын
@66Duffman That would drive me even more insane then I already am! Right now my front axle is 1 inch wider on each side then my back axle, already on my 3rd pair of wheel spacers! Here goes another set!
@super1vega Жыл бұрын
Frist post 🎉🎉🎉
@66Duffman Жыл бұрын
👏🏻
@daniellablee6682 Жыл бұрын
Si mas moladora esta buenisimo estos videos ,conta algo sobre la nissan que planes a futuro hay ,saludos👍👏👏👏👏👏👏
@66Duffman Жыл бұрын
El Nissan, no sé qué voy a hacer... ya es una buena construcción, solo necesita mantenimiento... tal vez una tonelada algún día 🍻
@trashman1694 Жыл бұрын
Hello I'd like to also announce I'm supporting Nitto (please gibs free tires)
@66Duffman Жыл бұрын
😂💯
@frankfilippone9679 Жыл бұрын
What's next? A front Dana 60? So you have 8 lugs all around
@66Duffman Жыл бұрын
Hopefully someday 🙏🏻
@jacksonlifsey7291 Жыл бұрын
Cut that front spring hanger off and push it forward a few inches. Use third gen rear springs up front. That should keep the tire out of the fender well.
@66Duffman Жыл бұрын
Only thing is if I cut off that hanger best but it’s gonna be to go Dana 60s 😂
@rcknrby1 Жыл бұрын
How about going flatbed junk that cheap metal crap build a custom one be a great build for your channel
@66Duffman Жыл бұрын
Someday I’ll do something like that, but for now I like the truck look
@myanime101 Жыл бұрын
needows
@66Duffman Жыл бұрын
😂
@chevyforlife1000 Жыл бұрын
whats wrong with the jeep?
@66Duffman Жыл бұрын
Nothing just maintenance 👨🔧
@cameronskaggs4188 Жыл бұрын
Look into getting Bushwacker fender covers makes the cuts look a lot better and you still have the clearance