$68 Chainsaw From TEMU

[@rich77music]

Not trying to sound like a hater... but #1 that rattling you hear is the fuel filter inside the tank that's connected to the fuel line, they're not stationary filters like airfilters, the fuel filters literally dangle from the fuel line and rest on the bottom of the gas tank. #2 the cover was off because some companies had complaints from customers that they had to remove the cover and install the bar before using the first time, when they buy something they want it ready to go as fast as possible, so leaving that cover off solves that potential issue. #3 the things you call "bolts" are actually nuts that go on the bar studs to hold the clutch cover in place and allow the kickback / chainbreak bar to be in the right position for the kickback safety feature to work properly, when you put those nuts back on the bar studs it's really important you make sure the stud nuts are good and snug or else when using the saw the vibration of the engine and the clutch will work those nuts loose and eventually unscrew themselves and fall off like what happened in your situation., but also you do not want to over-tighten the nuts on the studs or else you could strip out the threads and that is a big headache to fix.... so none of that was the saw's fault lol.. just a little operator error. but it's all good, i was naive about that kinda stuff for years too when i first started messing with chainsaws

[@ColeParker-qk7mx]

Exactly. She doesn't need to be doing reviews if she doesn't know what she's talking about. She literally made this saw sound like a POS and broke the first time she used it, but it was her fault it come off!!

[@dwaynefreeman9572]

@@ColeParker-qk7mx I agree 😂 😂 this lil girl is the Kamala Harris of the chainsaw world 😂

[@warreneverhart]

It's kind of sad we have to see a comment like yours on a channel about chainsaws..... That stuff is the basics bro lol. When she kept shaking it and didn't know what that sound was I cringed. Then the cover "falling off" made me bust out laughing lmao.. "These are bolts, they shouldn't come off" 🤣 yeah, that's what happens when you don't tighten them correctly 👀 🤣

[@rich77music]

@@warreneverhart i wasn't trying to be mean or anything lol.. just hated hearing someone trash a chainsaw claiming it to be crappy when it was her inexperience and operator errors that caused her issues. for $70 that's not a bad deal. it would be sad if someone chose not to give the saw a chance just because they watched this video

[@haileyzeiders]

@@rich77music Watching her review literally made me cringe. This is a horrible review or demonstration, whatever she calls it!!

[@danielborth7753]

Yes the cover is off because you need to install the chain and your problem was you didn't tighten the nut enough

[@olveramelinda]

Or she didn’t line it up properly

[@danielpadgett2831]

The cover is not on because you have to put the bar and chain on

[@georgecarter7029]

If you read the instructions and reviews you would know that you have to pull safety stop open to fit the clutch and then tighten rear bolt before front bolt or it will not tighten correctly.

[@steveroxx69]

I watched the video and I knew that as soon as I seen what she had done she pulls a trigger and runs them she doesn't know how to work on them apparent lol

[@briansmith611]

@@steveroxx69 Ya.... hses cute but should NOT work on chainsaws

[@steveroxx69]

I give her credit she's out there doing it she ain't scared take care be safe

[@BrianFincham]

She going to get hurt she goofy

[@GeorgeLockett-r9d]

Hi my name is George , I have the same chainsaw and had no problems with it for two years and it runs amazing

[@chainsawjenna]

Oh nice! Got a couple things I’ll do with it to see if it will help the nuts from unwinding. We’ll give it another go 😁👍

[@GeorgeLockett-r9d]

When I run my chainsaw the bar nuts don’t come off like that .

[@Swarley218]

@@chainsawjenna sounds like a temu employee lol

[@Adawg5353]

Considering that Temu was founded less than 2 years ago, I find that hard to believe. Oh but you must've recognized it from the brand. The "Chainsaw" brand obviously.

[@marktarascio4766]

Yeah on the shelf it will last for years

[@patc7198]

I feel like I went to the circus to see a clown

[@BrianFincham]

She doesn't need a saw

[@dillansgarage]

You’re nice

[@slivencartel]

And the voice is so annoying

[@motorrad2]

I was 12 once too.

[@inktownfishing4505]

Pure example of the blind leading the blind!

[@munch762]

People like this get other people like them hurt

[@bobbylibertini]

Well...yeah...but she's cute....

[@inktownfishing4505]

@@bobbylibertini That's why I watched...lol!

[@davefenna6741]

Those bolts are called Nuts !

[@mikeditomaso4451]

Didn’t want to say NUTS.

[@rigorocks23]

A couple pressure washers or some loctite would solve her issue

[@jeremiahbates7569]

I'd like to know how long that saw lasts after the immediate full throttle.

[@ericfore]

It looks like the problem is the chain brake is engaged on the clutch cover, so the brake ring is too tight to slip over the clutch. Take off the clutch cover, pull the brake handle back, and it should fit over the clutch.

[@chainsawjenna]

I will take a look thank you! 😁👍

[@broman6662]

Some assembly required 😄 This video scared the hell out of me!

[@chainsawjenna]

Scarys me too I hate watching myself after a video is made 🤣🤣🤣🤣

[@broman6662]

@@chainsawjenna But only the chainsaw was scary to me😂

[@kevinreeves3161]

Take your time and put the bolts on right I got one it work for 2years and still works

[@frostyacidity8030]

Temu wasn’t founded 2 years ago? And what’s the brand of the chainsaw? China?

[@rigorocks23]

@@frostyacidity8030ebay brand 😂

[@walter2670]

That noise is probably a fuel filter rattling in the tank. Seems like a decent homeowner saw for someone who runs a tank a year or so. Impressive price.

[@dew6874]

I now want to order things of the Internet just to open the package with a chainsaw!! I believe you may have started a new trend!!!!

[@ericc1599]

I’m sure she seen it from Peg (zip ties & bias plies) he’s done that for years! This chic shouldn’t operate a can opener..lol

[@MikeHoncho0811]

AVE use to do it on his tool reviews

[@RuneCarverLLC]

😳💁 Hmmm... for $68 that went pretty well. 👍 The rattle is probably the klunker fuel pickup design. Basically a big brass fitting at the end of the soft flexible fuel line is heavy so the fuel pickup is always at the bottom in any position... it's a pretty reliable design and is used on aircraft and some race boats. I would like to see you see that up with a small detail bar and see how long it lasts before a rebuild is needed. I've been watching some of the Temu boat outboard videos and they are surprisingly reliable engines, just poorly designed mounts and props on some models. I'm glad it worked so well! 👍👍👍

[@ROGZI3L]

Good energy, fun review. Don't drop start saws, it's dangerous. Your nut fell off because it wasn't tightened properly, no need for lockwashers, that's weird advice someone gave, as nut to metal will hold better, lockwashers will spread out and fall off eventually while using the saw and your chain would fall off while cutting. When you tighten a saw chain hold the tip of the bar up or rest it on something to hold it up while you tighten the bar nuts, the chain drivers should be about 2/3s of the way out of the bar when you tug on the chain and pull down moderately. Use the bar wrench screwdriver shaft to lock into a tooth and turn the chain on the bar. You should be able to make the chain turn freely while using a couple fingers on the saw body for stability but not adult having to hold the saw down.

[@dennismatson]

Jenna i give you credit for trying different chain saws. Soon you will have everyone thats made. Becareful with the cheap ones. They do fall apart.. i suggest staying.with brand names. Like the ones you carve with...stay safe...and keep carving.😊

[@chainsawjenna]

That would be a crazy collection have ever chainsaw that was made 🫣😳

[@dennismatson]

@@chainsawjenna it would be cool.

[@CajunReaper95]

You have an adorable yet chaotic personality!

[@SkriLLex22525]

Shawty is on crack

[@jimrenfrew3687]

She should be blonde lol

[@MLSAWS1]

ahhaahhahahahah😐

[@Zebracat5]

You are one of a kind. I think People like you make the World a better place. Thanks for the Video.

[@dlfabrications]

The cover stud bushing does not have a large enough outer diameter so the bar nut makes contact with a too small surface area. Not enough friction and it ends up coming loss, I think?🤔

[@stannelson2582]

I bet she has conversations with her self out load even without the camera. Too funny.

[@gmchd07]

It sounds just like a husqvarna

[@BillyFloyd-bg3gn]

The whole thing about the side cover... Chinese companies don't put them on alot of times so they don't get broken in shipping. Bar nuts can vibrate off 1500 dollar saws... it happens. The throttle lock is probably in place because the Chinese carbs don't have partial throttle lock after choking like oem carbs. Hope this cleared some things up.

[@LoneStarMillennial]

Even if the bar nuts came off despite you tightening them appropriately, this is easily fixed with lock nuts or even just lock washers (less convenient) from the hardware store. So it would still be a $69 bargain chain saw.

[@TheodoreM-wp6cs]

Does it have an ez start that’s impossible to drop start? Btw it’s pretty much the same saw at the pinkway. Just another Chinese clone. You have to finesse that cover on. Make sure the chain brake is disengaged when mounting. It will go on correct you just need to play with it. The throttle lock is to help starting it, since it has no primer bulb.

[@Its_about_that_time]

I came here hoping this was a legit review but she has no idea what's she's doing

[@SomeGuysSawShop]

Definitely not the worst saw I’ve seen😂 in all honesty it’s cool they can make theym so cheap but I’d definitely have one as a beater saw to keep in a truck

[@chainsawjenna]

These saws are definitely beaters. It is pretty impressive I hope we find a cheaper one! 😂😂😂

[@Jesus4444me]

Who opens a box with a chainsaw!!! Thats awesome XD

[@johnhabeck6153]

And not just a box, but a box with a chainsaw - what else....?

[@ryanfriars545]

Be careful. Having that side cover coming off, or not seated completely can be very hazardous. It may be hanging up on the brake assembly too.

[@Eugenekrabs8988]

I don't get the some of the hate going on in this comments I'd like to say, your energy is amazing and you're super cute!! keep doing what you're doing!

[@topspeeddaily7179]

New chain you have a little thing called stitch . You may have to adjust it a lot.

[@LoneStarMillennial]

That saw is better looking than a Stihl!

[@ukraineforever6410]

A split washer will keep that bolt on, i usually replace all the bolts on my hedges and chainsaws with better quality butterfly nuts and split washers so i can tighten with small multi grips

[@scottbaker4314]

If the manufacturer wanted the use of lock washers then they would have put them on it. It's made to use flange nuts

[@CajunReaper95]

@@scottbaker4314the manufacturer doesn’t give a shit if it falls apart it’s cheap enough people could buy a new one and by the time you go through so many you could’ve saved that money and bought a quality chainsaw.

[@blasto1926]

I'll give that chainsaw one thing. The muffler is in a better spot compared to where MTD has been sticking them on Troy-Bilt and Craftsman. The bar and chain oil splashes off of it in a vapor cloud. Several times, I thought the bar was burning, lol.

[@kyledavis5408]

For your next chainsaw buy and try I'd like to see you get the new Bad-Boy 14 in. gas chainsaw. I've been thinking about getting one since I have Bad-Boy zero turns, and love them. But I'd like to see/get your opinion about that saw. Surely it wouldn't be any worse than most Chinese chainsaws?. Thanks for your time!

[@sunriseboy4837]

She's about as convincing as a three dollar note!

[@glendonw8888]

you can mix yur gas a bit stronger ...since its new,and needs to be broken in. You do not have to be exact..give it more oil!

[@davidegilmore8939]

you didnt tighten the side cover bolts enough. I have 2 of these saws and they run and work great. For the price these saws work great . Too bad they are not made here in USA.

[@davidnovicki2416]

If you would have tighten up the nuts first they wouldn't have fallen off. It would have started quicker if you would have used the choke. Ding bat.

[@TL50-r9f]

Good thing you have a Stihl... Stihl, Husqvarna, Jonsered and Dolmar are the best and last long. My Husqvarna 365 24 years old still runs perfect.

[@MikGamingDJMike]

normally if you play with the brake it should fit. I have a supmix chainsaw that has the same problem. Take 1-2 minutes to fix.

[@baitwaitfishing7625]

Or does she?🤔

[@billyshumate853]

Oh lord 😂😂 Gonna have to really tighten the bar nuts 😳. Take care and have a blessed and safe day 🙏

[@chainsawjenna]

It was really tight that’s the thing 😂😂😂😂 It happens sometimes even to my stihls. We’ll do some adjustments to see if it helps the nuts from unwinding. Thanks for watching Billy! 😁😁

[@bluery8]

It won't fall off if you tighten it correctly

[@driftlesshunter9200]

I've never seen someone open a box with a chainsaw before. That alone was more impressive than the chainsaw. 😃

[@chainsawjenna]

Haha thank you I love doing it every chance I get! 😄

[@ksk5517]

For its price, it looks like a saw worth buying.

[@fishing_with_chaz]

your personality plus chainsaws is so entertaining. this was absolutely hilarious to watch. your personality makes these videos absolutely hilarious keep them coming i'm sure you make everyone laugh or at least smile and brighten their day. for anyone wondering she prolly bought the saw for laughs

[@chainsawjenna]

Hahaha I definitely bought this for laughs 😂😂😂 Thank you for the sweet comment! 🫶😁

[@topspeeddaily7179]

I love my Chinese saw it's been great.

[@mikebradford7780]

Hello. I trust your opinion as you use saws for a living. I am looking for a 16" saw that can be used to fell some smaller trees on our homestead, as well as de-limb them. Need to be able to run it for some extended periods of time. A couple on my list are the Echo CS-3510 as well as the Husqvarna 435. What are your thoughts on these two as well as possibly others? I chose these two manufacturers due to their precieved realiablity as well as 5yr consumer warranty. Thank you for any insight that you can give me.

[@ericc1599]

Buy the Echo….Husqvarna’s are getting bad! This chic should go back in the kitchen and make more sandwiches!!

[@robertpatterson7182]

IT JINGLES! That was my favorite comment about the saw.

[@Surfbeagle381]

Wow some of the comments are so out of touch it’s unbelievable a pro chainsaw carvers doesn’t know how to tighten up the nuts on a chainsaw really Grown men having a problem with a lady carver. Shameful I enjoy your content and your art. Everyone has to wade through haters to get to victory Family members called it the contraption Thank God Henry Ford ignored them!

[@itzhackkiller6927]

Here in Hungary you can get a chainsaw for around 30 dollars.

[@angieolli5022]

How high is your average salary tho brother

[@itzhackkiller6927]

@@angieolli5022 800-1000$ But we also have very high taxes, so you barely make it thru with that money.

[@brandonhoad9033]

All the stickers are so ya don't confuse it w a road grader

[@NONAMEn1]

I sometimes buy different things on Temu and I have to admit to you - there is a lot of low-quality junk there. The girl was lucky that the saw didn’t hurt her

[@blackmanzproductionz]

Okay but this was clearly user error for the sake of bashing something Chinese even though China makes over half of everything in America, good or bad quality. 🥱

[@topspeeddaily7179]

How does it run at ,25 to 1 I mix everything 50 to one

[@chainsawjenna]

It's probably a clone from an older saws that use to run 25:1

[@xqxxy686]

I stopped believing in Santa because I didn't get a chainsaw for Christmas.

[@breadyblox2263]

I really like your videos! I like how energetic you are and you showcase all aspects of testing this product and I will be getting this for my uncle

[@lilscar08]

Can someone please make a video on how to put it together, i kniw it looks simple but would be very helpful, know i didnt miss anything

[@kanarimentos7056]

how is the saw going on

[@guntherpetutschnig2705]

How long you carv with the chainsaw at now

[@RepentB4TooLate]

You should thank Temu cause I looked for a video and it came up to you! Glad I found you and love your videos! Subscribed! Greetings from California West Coast 🇺🇸🇲🇽👊😎

[@jasonbates9716]

Keep this girl away from a chainsaw

[@REDLINERUNNER]

What do you do with so many chainsaws???

[@Joe-f9q]

She might be a little dingy! But she is adorable!

[@bryanjones14]

How many CC's is it ... Did i miss that

[@paulfrevert3662]

I bought a 4 stroke china saw and it been amazingly reliable

[@Surg1GamesNSuch]

I got one and it says the gas to oil ratio is 25-1(which is weird anyway) and yet i cant get it to start up

[@Surg1GamesNSuch]

Just got her running this morning =]

[@timberandtools]

The Proyama (zenoah) clone saws are actually decent

[@nexusstalker]

this is a beginner u didn't tighten the nut enough took many attempts at tightening the chain

[@patc7198]

I wonder if thats how she is in real life?

[@kevinbeck6419]

I've got the same saw no problem had for three years

[@frostyacidity8030]

Dude Temu wasn’t even a thing three years ago? And what’s the brand? China?

[@MCEdziits]

The question is - which one lasts longer - 10 "Professional" chainsaws or 1 stihl chainsaw 😅

[@noelduffey2395]

It looks as if you are left handed? Just be aware of the kickback . 👍

[@marktarascio4766]

So it does not kick back on right hand people ? 😂

[@Friend-i3e]

So um the side is not on bc the blade would not fit in that box

[@jasonjones5213]

Seemed to cut ok until the nut fell off.like to see it used more after you do the fixes on it.

[@chainsawjenna]

Definitely will get it running again and do more test here soon 😁😁👍

[@den0matic]

The only part that was operator assembled came loose. Just sayin'.

[@joerivanlooy686]

12 pulls needet with a brand New chainsaw super funny jenna 😂😂😂😂😂😂😂

[@thehonestwoodcutterbradywe8011]

I have several clones.you don't need to run 25:1.40:1 is fine

[@chainsawjenna]

Yea, I've just been using my aspen fuel for it.

[@thetwistedlocust]

Shop like a billionaire that lives on the other side of the country! True story... We live in NC and Temu addressed our package to somewhere in Long Beach, CA. 5000km away. Over two months later we haven't gotten a refund or a replacement. They suggested we check with our neighbors on the other side of the country. The USPS can't give us the exact address so we can't even make the three day drive to retrieve our purchase. Shop like a billionaire that isn't concerned about the loss of nearly $100!!! DON'T WASTE YOUR MONEY!!!

[@johngermany2089]

Buy it with a credit card and dispute the charge. It happens and most companies respond better once you have lodged the official complaint with the CC company.

[@Jfresh55]

That's not a bolt that fell off. Called a nut

[@topspeeddaily7179]

She doesn't need to handle a saw .

[@josephparnell5020]

That piece that you're complaining about it not being attached needed to be that way so the bar could be put on it. Some people shouldn't own chainsaws

[@johndell8679]

Well there's 8:32 I'll never get back.

[@Sernaabq]

The rattling would freak me out

[@MrGiXxEr]

Now THIS is some quality content!!! Keep this up, love these silly reviews.

[@toddepperson7465]

i gave you a like because oh the puppy dawg helping out

[@bryanjones14]

Its not a left handed saw duh

[@xxbambamxx7261]

That carb was not adjusted properly 😐

[@kooscoolen4543]

No competitor for Stihl or Husqvarna. Why the hell did you buy that trash anyway ?

[@chainsawjenna]

For laughs and just out of curiosity 😄😄😄

[@dennisbrown1682]

could you do a bullfrog someday?

[@boy2424100]

Please stay away from chainsaws

[@HokageZebra]

Why

[@TravisInCanada1]

In 2008, the newest Stihl production facility opened in Qingdao, China.

[@chainsawjenna]

Interesting

[@JewsRock-ILJ]

China uses the old stihl design. Its actually pretty reliable.

[@modifiedchevy]

Actually these are zenoah clones

[@trucker85d47]

The chain brake looks like it not on the clutch properly 🇺🇸🇺🇸🙏🌹

[@danielborth7753]

It's all your fault that fall apart

[@masterk5066]

Meanwhile I just bought a $25 battery Mini chainsaw off Amazon 😂. Aseboy 8"mini chainsaw with 1 battery. Using it for basic yardwork only on my house so not too worried about it. These big companies are not your friends some of the prices that they charge for the tool alone WTF. I might get this Shoot red loctite them bolts & keep it pushing.

[@NC17sniperUSRPRODUCTIONS]

Replace the nuts with nyloc nuts, but i still wouldn't trust it XD.

[@Rickj420]

There’s no bar chain oil in the reservoir thats not good😂