6g Welding Test Monster Coupon TIG Root

  Рет қаралды 232,891

weldingtipsandtricks

weldingtipsandtricks

Күн бұрын

Пікірлер: 146
@haroldwatkins7059
@haroldwatkins7059 6 жыл бұрын
Mr. Collier, I have enjoyed your excellent videos for years now. I have lived long enough now to see my last daughter leave for college. As a sole possession father for 15 years of a mess of girls, I have always dreamed of going to Fabtek to meet your and Mr, Moffatt. I never could afford it. I have now already paid for my flight and hotel for Fabtek this year. I look so forward to taking a moment of your valuable time to express how much assistance you have been to myself and my small group of students. I am a 100% disabled veteran and all the others are the same to my home each week to give them the pride to learn about welding. It gives them such satisfaction and pride. They watch your and Mr. Moffatts videos weekly and it helps so much. Your videos help our group of misfits more than you will ever know. From all of us, I say Thank You and hope to meet you. The interview with the lady from Georgia Trade school was Great.
@weldingtipsandtricks
@weldingtipsandtricks 6 жыл бұрын
I am looking forward to meeting you ...Pretty sure Bob will be there as well.
@apolinarsosa8423
@apolinarsosa8423 6 жыл бұрын
Hola me gustan muchos tu videos, me gustaría ser como tu, me encanta la soldadura.
@jonathon8856
@jonathon8856 Жыл бұрын
Beautiful wedding band on your stainless man. I'm a boilermaker apprentice now I've been a subscriber ever since I started trade school in 2015. One important thing I didn't hear you mention are "FISH EYES". If you don't walk the torch out the bevel you risk leaving a "Fisheye" in the root. When the inspector sees your root to advance to fill and cap that will fail you. Not everyone is as experienced as you and might put in excessive reinforcement. If your heavy on your root and a grinder is permitted you can feather the root, turn your machine up to weld back over the root without filler to "suck back" excessive reinforcement. If someone isn't experienced enough to weld a root perfect they can still pass if they know how to avoid and fix any mistakes
@_ErIc1976
@_ErIc1976 4 жыл бұрын
Jody I’m a union boilermaker and you have helped me pass some welding tests for sure thanks Jody !! God bless ya man
@jonathon8856
@jonathon8856 2 жыл бұрын
I just got my letter 😀
@KL-ml4xw
@KL-ml4xw 6 жыл бұрын
Skipping through and listened to the interview with the young lady and at 12:00 makes me really appreciate being a union hand. While I agree with her comment I do not agree with disqualifying someone because they are not a suck ass. You are hiring someone on their skill set in a craft not because they are a people person. Aside from that I love the vids, I use your tig finger regularly and I appreciate the effort you put into making quality content.
@dizzolve
@dizzolve 6 жыл бұрын
Great video man - I'm not a welder but I really appreciate the nature of videos and channels like this that spread knowledge generously for the betterment of ALL. tip of the cap
@9235wayne
@9235wayne 6 жыл бұрын
Hi Jodie, I'm the RT UT Welding Lead Hand of BWXT Canada Ltd. All of our Nuclear pressure related TSSA welds are based on this XXH schedule Super coupon pipe. 1 1/2 ID, 2 3/4" OD for TIG and stick in all of Carbon Steel, Stainless and inconel. Half the applicants don't pass the initial stick carbon steel entry test. if they do, they have 3 levels of testing afterwards with the previous mentioned metals/processes and it's not easy to find welders who can do it as flawlessly as myself or the other senior RT UT Welders. We do have more BWXT specific critical weld tests that must be passed as well, one of which takes days to finish the joint with stick. Your video is a good example of the tig root for this coupon. From my experience, critical/RT UT quality TIG welders are not common amongst the younger folk. If you can share some Inconel stick and Stainless stick on this coupon, they can see the behaviour and nature of welding metals that can be prone to inclusions if not performed at the highest skill. Good video :)
@KennyInVegas
@KennyInVegas 6 жыл бұрын
Without a doubt the worst day of my welding history came from too much coffee..... not drugs or alcohol but really strong coffee that I really liked to brew at home. Thank God for grinders on that day!!!! I actually had to drink a beer to calm my nerves for 3G fillet welds. Never had a problem with coffee before but HOLY COW I can still remember my hilarious attempts of joining 2 pieces of 1/4" plate together. No digital cameras back then....... Thanks for video...... God bless you and yours!
@ksworker4680
@ksworker4680 6 жыл бұрын
This welding videos you make has halped me alot ,im so thankfull. Keep doing you wonderfull work.
@trevorbagley6383
@trevorbagley6383 4 жыл бұрын
I went to a 3 month welding trade program. After getting some basic certifications I wanted to get the the job that would give me the most experience possible. I applied for a job shop and the guy interviewing me liked my attitude so much that he didn't even give me a weld test. He hired me on the spot. That job had machinists, CNC operators welders and fabricators of all kinds. I had the chance to do a bit of everything and it was a great experience. Shoot for the best and just do it.
@dazdavis7896
@dazdavis7896 2 жыл бұрын
Yeah. Always aim high. Always above your “level” , If you get it, then you’re like well damn, alright then.
@lyfoon
@lyfoon 2 жыл бұрын
@@dazdavis7896 currently in that position haha, feel like i have imposter syndrome, i finished my 2 month welding course (only 2 weeks tig) in october, and now im in a ASME pressure vessel tig welder/fitter, and we do exotic alloys haha, first day there they said lets certify him in c276 on 1/4" pipe 6g, you can imagine how that got my stomach feeling seeing that i had never done anything smaller than 8" carbon pipe on a rotator never done 6g xD , passed it though but busted on my sch 160 carbon monster ticket, theyre letting me retry that so i hope all goes well lol
@SupraSav
@SupraSav 2 жыл бұрын
Thanks Jody. Another solid video. I test for another position in my company next week, this was extremely helpful!
@momobadilak
@momobadilak 6 жыл бұрын
The advice about having a positive attitude and to assume the interviewer *wants* to hire you is very very good.
@Henrik.Yngvesson
@Henrik.Yngvesson 6 жыл бұрын
On the root I use to do a falling weld on the top side for better control of the root size. You may not be able to do it on a test as it's not allowed to do falling welds with TIG but it's so much easier to control the root bulge and especially if the joint is a bit wide. But this is only for open root welds and on the top half as you would risk lack of fusion otherwise. The molten puddle will hang from the top and run out to the sides where it cools down and stop flowing and you can still hold a nice key hole and the added filler will tend to run to the sides instead of forming a large bulge in the middle and get pulled down as it would going uphill. That way you get a very smooth and almost flat root with just a slight bulge.
@lyfoon
@lyfoon 2 жыл бұрын
what is a falling weld? im doing my tssa 6g sch 140, and i cant seem to get reinforcement on my root :/
@Henrik.Yngvesson
@Henrik.Yngvesson 2 жыл бұрын
@@lyfoon You start at the top and going down.
@skull_grinder2191
@skull_grinder2191 6 жыл бұрын
Any titanium welding videos coming up?
@John-Adams-Can
@John-Adams-Can 6 жыл бұрын
Can you imagine being the guy testing Jody? Very good interview. I agree about the caffeine thing it has been my biggest improvement by just getting rid of it! Can't believe the difference in steadiness.
@cryangallegos
@cryangallegos 6 жыл бұрын
DEFINITELY, had to give up coffee for about a month to be able to get steady enough! I absolutely understand why they talk about the old-timers having a cold one or two to get rid of their shaky hands
@bendavison222
@bendavison222 6 жыл бұрын
That was an amazing video. Thank you for taking the time to make it. The TIG finger is the real deal too. I've got 2 and use them daily. Upped my welding for a few bucks! Thank you.
@nicholaswalker5219
@nicholaswalker5219 11 ай бұрын
I work at ingalls, 2 years now. Structural & pipe welding currently a pipe welder & If u want Beginner experience & looking for a craft to get into I recommend it but if u want to look for real professional experience I recommend looking for a new opportunity because u won’t weld anything beveled I won’t say too much about the details but yea u won’t get any industry experience it’s Alot different from shipyard experience & industry experience
@MikeSmith-sm4zz
@MikeSmith-sm4zz 6 жыл бұрын
Thanks Jody, you’re the best on so many levels. Class act!
@Paul-zv2lo
@Paul-zv2lo 5 жыл бұрын
Mr.Collier, thank you for this insightful video. I appreciate everything you do for us as viewers these videos are priceless and has helped me immensely. Thank you and I wish you nothing but the best.
@gerhardvictor5475
@gerhardvictor5475 6 жыл бұрын
Hi Jody. Thanks for the time and trouble you spend in the great material you share. I am just started with welding disciplines and have gained so much for your videos. Thanks again out of South Africa.
@gunterschone8402
@gunterschone8402 6 жыл бұрын
Nice video. Just like you welded the root. So is the welder test for TIG welding, for pipe welding tests in Germany. Clamped in 45 ° and then may not be re-clamped. So it is with thin pipe 2-5mm and for thick pipes.
@bikesfightback
@bikesfightback 4 ай бұрын
Hi Jody... Going back and watching some old videos as I have to do 6G 3" XXS on steel pipe.. Tig root, stick fill and cap. Any recommendations for heat on the root?
@justinhughes5663
@justinhughes5663 6 жыл бұрын
Please do a 2"sch10 stainless pipe. I would like to get your opinion on what's the best way to tack and where to feed the rod doing backfeeding
@maustank8864
@maustank8864 6 жыл бұрын
Justin Hughes he doesn’t shoot the gap or “backfeed “but his dip technique is phenomenal
@justinhughes5663
@justinhughes5663 6 жыл бұрын
Brad Albrant I need to see someone prepping a 2" and also back feed root
@makerintraining1730
@makerintraining1730 6 жыл бұрын
The standard boilermaker common arc test! I know it well. Only allowed a file and a hand brush. Awesome to see you do it.
@makerintraining1730
@makerintraining1730 6 жыл бұрын
Liability I would assume.
@makerintraining1730
@makerintraining1730 6 жыл бұрын
That’s what the hall tells us anyways haha
@jonathon8856
@jonathon8856 2 жыл бұрын
my first common ark is this January. I just got in. They let me test plate at boot camp to see where I'm at and I got plate but that's not tube lol
@michaelcostello6991
@michaelcostello6991 3 жыл бұрын
What size TIG torch is best for root weld ?? Does it matter ?
@board2live11
@board2live11 2 жыл бұрын
Can you do the lay wire technique in the vertical position or is it strictly in the horizontal position
@spid3rmike117
@spid3rmike117 2 жыл бұрын
I have to pass this exact test for Epic Piping in Louisiana. The job pays over $30 per hour but you have to pass x-ray on 6G schedule 160 to get the job🥵
@jamesposs
@jamesposs 2 жыл бұрын
Attitude is everything!! I just got a welding job the other day and I failed my welding test BUT my attitude was super positive & the instructor told me to come back in 6days and retake the test & I passed. I’m pretty sure my attitude was it ❤️. Good luck out there y’all 👍🏾
@Bryan-nh1xn
@Bryan-nh1xn 6 жыл бұрын
What type of situation do you have to take a hand written test in Welding
@Argosh
@Argosh 6 жыл бұрын
Everytime I see the hoops you have to jump with aircooled stuff I'm glad I got myself a watercooled MIG/MAG welder from the start. Hella expensive, but worth every last penny.
@BlvckCrwn
@BlvckCrwn 4 жыл бұрын
Can you use the walking the cup method on a 6G root versus free hand or is that simply just personal preference and what you’re comfortable with?
@aerialrescuesolutions3277
@aerialrescuesolutions3277 3 жыл бұрын
Awesome video. I just found this. Your discussion with Sydney was totally informative and really valuable; I'm going to the Pod-cast with you two now. Thank you again for your real world videos and great content (as always) Jim Tree
@joeymendoza6017
@joeymendoza6017 Жыл бұрын
U for got to say what temp are u running the tig
@TheNicko773
@TheNicko773 6 жыл бұрын
Very good video. Educational and informative. That 20 minutes went by so fast wish it was an hour long. Thanks for the upload Jody.
@ronmiller682
@ronmiller682 6 жыл бұрын
Great video makes me want to get more into welding ,but having back surgery along with a bad back makes you figure out better ways to weld
@terrylacey2631
@terrylacey2631 4 жыл бұрын
Do you use a feather edge as well as the 1/8 gap
@lewistodd4458
@lewistodd4458 5 жыл бұрын
What’s your amp on the root
@liv2ryd94
@liv2ryd94 6 жыл бұрын
As always a great video Jody. Your videos always inspire me to me a better welder.
@ilyafilru
@ilyafilru 11 ай бұрын
When I was a welder I originally certified through my local community college. It was nearly free.
@josephkingston9252
@josephkingston9252 2 жыл бұрын
Their open root pipe stick test is with 7018, so don't forget to set the machine at d negative when root pass is with 7018.
@xxstr8jacketxx
@xxstr8jacketxx 4 жыл бұрын
I'm in the ship yard and copper nickel is absolutely everywhere!
@danielkennedy8530
@danielkennedy8530 5 жыл бұрын
Hey Jodi, can you do a schedule 40 2 inch in the 6G position with all stick electrodes. I'm struggling
@micbanand
@micbanand 6 жыл бұрын
At my local school. when we do tests. the always heat when black pipes, when doing Tig to 200 c. its HOT :)
@edgarbanuelos2342
@edgarbanuelos2342 4 жыл бұрын
Are you using CK’s gas saving kit? I know I shouldn’t learn to TIG weld with massive cups because they hide mistakes. Do the gas saver kits do the same?
@engineerme7339
@engineerme7339 Жыл бұрын
What's the spec for pipe coupon that works best for 6g?
@johnw4590
@johnw4590 6 жыл бұрын
👍Thank you for time to demonstrate your technique! Always very informative. Wish you were around when I started welding! ⚡
@franksalterego
@franksalterego 6 жыл бұрын
The interview with Sydney was extremely informative. What is a ball-park wage for starting-out welders these days?
@bimcassano
@bimcassano 6 жыл бұрын
franksalterego There are many factors but from my 4 years of working in fab shops in MI I would say around $18/hr
@ryanowens2771
@ryanowens2771 6 жыл бұрын
franksalterego been welding for 16 years professionally and starting in a non-union shop can be a $12-13/hr job....in a union shop $19-20 start depending on what union. If you are a great welder and hard working in non-union shops you can get up to mid $20s/hr, in a union job 4 years in can be making $45/hr but you gotta pay dues. Not too bad for no time in college. Been self employed for a while now and if I bid properly and work hard I make union rates on average. Hard work and hot work but satisfying!!
@danielkennedy8530
@danielkennedy8530 5 жыл бұрын
I make $48 an hour welding in the mechanical field.
@bernardolugo2515
@bernardolugo2515 4 жыл бұрын
Do have videos on ER90S-B9 testing
@garyteague4480
@garyteague4480 5 жыл бұрын
Looks great Jody ! I love your honesty
@joshwilliams9248
@joshwilliams9248 4 жыл бұрын
That "too much coffee" failed me but given a chance to cool down and a bit of chatting allowed me a second chance to absolutely nail a few cert tests.
@matthewsaint8643
@matthewsaint8643 6 жыл бұрын
Do you have any tips for welding aluminum certification?
@betoelargoneromex9828
@betoelargoneromex9828 2 жыл бұрын
Could you put a subtitle for those of us who do not understand the language 100%? You should know that there is a lot of the Latin community that follows your videos 😉 Thank you very much. Greetings.
@christianobispo3035
@christianobispo3035 5 жыл бұрын
Very good this video. I would like to know if you have some information about welding for sheet of 0.5 mm for aeronaltc components. I'm Bispo and I work an company of helicopter in Brazil. Thank you.
@koshjosak
@koshjosak 6 жыл бұрын
Was hoping you’d do do one of these! Great stuff!
@bcbloc02
@bcbloc02 6 жыл бұрын
That looks like a lot of gap. I assume that is a standard dimension per the test? What is it 1/4"?
@weldingtipsandtricks
@weldingtipsandtricks 6 жыл бұрын
5/32" gap. ASME pipe codes like b31.1 mostly allow for 1/8" plus or minus 1/32"
@MrMaximo10
@MrMaximo10 6 жыл бұрын
Hi Jody just quick question I am in Uk and the welding constructor hi give me to weld plate 3g position with welding rods 7016. so I ask him way we not use 7018 because hi say this welding rots are better it's that true?
@billk5727
@billk5727 6 жыл бұрын
Thanks for making videos and sharing knowledge with us. And the interview tips with the lady apply to a lot of situations in life. Take Care.
@FamilyKliashtorny
@FamilyKliashtorny 5 ай бұрын
It would be better to see the ampere on which something is being done here.
@arifinarifin221
@arifinarifin221 5 жыл бұрын
I want have to becam welder Tig ..this video very help for study...thank you very much... Indonesia
@xxmrgalaxyxx
@xxmrgalaxyxx 5 жыл бұрын
dumb question, whenever i tack up pipe i do the four penetrated tacks and as i weld around the pipe especially with tig the gap seems to start off great and by the time im done its slammed shut on me. How/why does it do that
@mohammedabdullatef4773
@mohammedabdullatef4773 6 жыл бұрын
Hello .. can i convert a 200A ac arc welder into ac tig welder and weld aluminum using hilum
@josephkingston9252
@josephkingston9252 2 жыл бұрын
I'm from the Gulf coast of Mississippi and I've always been told by other welders who worked at Ingalls ship building that you do not want to work at a ship yard, some of the nightmares that I've heard about ingles surpasses any other place I've ever worked, years ago 6 welders dropped dead because somebody left a Heli- torch on, and it was leaking throughout the night and when the next shift came the argon that you cannot smell doesn't have an odor filled up the lungs of 6 welders and they dropped dead , ingles is always a high stress place And it's dirty welding, filthy conditions to Weld in, And next to the ship yard you do not want to be a tube welder for the boilermakers, the boiler makers has the highest fatility rate and most of the time with the boiler makers even though you're hiered on as a welder you hardly ever get to weld, you have to do strenuous backbreaking bull gang work , which is a fancy term for common labor work.
@77mrswag
@77mrswag 5 жыл бұрын
What size cup you used on the root
@Scheffy93
@Scheffy93 5 жыл бұрын
What local are you in Jody? How do I purchase a tig finger?
@kennyglover5095
@kennyglover5095 4 жыл бұрын
Thank you new port news va is a great paying place i really want to to take a pipe test there if all possible
@aaronolson1967
@aaronolson1967 6 жыл бұрын
Hell yeah....love the vid, this is the coupons that is used for every job I go on as a boilermaker....my favorite coupons of all of them....I do mine a bit different but I love the vids Jody....I’ve been watching you for over six years now....love all of your vids....best welding vids on KZbin
@tmonnmiles
@tmonnmiles 6 жыл бұрын
I'm doing one of these Friday
@itsnotlevel2
@itsnotlevel2 6 жыл бұрын
THANK YOU Sidni....😍
@boroturkes7786
@boroturkes7786 2 жыл бұрын
Great video really helpfull. Thanks Jody.
@nickaylett1360
@nickaylett1360 6 жыл бұрын
Jody I like the new video thumbnail!
@rainsrapidly
@rainsrapidly 6 жыл бұрын
Passed my first 6G monster test my first try ...tig/stick...in 2016 ...but ours was for Boilers of America and I was the first done (in a restrictor!)...😌☕talk about sweating imaginary balls
@benchadwick1754
@benchadwick1754 6 жыл бұрын
I can't believe I am not the first to comment after only 29 minutes! Thanks for the seemingly endless pool of knowledge! BTW my name is not Mason, it's Ben. My son changed my Google profile name and now they won't let me change it back!
@chaswood1234
@chaswood1234 6 жыл бұрын
Sidney is a Brilliant!
@jamessonger3
@jamessonger3 6 жыл бұрын
Awesome interview!!
@mattharper588
@mattharper588 2 жыл бұрын
Jody’s tig finger is nice but if you don’t have one you can use a tig cup just put it on your pinkie finger
@juanmatamala2011
@juanmatamala2011 5 жыл бұрын
Maestros acendidos saludos desde chile
@mggrdmgid2429
@mggrdmgid2429 6 жыл бұрын
do you sale those cups
@m211pipelinepioneers7
@m211pipelinepioneers7 6 жыл бұрын
Nice Job Jody!
@welditup9559
@welditup9559 6 жыл бұрын
What sched is that pipe? 160
@michaelvaughn2287
@michaelvaughn2287 4 жыл бұрын
Impress me with 6G restricted thin wall . Or really do something and pull an insert .
@mikesmith8447
@mikesmith8447 6 жыл бұрын
As always great video
@desmoducati9352
@desmoducati9352 6 жыл бұрын
Lo seguo sempre con molto interesse e ammirazione è bravissimo mi piacerebbe molto averlo come insegnante visto che qui dove sono io nessuno è intenzionato ad insegnarti
@saeedkhatab9158
@saeedkhatab9158 5 жыл бұрын
Thank you
@paulmorrey733
@paulmorrey733 6 жыл бұрын
Thanks Jody
@chaswood1234
@chaswood1234 6 жыл бұрын
Great advice!
@rjbaby9786
@rjbaby9786 4 жыл бұрын
Even the best welders have a bad day
@DOWNLOAD_WELD
@DOWNLOAD_WELD 5 жыл бұрын
Olá quasso the procedure heating of rais filling come the o finish
@bittechslow
@bittechslow 6 жыл бұрын
Ha ha"violators will be torched"
@richardwalters1803
@richardwalters1803 6 жыл бұрын
very good work very informative
@sagee425
@sagee425 2 жыл бұрын
So does she like welders or….. 😏
@ElChupa_Cabra
@ElChupa_Cabra 6 жыл бұрын
I just say to myself “ I’ve been welding no problem what’s the difference of welding it now..I got this”
@خليلشاوي
@خليلشاوي 5 жыл бұрын
Thank you man
@NSW
@NSW 6 жыл бұрын
I love welding test.
@aaronfaucett6442
@aaronfaucett6442 6 жыл бұрын
God bless you Jody
@jordanmullenhopkins
@jordanmullenhopkins 6 жыл бұрын
Nice video thank you for this
@Jason.outdoors
@Jason.outdoors 4 жыл бұрын
Shipyard life.
@oreinsinclair2536
@oreinsinclair2536 6 жыл бұрын
great video!
@pipeline_hank5277
@pipeline_hank5277 5 жыл бұрын
Theres a kid in my welding class that punches the walls, work benches, and almost hit me because my teacher told him to try the weld again. Crazy bastard.
@jonathon8856
@jonathon8856 2 жыл бұрын
That's a Boilermaker tube test😏
@MiguelHernandez-rl2vv
@MiguelHernandez-rl2vv 6 жыл бұрын
Podrías hacer un vídeo donde la soldadura sea posición 3f diagonal con 7018 en 1/8 saludos desde Ecatepec México
@ferarreguin6765
@ferarreguin6765 6 жыл бұрын
Miguel Hernandez Mi amigo quieres que te tradusca tu comentario?
@MiguelHernandez-rl2vv
@MiguelHernandez-rl2vv 6 жыл бұрын
fer arreguin si fuera posible, gracias
@patrickgraham3593
@patrickgraham3593 4 жыл бұрын
Trinity shut down every plant that they bought and ruined. Bessemer 93-97
@PANTYEATR1
@PANTYEATR1 6 жыл бұрын
i swear, when i read monster coupon i thought it was huge coupon savings for the weld monger store 😅 shows my inexperience huh...thanks Mr. Jody
TIG Welding 6G Inconel Pipe Made Easy
27:48
Weld.com
Рет қаралды 15 М.
Break Down the Keyhole Tig Welding Technique
13:47
X3M TIG
Рет қаралды 53 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 30 МЛН
Family Love #funny #sigma
00:16
CRAZY GREAPA
Рет қаралды 37 МЛН
How to Weld a 6G TIG Root Hot Pass 7018 Fill and Cap
15:28
Tulsa Welding School
Рет қаралды 146 М.
6g Pipe Welding Test - Tips for Root Pass
14:35
weldingtipsandtricks
Рет қаралды 970 М.
6G Pipe Test 2" TIG
17:16
weldingtipsandtricks
Рет қаралды 81 М.
Master the 6G Monster Coupon Test (Part 1)
30:31
Kentucky Welding Institute
Рет қаралды 962
Busting Fake Internet Welds
10:06
The Fabrication Series
Рет қаралды 8 МЛН
6g Pipe Welding Test Tig Root - 2" Schedule 80 - part1
11:32
weldingtipsandtricks
Рет қаралды 392 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18