Restrictor ring is has to be on top (above) not bottom of groove, also the distance of ring max of 1/2" (12mm) from groove. The ring flange distance out from pipe should be at least 3" if I recall....or was it 6". So no this is not a AWS qualified 6GR
@user-bo6vk7jo4t
Я не вижу ничего сложного, фланец не мешает, абсолютно. Толщина самая лучшая и удобная,вари нехочу
@6lr6ak6
This 6GR test was one l did in 1989, it was a last min decision to have the flange in place, as I'd not practiced with a flange, passed all same.
@hardcoreplayafromthehimala4888
4G 7018 root
@jesserodriguez2769
Did that for 34 years grinding is the hardest.
@bobm1361
So a basic 6g with a flange impedance. This isn’t the hardest. Try the coast guard 2”open butt if you want a real challenge. 😊
@pkplexing21 күн бұрын
That looks like 7016. Not sure why you are whipping it like crazy, but at least its a video from your side of the world using a decent rod.
@miguelhdz7439
And the ring flat is separate 1/2 inch from the bevel no more and root pass is 7018 and gap is 5/32 sometimes 3/16
@user-rv6xl8bw1n
This is not 6 gr.
@josephmariyaraj8931
in my experience 6GR test is not difficult.
@jarnbjorn4522
i remember doing this but the ring was on top and was only allowed 20 mm gap, single bevel at the bottom with schedule 80 and 120 at the top. 6 inch of course
@rubenbarria1557
Muy bueno👏👏!! Gracias por compartir amigo!!
@skitown11
6GR is a single bevel welded directly to the plate, with a root opening
@ForgeGiven
Arc strikes outside of the allowable weld area are an IMMEDIATE FAIL. The weld area is not to exceed 1/16" outside of the bevels.
@user-zl4wl5ke9k
Visual no undercut. YOU EXCELLENT~^^
@michaelshortridge63792 сағат бұрын
6gr Pipe on top is sch 80 no bevel. Pipe on bottom is sch 40. Resrictor ring is 1/2" from pipe. For strucutual
@user-rv6xl8bw1n
The Ring should be on top.....
@user-oh9dh5hs3l21 күн бұрын
I use the ESAB Wires.. which one you use for this?
@gregtipton5347
I'd say that grinder sees a lot of work what a mess
@Juandan59
The restrictor plate should be on the top not the bottom.