6s Rustler 4x4 VXL! - Hobbywing Max 8 Combo 2200kv

In today's video, I upgrade my Rustler 4x4 with a Hobbywing Max 8 combo! It allows the Rustler to run a 6s lipo, which makes it crazy fast. We do some speedruns, bashing, jumps, and more! Enjoy!
Stay updated: / cheeseburgerrc
​
License for the intro music:
Rock Intro 3 by Audionautix audionautix.com
​Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/rock-int...
​Music promoted by Audio Library • Rock Intro 3 - Audiona... ​
​
​
License for the outro music:
Extreme Energy by MusicToday80: / rock-music
Attribution 3.0 Unported (CC BY 3.0)
creativecommon...
Music provided by Free Vibes: goo.gl/NkGhTg
-Subscribe for more videos!
-Have a video idea? Tell me about it in the comments!
-Check out my Instagram: bit.ly/3ef9CS7
​-Check out the channel: bit.ly/2ISOypv

[@wwjoshdew]

3:17 OMG, so glad you included that error. haha YOUR WHOLE CAR is held together by HOT GLUE! omg. I'm dying!

[@brandontravers2194]

???? Hot glue holds better than the stock sticky pads

[@GeddyRC]

Tight editing, no stupid intros, fun and unobtrusive background music to set the mood, and awesome content. Plus I learned a lot. Great video, and subscribed!

[@andreabotti99]

Back in the day I installed the Mamba Monster 6s combo on my slash 4x4, it was a blast but I began to break a lot more parts, especially in the drivetrain, and I've had to upgrade a bunch of stuff. After that I've learned to be satisfied with the stock power and focused my mods on durability and handling

[@CHEESEBURGERRC]

I’ve had to spend at least $2-300 in the past few years on just maintenance and durability upgrades to handle the power. Stock is DEFINITELY easier to work with!

[@_savageasfck_]

Could've just run it on 3s or 4s... 🤷🏻‍♂️

[@TheblueTraxxasRustler]

First video I saw on this channel and I’m already loving the content

[@rcmaniaua2088]

Grate one ! What i like it is the sound of running moror , when car drives on the street ! Sounds cool

[@Rcdude2007]

I put a big block Arrma motor in mine 😂😂😂. Awesome video new sub!!!

[@smashrc8481]

rip diffs, drive shafts, wheel hexes well probably the whole drive line actually lol cant wait!!!!

[@insanerc9585]

Put the receiver box up near the front of the chassis!🤙🤙and put the switch on the servo

[@tysemilicia3931]

Just did this an hour ago haha

[@corottolino953]

Love the intro!!!

[@JCG-049]

I put the same system in my 2wd Slash and it's freaking crazy on 6s it won't stop pulling wheelies and I balded a good set of tires in 6 months flat Update: I got the LCG chassis conversion and the ESC won't fit in its designated spot due to the motor wires being too short, what type of plugs does it use?

[@speedcity462]

Amazing video that also would be insane if you put that stock traxxas motor in the sandy land and also i bet even on that small jump at the park you could get a backflip that thing is powerful. Great video!!!

[@101theog7]

I built my rustler too 6s about 8 months ago thought I was alone in it lol

[@nathan16253]

I have a tip to keep that thing from wheeling over. So I have a Traxxas Rustler 4-wheel drive VXL And what I did Was put a stampede bumper and wheelie bar on it and it's adjustable and way better. Oh and I forgot to mention It doesn't flex around and it keeps the back of the body from getting damaged as severely

[@CHEESEBURGERRC]

I’ll definitely look into that! A solid adjustable wheelie bar would be perfect!

[@jamesplymire5342]

Same here, the Rustler 4x4 wheelie bar and mount are garbage. What you and I did is a huge upgrade.

[@CHEESEBURGERRC]

I ended up getting a Hoss wheelie bar. It’s a WAY better design than the stock one. Better mounted, better at stopping wheelies, stronger, etc. Shame they don’t make them with it!

[@kimmern999]

I'm late to the show, but I came here for the precision gluing.

[@HaynesJP]

Need a shirt that says “about a millimeter” 😂😂😂

[@allmightygreatone1048]

Servo tape two sided. No hot glue

[@CHEESEBURGERRC]

I tried to use that, but the mounting plate didn’t fit right, and the tape wouldn’t stick to the chassis because of the honeycomb shape.

[@michaelsrc3281]

Hey yo that hot glue may not hold but the tray that comes with the max 8 is to screw it o the max 8 and it has to mount it the chassis, you could have mounted it on the front where the holes are.hope it helps!

[@CHEESEBURGERRC]

I hadn’t thought of mounting it on the front! That’s a good idea! I’ll have to see if it fits.

[@michaelsrc3281]

@@CHEESEBURGERRC ok dude hope it helps!👍

[@zerobraincells2629]

wow just wow

[@michaelrowe5896]

you just gave me an idea lmao.. Nice video, huge motorlol

[@SeleverRyan]

Imma run this setup now actually lol

[@Chris-zu8ve]

Have you thought of mounting the ESC just before the shock Tower in the front on that flat section the wires look long enough that would get the air flow into the ESC and motor and balance out better. That's why the wires are long...

[@CHEESEBURGERRC]

I hadn’t thought of that! I’m not sure if it’d fit, but it’s probably pretty close! I’ll take a look.

[@jonahcalkins9335]

Going to want to get a better setup for the batteries or u might have a expensive deal.. id suggest a 6 cell lipo with a y connection for the connection from battery

[@dustin4261]

I Have a Rustler 4x4 fitted with a castle 2200kv, and smashrc is 100% right that your diffs, CVD shafts, and wheel hexes will be shredded pretty soon. When you upgrade your hexes you may then shred the inside of your tire rim.

[@CHEESEBURGERRC]

Yeah. I’ve got some metal shafts and hex’s on the way, and I’m looking into some tougher tires too!

[@coltongilmore1130]

Have you blown your diffs with the castle ?

[@dustin4261]

@@coltongilmore1130 The front diff went out after a few runs with the 2200 Castle. I switched to XO-1 front/rear differentials and it hasn’t been an issue since.

[@ryanflies6915]

Hey it’s me RjRyanYT I got some copyright issues on my other channel so I made this one. Tried finding your Channel to sub again and I finally did lol.

[@somethingrc1545]

I need your stock motor! 😂😂 not really but I am upgrading my rustler 2wd from brushed to brushless

[@andyjones357]

You need to get the tekno big bone drive shaft that stocker causing over heating and is hollow and gets warped I had that happen from all jumping and hard hits

[@ClevelandRips]

Faster!! Nice

[@gregrogers3030]

I would love to see that old motor go it to that 1/18th scale!!!!!

[@MatMabee]

Had my 1/16 slash with the 10 scale vxl back in the day. Insane little car.

[@gasolinediesel972]

I ordered the 2200 motor for my 6s erevo 2.0. Gonna run the stock esc for now.

[@CHEESEBURGERRC]

Nice!

[@chevyboi8392]

i’m doing the same thing! but i have the 2wd rustler it’s crazy, almost uncontrollable

[@CHEESEBURGERRC]

That sounds awesome! The 2wd Rustler is pretty crazy on 3s. I can’t even imagine how crazy it is on 6s!

[@chevyboi8392]

@@CHEESEBURGERRC yeah it ended up destroying the gearbox so i just gave up and bought a vxl so i can actually bash good

[@CHEESEBURGERRC]

Ah. Well the 2wd Rustler is a lot of fun, even bone stock!

[@rcquestions6342]

@@CHEESEBURGERRC what pinion did you use for the motor? I had a few 11tooth but the mesh seems to not line up

[@calebworland967]

@@CHEESEBURGERRC when the 2wd trans goes out its usually the input shaft which is $3. If its the diff its $15 or $30 for a hot racing sealed case. Or get a proline or FLM trans. Just letting you know

[@budmansdragracingchannel2726]

Your just gonna end up breaking everything else with that kind of speed.

[@Bubudude]

Eh hopefully not

[@budmansdragracingchannel2726]

Dude heat is going to make that hot glue come right off I guarantee it.

[@Bacon12954]

How do you have the pinion/spur set up? I'd think in a truck that small it would be almost impossible to prevent spur and pinion failures on 6s.

[@CHEESEBURGERRC]

I’ve adjusted enough gear meshes that I’m able to sort of just eyeball it. The gears should be as close as possible while still having enough play that you can click them back and forth a bit. Some people use the “paper trick” where you put a piece of paper between the gears and press them together to get the right distance. I’ve found that it generally gives them a tiny bit too much space, but it’s a good starting point. I also tightened the bolt down like crazy to keep it from moving.

[@Anton-gz1go]

Nice video! Your editing skills are very good and you have a lot of creativity! I think you will be a very successful youtuber one day

[@CHEESEBURGERRC]

Thanks! 😀

[@Daytona89]

Nice upgrade. Do you use still the same pinion gear distance adapter like stock?

[@CHEESEBURGERRC]

I tried, but I found some gear mesh issues so I just set it by hand. I geared it up later, so I can’t use the mesh adapter anymore anyway.

[@SeleverRyan]

Is the drivetrain really bad as people say it is? I don’t think so but u had it longer than me so idk

[@CHEESEBURGERRC]

Not for me! I’ve owned it for almost 2 years, and I’ve abused it almost daily, but I’ve only ever broken 3 driveshafts. I briefly had an issue with spur gears shearing, but I discovered that it was because I had killed a motor bearing. Once I fixed it, it was good as new! I would guess that if you do tons of hard jumps on concrete, you’d probably break a lot more, but generally I think most stories of it breaking a ton are greatly exaggerated for a warranty claim.

[@SeleverRyan]

Wow ok thanks!

[@gideondroog1990]

Hi! How did you modified the velcro to use two 3s lipo's? With glue?😅 Is there a way to modify the velcro without using velcro?

[@CHEESEBURGERRC]

I’ve got the Velcro glued into the car, and then it loops around the batteries to hold them in. If you wanted it more secure, you could consider drilling into the chassis and screwing the velcro down (being careful to not scratch the batteries with the screw sticking out). I can’t really think of another way to get 2 batteries into the factory spot. The stock battery hold down won’t fit over them. I suppose you could 3D print an extension, but velcro is definitely cheaper and stronger.

[@gideondroog1990]

@@CHEESEBURGERRC Thanks! Making a speedrunner of the rustler 4x4😁 good advice, I really appreciate that 💪

[@danielanderson5326]

It's going to be a challenge shoehorning that motor into the Sandyland. You can easily mount the motor with a WLtoys A979b motor mount, but I believe the motor will be too close to the center drive shaft because the gears are too small.

[@CHEESEBURGERRC]

I've actually been looking into some Wltoys cars for a little while now! I think that might be the way to go!

[@danielanderson5326]

I'm getting frustrated with 1/18 scale cars. They break a lot and they're hard to control. My latest car is a WLtoys 124019. It's 1/12 scale and would fit your Traxxas motor quite nicely. KZbin it.

[@danielanderson5326]

kzbin.info/www/bejne/a3nGon2Ma8l0d68

[@CHEESEBURGERRC]

@@danielanderson5326 Haha looks like a monster! Looks like I have a new project for this summer!

[@danielanderson5326]

How about something like this for a next project? 😆😆😆 kzbin.info/www/bejne/pJK8lIOajbCdhpI

[@chsansil]

Nice video!, i´d like to see what speed it reaches by installing this kit on a Losi Tenacity for example or on the ZD Racing Thunder, it must be crazy...

[@peenutbuttterbiscuit277]

Could you possibly show how to do 6s in the rustler 2wd

[@jens9660]

thx for the tip

[@SeleverRyan]

What’s better max ten or max 8? I run one on my slash but Imma get a new one for my rustler 4x4

[@CHEESEBURGERRC]

The Max 10 is for a 1/10 scale, and the Max 8 if for a 1/8 scale. So the Max 8 is bigger, faster, more powerful and just better in general.

[@SeleverRyan]

Is the rustler 1/10?

[@CHEESEBURGERRC]

@@SeleverRyan Yes. So a 1/8 scale motor gives a lot more power than it needs, which is a ton of fun!

[@SeleverRyan]

Awesome imma run this setup, this video was very entertaining!

[@ryanflies6915]

Ok thanks guys.

[@mrmann8865]

If I change my motor and ESC like you did, how do I bind the Traxxas remote to the new Spectrum Firm ESC? For some reason it isn't working? It won't allow me to calibrate it either?

[@CHEESEBURGERRC]

You have to be sure that it’s plugged into the right spots. The esc should be plugged into channel 1 I believe. If you accidentally put it in the wrong one, it won’t work.

[@mrmann8865]

@@CHEESEBURGERRC You were exactly right man! I had the plugs in backwards which is why it wasn't working. Thanks for your quick response. Will be subscribing.

[@esterdautzenberg7397]

can i instal it with the light kid or can i only chose the faster optoin or light kid?

[@CHEESEBURGERRC]

What do you mean by light kid?

[@plot5975]

Hey, I don’t know if you still read these comments, but what pinion did you use? Thanks!

[@CHEESEBURGERRC]

In this video, I was using an 11t pinion. (Stock ratio.) I found that it was under geared though, and have swapped it for a 13t gear with big tires.

[@pauldiamond3253]

Holy crap, that is insane power for your traxxas. Will it handle the power?

[@CHEESEBURGERRC]

So far it has!

[@sebbbou5455]

@@CHEESEBURGERRC you have already upgraded the axle? If yes which ones? Great vids

[@CHEESEBURGERRC]

I have! I’m running GPMs.

[@MrClubmateRC]

hi, i have the same system. i have problems with the main gear. it melts. is it better with the center diff?

[@CHEESEBURGERRC]

Yes! It is much better. It doesn’t shear or melt anymore.

[@MrClubmateRC]

@@CHEESEBURGERRC OK nice. do You have other problems with the combo?

[@CHEESEBURGERRC]

I haven’t had it for long enough to see too many effects, but it does blow tires and destroy driveshafts, so you’ll want to upgrade those.

[@MrClubmateRC]

@@CHEESEBURGERRC Ok, Thx for the answer. :-)

[@ronnyweinreich]

did the TSM working with the new ESC?

[@CHEESEBURGERRC]

Yes!

[@trenthollifield6969]

I have had the 4x4 rustler since the day it was released I have spent well over $1000 on up grades drive shafts are the weakest parts and it would be faster with a 21 tooth pinion gear and 50 spur gear

[@tysemilicia3931]

Does that fit? I just hooked up a max8 g2 to mine and the only gearing that fit was 25 50(that I had available) and I need to gear down cause it is way overpowered, I have yet to hit max throttle and it goes like 60 at 75%

[@esterdautzenberg7397]

its all leds for on the rustler but i dont know if i can use bothe at the same time

[@CHEESEBURGERRC]

Leds? Are you looking at a light kit?

[@plot5975]

One more question, Do I need to get a upgraded slipper clutch because I got the same motor, pinion etc as you and when i would try to drive it, it would grind the slipper clutch and today when driving it for the first time, it stripped the slipper clutch. If you didn't get a upgrade for the slipper clutch could you send me a link to the pinion you got and if you need a upgrade on the slipper clutch, could you send me a link to that one? Thanks!

[@CHEESEBURGERRC]

By “grinding the slipper clutch” do you mean the gear is stripping? Or are the clutch pads wearing out? If the gear is stripping, it means you probably have a bad mesh. The fixed mesh adapter has some problems, and I had a bit of shearing with mine too. If you set the mesh manually and make sure all the screws are tight, that should fix it! If the pads are wearing out, it probably means the clutch is too loose. From the factory, it’s meant for a 3s system, so you’ll definitely want to tighten it down for 6s. I would definitely recommend upgrading it to a center diff soon though. The slipper clutch and the plastic spur gears are definitely not meant for 6s. I use the Traxxas center diff, and it’s much tougher than the slipper clutch. If you’re shearing teeth on the gear under regular driving conditions though, definitely fix that first. Installing a tougher center diff will fix it temporarily, but the problem will still be there, and will only get worse. I hope this helps!

[@brandontravers2194]

I got the same truck.with mamba 2200kv about same size as your upgrade motor but my pinion gear is bigger esc set up for 6s but its tight and grinds so bad with plastic spur what spur gear will my erevo.spur work

[@CHEESEBURGERRC]

If the gears are grinding, it’s probably a bad mesh. Upgrading the gear won’t help that, and can even make it worse because it’ll damage the motor instead of the gear! I’d recommend adjusting your mesh first before upgrading your spur.

[@dittydumdum6667]

Will be more awesome if u did a upgrade on a redcat blackout xte brushed or the brushless redcat blackout xte n upgraded more

[@kamillbadell3244]

Would the hobby wing max 10 be the same to install

[@CHEESEBURGERRC]

Yes! The max 10 is smaller than the max 8, so it would probably actually be easier because it would fit better.

[@robeswin]

What suze was the pinion for the hobbywing. 5mm and is it a .8 module? What exactly was it and where from lol

[@CHEESEBURGERRC]

Yes a 5mm bore and 0.8 pitch. I got mine from Hobbytown. I’ll find you a link to the exact one next time I get a chance!

[@robeswin]

I got one of the same from Robinson racing 12T. How did the glue gun lol hold up under the esc and was that the only idea u came up for it. I’m wondering if I can buy the carbon fiber tray for the hw esc and if the motor will still fit. I’m doing the same exact set up but I want it done right haha

[@CHEESEBURGERRC]

2 years later the hot glue is still holding strong! I think my 12t may actually be a Robinson racing one but I’d have to check. It definitely sounds familiar!

[@CHEESEBURGERRC]

But yeah you could definitely rig up a tray if you really wanted to. You’d probably have to drill some new holes though because the stock ones will likely be too close.

[@robeswin]

@@CHEESEBURGERRC so does the motor overlap the esc holes?

[@jonahcalkins9335]

Metal drive shaft is good but id rather have a plastic one to twist an give out before the front or rear differential which takes more time to replace or fix an money.. drive shafts to the differential cheap just personal opinion

[@bradybaker9163]

I got a sandy land a couple months ago and I am wondering what you think the best upgrade you did was and what I should do

[@CHEESEBURGERRC]

Ooh that’s a hard one... I’d say probably the best one for me was the bearings because it makes the car way faster, but I don’t know for sure how much of a difference bearings would make with the stock motor. The Latrax Teton tires definitely make a big difference in grip compared to stock (for general and off road bashing. They’re not as fast as the street tires), so those are good too. I’d say get the bearings and tires, and try to get a brushless system later on.

[@bradybaker9163]

@@CHEESEBURGERRC thanks I will definitely get the bearings and I drive it in the grass a lot so maybe not the tires

[@palean999]

Beefing up as in using Flex Tape instead of glue.

[@BLACKHART_]

How fast does it go on stock gearing? In a speed run I mean

[@CHEESEBURGERRC]

The best I’ve done is 55 on the setup shown in this video. That was on a fairly short stretch of wet pavement though, so you could probably get a few mph more if you have a good place to do it!

[@BLACKHART_]

@@CHEESEBURGERRC youre a legend and thanks for the fast reaction

[@sebbbou5455]

How is it hard on the differentials and all others components?

[@CHEESEBURGERRC]

So far, it’s holding up great! I would guess that parts will wear out a bit faster, but only time will tell.

[@sebbbou5455]

@@CHEESEBURGERRC im planning to go 4s... but its interesting to know someone a bit crazy run in 6s!! 😎

[@CHEESEBURGERRC]

Awesome! 4s seems like a lot of fun!

[@sebbbou5455]

@@CHEESEBURGERRC hi again so do you have more bad Or good experiences with the combo after that time? It seem to be a bit too much in 6s but this combo on 4s with the Rustler could be really interesting…

[@CHEESEBURGERRC]

Hi! I’ve had a mostly good experience with it. Not surprisingly, I’ve had to replace the tires, driveshafts, and the slipper clutch with tougher parts. I’ve also had to upgrade some other parts like wheel carriers so they’d survive the harder crashes. I suspect you’d probably have to do the same stuff with a 4s combo, so you may as well go for 6s if you want it!

[@KB0L]

Hey could you send me all of the upgrades that u have done? I wanna upgrade my rustler 4x4 too

[@CHEESEBURGERRC]

Sure! Do you mean the parts for this video or all of my upgrades? I’ll reply again soon with them. I’ve got to find the names and links lol

[@KB0L]

@@CHEESEBURGERRC yes. My rustler is completly stock i didnt buy the vxl i have the normal one so i wanna make it faster now :)

[@hubiw14]

what gearing you thinking youl go?

[@CHEESEBURGERRC]

In theory, I could go 17t and still have a ton of torque, but that might be a bit overkill. I might go 14t, but I’m thinking I’ll instead just give it some big tires.

[@coltongilmore1130]

Do you know what size bore pinion you need is it 8mm?

[@CHEESEBURGERRC]

It’s a 5mm bore.

[@robsilv148]

What size pinion gear did you use

[@CHEESEBURGERRC]

11 tooth. It can easily go higher though! I'm gonna gear it up very soon!

[@BatmanRcRider]

WTF 😳

[@har_phn]

What store u buy these things ?

[@CHEESEBURGERRC]

I got mine at my hobby shop. They also sell them online!

[@zachspear5726]

Can you send me a link to the gear that you bought? Plz

[@CHEESEBURGERRC]

Sure! I got mine at my hobby shop, but I’m pretty sure this is the link: www.hobbytown.com/robinson-racing-extra-hard-steel-mod1-pinion-gear-w-5mm-bore-11t-rrp1211/p454463?v=25017

[@zachspear5726]

@@CHEESEBURGERRC thanks I got it ordered

[@CHEESEBURGERRC]

@@zachspear5726 awesome!

[@DontDodgeIt...RamIt...Dammit.]

Thinking about giving this a try. Not for the speed, but looking to be able to run 3-4S without overheating like it does. Stock VXL3 is getting too hot on a 3S.

[@CHEESEBURGERRC]

That’s definitely a good idea! The vxl 3s system is pretty high in Kv and gearing, and a bigger motor would definitely help.

[@bryanmiller476]

Both my wife and son have rustler 4x4s with max 10 4000kv combos and they also run 4s and using a Maxx heat sink cut to fit the motor and they never overheat

[@DontDodgeIt...RamIt...Dammit.]

Cheeseburger RC and Bryan Miller, thanks for the info definitely going to give it a try now. I've had it up to 78 mph, but that's when I can watch the temp gauge on a steady climb.

[@maszkalman3676]

you know fan and heatsink solve that problem....

[@DontDodgeIt...RamIt...Dammit.]

@@maszkalman3676 I've tried that. Have them on the motor and the ESC. Keeps them a little cooler but depending on the outside temperature here they still get hot. I like running these trucks so much, I run them year round when I have time.

[@Grey-Troll]

Eww, hot glue? For SHAME.... FOR SHAME!! Lol naa, I have used probably half an 18 wheeler full of hot glue on projects, and it certainly is quick and easy if you're in a hurry. For this though I'd drill a couple small holes and use some small bolts and nuts with a little layer of RTV through the hole and around the bolt head and nut, don't tighten it all the way until the RTV cures a bit to keep pressure from squeezing it out and creating more points for potential leaks.

[@CHEESEBURGERRC]

I hadn’t thought of that. I’ll have to give it a try once the hot glue fails! (It’s definitely getting close - very wiggly.) Thanks for the tip!

[@luisestrella45]

Sandy land has no chance

[@CHEESEBURGERRC]

Lol we probably won’t run the Rustler on 6s for that😂

[@nickwilliams6869]

What scale is that

[@CHEESEBURGERRC]

1/10 scale car with a 1/8 scale motor

[@wallythacker7772]

Old vid but I just watched. Turn your TSM down bro. That’s why you’re getting the tank slapper at speed.

[@illegalalienband7122]

What was your top speed???

[@CHEESEBURGERRC]

On this setup, my top speed was 51 on wet pavement. Since making this though, I’ve geared it up and given it bigger tires, so the new speed is probably even more!

[@smnkm4ehfer]

Great combo, but ya, severely undergeared

[@terryfrome1641]

Hot glue, are you just doing circles in the driveway. No way will that stay if your bashing it. You need to adjust your gearing to compensate for the kv and voltage differences. It looks slower than stock in your video except it has loads more torque

[@CHEESEBURGERRC]

You’re right! It was not at all efficient in this video. Since making it, I’ve geared it up, added bigger tires, and given it metal driveshafts. Now it works great!

[@tristanrush2855]

Same

[@quincyperkins7314]

Can I have the vxl motor and ESC

[@kaylanwoytas4744]

Bigger tires will make it slower

[@CHEESEBURGERRC]

In some cases yes, but not here. It basically acts like gearing the car up, so with the stock motor, it might get overloaded which would make it slower, but with the upgraded motor, it makes it into a rocket!

[@mikeherzog3194]

Hot glue omg

[@bkfracing8025]

hey check mine out the best rusty 4x4 6s big tires

[@CHEESEBURGERRC]

That looks pretty nice! You may want some new driveshafts if you’re running belted tires! Also, is that a 6s 2wd rustler I see? Because that thing will be nuts!

[@bkfracing8025]

Yes sir it is I upgraded the 4x4 to the Rpm shafts they work perfect plus there thick and tuff and thanks

[@MatMabee]

Bro uses a whole bottle of tire glue per wheel and buys hot glue by the crates. Please use double sided tape and some proper adhesive or I'll call the authorities for toy abuse.

[@luisestrella45]

Hi

[@CHEESEBURGERRC]

Hello!

[@LyroLife]

Motor is 4274

[@michaeldean8569]

VERY jealous of your curbs.... Mine will destroy any sized RC

[@peenutbuttterbiscuit277]

Nvm

[@MarkReid-lb1iw]

Try cleaning it first b4 vid.

[@rcnitroburningmadness7073]

send it lol

[@CHEESEBURGERRC]

Haha very soon!

[@michaelfaria4160]

🤯🤮