Engine and trans insulation from the ground to in the mounts uninterrupted Hope y’all enjoy BlindGuysGarage@gmail.com
Пікірлер: 30
@JoseLopez-uu1hu2 жыл бұрын
Great video keep them coming 👍
@blindguysgarage2 жыл бұрын
Thank you
@lueecam9320 Жыл бұрын
What kind of transmission cooler lines did you use? Any issues with the lines or fittings clearing the tunnel? Thanks! P.s. really enjoy your videos! 👍
@blindguysgarage Жыл бұрын
Thank you very much and thank you for watching as for trans lines I made my own with 6AN limes. It was a little tight I used 6an to 1/4 NPT fitting in the case of the trans I also use the same fittings in the radiators. I think I ised 1 45 and 1 straight an then a universal 6 AM line kit I will post a few links in just a second
I hope this helps its not really the cheapest way but it’s clean and looks nice
@xrando72142 жыл бұрын
“Alrighty”
@blindguysgarage2 жыл бұрын
This is a slow one but
@joeblack3017Ай бұрын
Did you use the stock trans cross member
@blindguysgarageАй бұрын
Yes, we did
@chrisyoung35422 жыл бұрын
Alright!!!!
@blindguysgarage2 жыл бұрын
Thank you
@AustinChavez-ic7rl9 ай бұрын
How was the hood clearance with intake.
@blindguysgarage9 ай бұрын
It fit perfect
@reneekrueger9622 жыл бұрын
Is that oil pan going to clear the steering at full lock? Pan looks pretty thick up front.
@blindguysgarage2 жыл бұрын
It cleared just fine I was surprised as wells
@davy14582 жыл бұрын
Where did you drill the 2inch hole in your firewall for the ls swap harness? And where did you mount your pcm?
@blindguysgarage2 жыл бұрын
We still have not put a hole in firewall becouse we need to install the AC in the car I think it will be drilled on the far passenger side close to blower motor as for where I mounted the Computer I put it on top of the glove box
@blindguysgarage2 жыл бұрын
If the car had factery hear or ac still I would have probably put it above the heater core like my 67 Camaro but not sure
@warynpaige6190 Жыл бұрын
What motor mounts and crossmember did you use?
@blindguysgarage Жыл бұрын
I used stick mounts and ls adaptors plates here is a link to the a vid I did on ls swapping a 70 chevelle ever part that is important is listed in the discription
@blindguysgarage Жыл бұрын
what’s needed to LS swap a 70 Chevelle also for sale $22k 68-72 chevelle El Camino kzbin.info/www/bejne/aaKVn5uspN2bias
@ryanr2003 Жыл бұрын
Is that a 1 ton or 2 ton hoist?
@blindguysgarage Жыл бұрын
It is a 2 ton but under full extension according to the side of the hoist it’s only good for 1/2 ton
@tylerseabook94238 ай бұрын
This was painful. Was hoping for good info. Just one camera angle and 12 minutes of nothing