£70 TEMU BASSBOX BUILD USING FREE WOOD!! AMAZING OUTPUT!

[@f4ll3nzr0]

A literal field test, fantastic!

[@whatcher8151]

throw them in the creek and you'll have Field and Stream. Real streaming stream music. Play Creedence Clearwater Revival - Have You Ever Seen The Rain. kzbin.info/www/bejne/nWXJnXSQesynoNU

[@PacmanBasshead]

@whatcher8151 bro i heard you liked streams, so i streamed on your stream whilst streaming a stream. X gon give it to ya.

[@DubHead69420]

@@PacmanBasshead xD

[@vibez_kru01]

@@PacmanBasshead😂 you crack me up!! 👍🏾👍🏾 Wicked video btw!! 😂 Great idea to put some of this Temu stuff to the test! Keep up the good work!! 😎👊🏾

[@PacmanBasshead]

@vibez_kru01 Thanks man, jist ordered a bunch of stuff from Aliexpress on a very similar budget to go head to head!

[@SwishaMane420]

tweeters should be towards the outside to create wider stereo imaging

[@PacmanBasshead]

Good point! But this is for a garden/field rather than a room or a car so any chance of a stereo image is minimal anyway.

[@keatoncreates]

not only that, when that close together high frequencies will cancel each other out and interact negatively! worth considering in future its free performance =) Either way, these speakers were better than expected hahaha

[@PacmanBasshead]

@keatonjones6115 ive just ordered the parts to a similar value from ali express to compare products from the sites. Ill try to remember your comments, but ive got the memory of a baked potato so no promises 😆

[@childishtombino1275]

@@keatoncreates You'd be better off having them closer than farther. If they're close, the frequencies that interact are higher, if they were farther, the frequencies interacting would be lower (mids/crossover point) which would be more noticeable to our ears. Ideally you have waveguides that stop the interaction on the whole. But this is just a temu speaker lol

[@steveschwartz9771]

Well, 6.5" or 2M is the golden rule. On this unit, inconsequential.

[@TRONMAGNUM2099]

I saw the Parker the Basshead video and thought the speakers were bad. Now after seeing them in a proper box with a decent amp I think they sound ok. Perfect setup for a workshop or in the backyard. Just subbed!

[@AsteroidLuckIsReal]

Yeah I saw his video also. He's been doing videos for years but he still doesn't really understand audio. I still can't believe deaf bonce sponsors him.

[@PacmanBasshead]

Thanks for the kind words man, really appreciate it! Thankyou for the sub ❤

[@PacmanBasshead]

You are welcome man!

[@DerBoss-hr3ts]

This isnt a proper box. U cannot build a speakee box without TLS parameters like Vas, Fs and so on. As example: The airpressure of the subwoofer makes the mid speakers behave like a passive radiator cuz theyre in the same housing ._. Completly destroys the whole potential..Better buy some 50 bucks pioneer car speakers, put them in a 15litre enclosure and have fun.

[@xmarksthespotmusicchannel5009]

@@PacmanBasshead would you maybe give the parts list? like the speakers, tweeter and the good amp? i have some scrap wood and this would really be useful for a backyard cook out

[@TheJester2471]

8:50 "this amp, like most car shows, is full of knobs" awesome!🤣

[@PacmanBasshead]

Haha. Was i wrong?!

[@romper6698]

@@PacmanBasshead Ive already subbed, but would sub twice if I could just for this line! Edit: errr... the carshow quip, not the "was I wrong line"...

[@Eli-eb3xs]

I love the way this guy plays around, I saw pretty much of KZbinrs into speaker tech like this, but I sub to this guy because of his sense of humor 😅

[@wr2956]

What a great project! I haven’t read all the comments but if there’s one thing I would strongly recommend, it would be to add a 6s balance board to the lithium battery pack, if you don’t keep those cells properly balanced you will find out that they contain an angry fire inside and very bad things could happen. You need to be very careful with lithium batteries mate, keep yourself and your property safe, look at a few videos of lithium battery fires to see how bad they can be

[@tonymcclendon-hobbytime7727]

I agree. He need a battery management system. (BMS)

[@ileckthammathai5381]

I've always wanted to get into building my own box for subwoofers. I just can't find any good tutorials. Your videos are super entertaining, and I hope to see some in-depth box building tutorials from you. Keep up the great videos. Can't wait to see your subscriber count rise.

[@PacmanBasshead]

Thankyou mate that's such a nice comment, I work off feedback on what to do next so thats super helpful!

[@Badasscarstereo]

It's great when you reuse things to make something nice out of it! You are knowledgeable but a little crazy, I love that! 🔥😎

[@mitsibeaver]

😂 the field clip was awesome, definitely shows ya how good it actually is for the price point and quality of sound. Great job 👍🏻

[@freakymaxdesignpro]

Just found you from your previous temu vid where you bought these speakers and such and tested them. I enjoyed that and subbed immediately. As soon as I saw this video out I watched immediately. Good videos and can't wait for whatever you make next.

[@PeterJeffcock]

This video is sound and good info, one thing that will make it even louder is segregating the speakers with sheets of wood inside of the box then hear the difference instantly Keep up the videos

[@glanda7862]

I have the same amplifier board which didn't work for you, but it does an amazing job for me. Maybe you misunderstood the left two knobs. They are for gain, not for volume control. In my speaker system I only have to turn them up 1/3 to 1/2 of the way for a 2V RMS audio input. The right one next to the audio jack can be turned up fully. The amplifier IC this board has are excellent, I know that because I've designed custom PCBs with it and know all the technical details about it. The only issue the board has for me that it doesn't mute the speakers while the power supply is stabilzing, so there is a loud bang coming from it when plugging it in.

[@ShookieJay]

Stumbled across the vid where you unboxed the speakers and bench tested them. Immediately subbed and was looking forward to the follow-up. You did not disappoint! I'm actually shocked that Temu junk sounds as good as it does. Can't wait to see what other projects you have planned for the future!

[@ijahtom]

!! Lol Love the Intro greetings Just Like in the very very old days when the 1st Bankers ever greeted a customer entering the building in those days 😂

[@quinproc]

Very cool project! It would be cool if u can give me the links for the parts!

[@kevinkelly208]

The 6” measuring tape got you a sub 😂😂

[@PacmanBasshead]

That was a generous 6 inches too. More like 9. It was cold.

[@Terry-hb6wc]

You could use calk or silicon to seal any leaks from the inside, works lovely

[@PacmanBasshead]

@@Terry-hb6wc the idea was that this was as free as possible, but i agree, i usually use silicone 😊

[@strichcodekind]

the manliest start for a video on earth

[@PacmanBasshead]

Ill draw a moustache on and have a cigar next time to make it manlier!

[@1117coolman]

It actually came out really great, i usually expected for the temu speakers to sound bad, but it was the total opposite. As i asked in earlier video, please try building a wall with cheap subs, and see how it ends up. Maybe 150db haha :D

[@PacmanBasshead]

Haha, if only! A wall is a LOT of work, and id need a whole spare car for it so, maybe once youtube can pay for me too buy a car and 2 weeks off work, all the cables, gear too etc hahaha.

[@soundblaster2291]

Nice but should have mounted the mids lower in order to put tweeters on top of each for better stereo imaging 😊

[@andrewfrancis2581]

Great vid, love the gags too.

[@PacmanBasshead]

Gotta get em where you can!

[@somerandomguyfromthestreet464]

Just found you. Golden channel. I also had the idea of using pallet planks to create speakers enclosures, it isn't that bad of an idea. They are dense and still better than most modern speakers built by most brands like Sony.

[@PacmanBasshead]

Its not easy! They warp and all sorts the but the result stained looks great!

[@M3G4UK]

Would love to see more of these projects. Fantastic videos! Have subbed 😊 I have lots of random speaker drivers and similar amps with the intention of one day doing something similar to what you've done. Good to know it can pay off!

[@PacmanBasshead]

Hell yeah it can! Do it! So many people want to do a build like this and you just have to dive in!

[@patricklim909]

Not a lot of people thought about connecting small setup to big speakers. For me I just used old Boston speakers. Sounds outstanding.

[@Munakas-wq3gp]

Most people have it backwards, they think that big speakers need big amps when it's the opposite in reality.

[@ThumbFunker]

Great, will have to give it a go. thanks for the inspirational insights & lighthearted construction process.😅

[@OliversTechFan]

In the previous part i was pretty disappointed that you didnt build a box for it, but now that you did this is going to be an interesting video

[@tonymcclendon-hobbytime7727]

Nice build. sound great on this end. Try building your box next time with the mid range speakers and the sub speaker with their own divided chambers. that way the pumping of the speakers dont interfere with each other. the box you built should have been separated by 3 chambers. Did you noticed that when the sub woofer pumped bass out, the 2 mid range speakers sucked in. they were over powered by the woofer.

[@remiandrewerner6372]

he mentioned that around 4min I think

[@Random_4400]

Love your sense of humor haha, great build that amp indeed really did transform the speaker, but i knew the temu amp wasn't going to be great to begin with as i personally have a lot of experience with these mini board amps from buying a ton over the years.

[@PacmanBasshead]

Oh really? Would you recommend any?

[@ultimateearrapechannel31]

@@PacmanBasshead one thing to note, to improve sound quality and reduce noise i recommend to put the volume of the amp up, like near halfway, and keep your phones volume lower, the difference is quite noticeable. not that your phones volume cant be at max but its better to keep the volume of the amp itself between 1/3th and above

[@franshaan7388]

Yes mate! Good video again! I have made a couple wireless boxes as well. But allways with 6x9". They give ( sealed ) decent bass. Did both with amplifier and also with headunit. But back then allways with a agm batterie which sucked because of the weight. Maybe time for a new build with lithium!

[@BrianKeith2006]

I’m going to sound crazy but around the 11:35 mark while he turns his head at the right direction it looks like the sun light can be seen through a hole in the middle of his ear.

[@doriangibson8108]

I was nearly in tears when he began whacking the sanding machine🤣.

[@MrHudyedd]

If You use a soundproofing mat, you should get better sound. People use it on car audio system.

[@Phildoh]

Amazing how an amp can make cheap speakers sound decent! Look forward to future videos in this realm!

[@PacmanBasshead]

Many more to come my friend!

[@ebenotek621]

I know the amplifier. It's the best in TPA mode because of thick wire selfs on output! I've short analyse your components. 18L for the sub. 4L for mediums. Close not bass reflex! Build your project with anything other as your under quality wood... I'm not easy with english but good with compact 2.1 systems! My first in 1994... I share and it's a pleasure! My best from France.

[@MArk-yn4sp]

Great vid. Tx. Please consider a review on car (sub+amp) combos. And test it in your car - some reviews are downright awful, but some products are amazing!

[@scoobyblu5815]

I love the fact you got no idea about audio but having such a great go it's very entertaining 🎉❤

[@PacmanBasshead]

I have quite a lot of an idea about audio, been doing it for 13 years, this is not an example of how to show knowledge lol.

[@TheRealVirgilW]

Sounds good. Now you've inspired me to become a mad scientist 😂

[@PacmanBasshead]

Wear eye protection, but film the explosions!

[@nicholasroach9358]

A great little video mate!!! BUT! is that a hole through the main cartilage of your right ear???

[@PacmanBasshead]

Yes, yes it is!

[@johnmathewconradie5520]

Hi good day. Love what you did. What the products names that you ordered would like to try it myself

[@scooter20king]

I’m actually very impressed after stumbling across you channel by mistake why don’t you use your 18v power tool batteries instead of that bank much easier to change and change

[@1974UTuber]

You sir have earned my respect, AND..... My subscription to your fine channel of light entertainment.

[@PacmanBasshead]

Much appreciated, plenty more to come!

[@jimmyakhtar3851]

Hi i like you build ,just one question is this all just one enclosure and is there any port holes with tubes in the back ,

[@JasonS-n5n]

Make another with the 640watt 2.1ch bt amp. I use it. I'm pushing 2 12" Subs + 1 4" midrange and a 3.5" bullet tweeter with crossover. It is powerful. I shake houses down the street on both sides of me but u need to supply the 38-42volts DC to get the 640watts without distortion at hi volumes. I liked the video man.

[@paulwisdom5383]

Did you end up trying to seperate the air space inside or did you admit defeat and punish the mids? Also, that subs kinda cool. It'd make a pretty solid contender for a midbass driver in a budget 3 way!

[@theSWBFman]

You should look into adding a port to the speaker! Porting it gives the sub so much more performance. If you want to keep it airtight, passive radiator is also an option. Porting is pretty much essential

[@Saurosapius]

Where'd you get the good amp? I have a similar project and could use it well. thanks for the nice video!

[@jackturtle131]

G'day mate. Love your clips. Any chance you can build a pair of open baffle speakers maybe with some Temu products Cheers

[@PacmanBasshead]

G'day, are you from Aus? I would happily. However reproducing the effects of an open baffle through youtube would be a nightmare, you also need enough space (+ 1m from a wall) for open baffle to work properly. Id love to experiment but I dont have the space to do it justice yet

[@canal30seg]

These projects are so satisfying!

[@TheBudgie29]

With the second amp In, It definitely would rock the block. You should have bought the mids down a bit, then put the tweeters further apart, at the top. This would have gave You a more wider sound field. If you are looking for quality free wood. Then you need to find the local Charity warehouse. As they throw out lots of Tables, wardrobes, things like that at the back. Nice build though.

[@PacmanBasshead]

Thankyou! I have often considered using furniture to do a build!

[@lsdleighssilverdesigns8809]

Out of the 2x2" sized prices of wood from the pallets, you can make some handles on the top or side for transporting it. Just make finger grooves, and you're set! Spray ot with rhino-liner (truck bed liner) and you could potentially sell those rigs, lol

[@PacmanBasshead]

We saw someone at a show selling similar for 400 last year and i said to myself i can do that for less then 100, this was proof of concept haha

[@JoeDoig]

Why do you have a hole in the concha of your right ear? Does it affect your hearing when you plug it up? Great video and build!

[@PacmanBasshead]

GREAT question, in a nutshell, yes! The super high frequencies (over 15khz) are noticably quieter in my right ear, but the human brain is so stupidly clever that unless i specifically test for it, it levels out between my two channels anyway. No one's ever asked me that!

[@MrKazukstan]

Great video dude! That thing actually kinda slaps

[@CosmicSquidly]

I've been wanting to do something like this for a long time. Maybe soon I'll have to get it done. I want to incorporate a mechless car stereo into my one

[@atecca]

Everything you ever wanted an audio reviewer to do , Adam has it all

[@PacmanBasshead]

Thanks man! Massively appreciate that!

[@weezydeezy9854]

You're quite a charismatic bloke. Stay creative and you'll have one hell of a channel before you know it.

[@PacmanBasshead]

Holy shit man you really made me smile there, thankyou!

[@samd3231]

Excès excellent et intéressant ce qui serait bien c'est d'avoir un lien pour l'ampli que vous avez mis en dernier car il a l'air vraiment bien il améliore beaucoup les tweeters car au début c'était insupportable MDR continuer comme ça Very excellent and interesting what would be good is to have a link for the amp that you put last because it looks really good it improves the tweeters a lot because at the beginning it was unbearable LOL keep going like that

[@PacmanBasshead]

Heya. Its the aiyima tpa3116 amp! Its on aliexpress and temu

[@jeyanthgoringe600]

I have that 2nd amp you used and it’s actually insane for the price. I have them on a set of custom studio monitors and a sub which is a 12” JBL pro series in a custom box and it shakes the whole damn house.

[@PacmanBasshead]

Mate they are unreal!! I might buy 4 and see if i can link them.

[@mister_dzija4161]

You got the link or something, so I can order it?

[@mikejensen6172]

The headbump on the table made me follow you... so Hello Adam :D

[@PacmanBasshead]

Hello mike jensen! Welcome, and thankyou for joining 😊

[@alfaholic3]

It's a cool boom box. It would have been nice to see the frequency response graph

[@PacmanBasshead]

So, this is actually something im working on, i have a dats v3 now and will be building a box for my partners Miata.

[@mcjdubpower]

Gud vid, i have built a box with 2 subs, for £13.00, all the components have been found, scavenged or donated, it was painted at the same time i was decorating the spare room, to save even more cost, 2 old speakers cabs, modded and stuck together.

[@PacmanBasshead]

Absolute hero, im finding more and more people are doing this and i f**king love it.

[@mcjdubpower]

@@PacmanBasshead I'm now eyeing up the old mission 771e speakers hmmm 🤔, thanks for the response bud 💪👌😀

[@PacmanBasshead]

@mcjdubpower if you start drawing what you want to build, youll build it. Pick up the pencil ✏️

[@AllDayBlazer89]

Good effort, bruv. Gotta build me one now! Subbed, good stuff, mate!

[@lupuradu]

great work man! I'm sure it sounds a lot better than the Dynasonic Boombox i've got for 120 euros worth (2 x 4" woofers only).

[@PacmanBasshead]

Give it a go man!

[@henkneijer77]

you should put some more fleece in the box so that it doesn't sound so hollow

[@Bimeerwa]

Is the subwoofer decent? I am thinking to buy it

[@bobaverage]

Nice video, need to make something not so portable as this for my boat.

[@PacmanBasshead]

Add more speakers haha, i should be making another soon

[@anubisprince36]

Can you make an instructables for this project please? I'm building a bicycle trailer based on a moving dolly. I'd love to put this on it with RGB LED lights for night riding.

[@PacmanBasshead]

Its literally just a bluetooth amp powered by a battery, then to the sub and speakers. Speakers are in 0.1 cubic foot each, sub is in 0.5 cubic foot sealed.

[@ColeMcB]

I’ve been waiting for a channel like this 🙌 just subbed keep it up 🤙 and what was that music that you were playing Could use it for my own vids thanks a lot 🤙🤙

[@PacmanBasshead]

Just youtube search copywrite free music 😊

[@Eyeball1975]

Nice. You seem to have a hole in your ear, I expect you've noticed. Does it whistle in the wind?

[@robertdenaro3514]

Hi where did you buy the 6.5 subwoofer and what is it called ? Looks pretty good , would they work good for door speakers ?

[@PacmanBasshead]

Nah the sub is a sub, the cone is far too heavy for a door speaker. It was all on temu, if you just search subwoofer and scroll, the little orange thing turns up

[@garysue7561]

What a brilliant little amp.

[@ThatOneGamedev.-pi8or]

That's bloody awesome

[@ThatOneGamedev.-pi8or]

Wish I had the balls to download temu to do this content. XD

[@AndisSubaruPower]

surprisingly good with that 2nd amp.

[@mcraeelivera9309]

You should try the class-D amplifier of wuzhi audio the Zk-ht21 you will love it. It's also available on TEMU

[@razvanburada1648]

I like the industrial design the only thing missing is a leather strap handle

[@adipuiu5603]

I gave you like number 1k. Nice vid. Valuable info on those amps used.

[@madismaalt5232]

I have similar setup but with old speakers, and i use makita battery adapter. Works great for cheap amp

[@PacmanBasshead]

I got one of these and its something i wish i knew about to start with!

[@madismaalt5232]

@@PacmanBasshead yeah, i highly recommend using tool batteries, they last long and basically free if you already have them 😀 18v is great too

[@sarahkweekley9543]

that head bang was personal

[@tomtomruru95]

Cool c'est quoi le nom du subwoofer jaune?😮😮😊😊

[@fredericocorrea9814]

A little verbose but good. I liked the comparisons of the amps. It sounded pretty good to me. The one you used first really was trash. And all of it was in a terrible box but still great considering. Thank you for the video

[@waynemotherway8192]

very good enjoyable build

[@colestowing8695]

Side benefit... from a distance it looks like a surprised face 😲

[@NUMBERSCODM]

Amazing vid keep it up 👍

[@reactorb]

No bass port?

[@mikeward6021]

haaa thats funny... maybe bigger batteries or powersource give louyder sound too

[@StreetSounds-Akai]

Quality loved the vids bro,keep it up.

[@Matthew19002]

Things I'd like to play with, love it.

[@jorreman6637]

what is the name of the bt amp? i am thinking of building a boombox myself

[@SDS-1]

I love speaker builds

[@anvildesignartphotographyl5646]

why isn't the bass in it's own chamber, so as not to interfere with the full range speakers.

[@PacmanBasshead]

It is, i didnt show seperating it off as it wasnt the original plan and so it the prettiest bit of woodwork

[@anvildesignartphotographyl5646]

i recently made a small "foot stool bass speaker" for bass guitar, it has two 10" speakers on opposite sides. now the box is too small and they share the space. so the box doesn't really produce low signals, but mid and up are great. so i recycled and upcycled a foot stool for bass guitar lol.

[@ianstokes-c6i]

when in field box makes an brill seat as well as an ok sound

[@Davidisback]

You deserve more subscribers!

[@PacmanBasshead]

They seem to be on the way! Channel is growing fast thanks to people like you!

[@pitufo0406]

Question, if you placed the sub facing to the ground, maybe you could get more bass?

[@PacmanBasshead]

I did think about this, bit i figured half of it would fire backwards

[@tyroongeo]

put a compaciter on the tweeters and it will sound more decent trust me

[@MichaelDaviesMusic]

I found myself blowing at the soldering to remove the soldering smoke... ha ha

[@HebuTheLoneWolf]

1:34 is that dust or smoke? the way it flows tells me its smoke xD

[@Mikaci_the_Grand_Duke]

Although this loudspeaker is quite sophisticated, I must caution you that placing the tweeters so close together may compromise the high-frequency sound quality, particularly when listening off-axis. 😉😆

[@PacmanBasshead]

Maaaaany people have told me I fucked up 🤣🤣

[@zcomputerwiz]

Man's got mad jigsaw skills

[@stuartcarson9378]

Love the honesty.

[@MichaelDaviesMusic]

Like this channel cuz hes keepin it real!

[@nickmenard6477]

i want to make one now. thanks for doing this bro!

[@PacmanBasshead]

Gotta be done man!

[@campingwithrich]

any chance of sharing links to the parts especially the better amp so we can have a go please?

[@PacmanBasshead]

The amp is an aiyima tpa 3116, most of those parts are now obsolete sadly, twmy moves stuff on so fast!