ALIEXPRESS SPEAKERS!! EPIC BUDGET SOUND!!

[@MrTexaspete30]

Aliexpress is better then temu at least I think so anyway

[@s-napers]

At this point aliexpress is better than half the crap on Amazon

[@timothe5542]

Agreed !

[@staceymcdermott4954]

It is 100%

[@muppetpaster]

Definitely...I literally am over 700 orders in, and with that, only once lost my money in case of trouble (which I caused myself) Not all is good/high quality but way better than most people think, specially electronics.(parts etc.)

[@Space_Watcher_M31]

Is a older store with more things

[@prabhjeetdhugga1392]

I love doing speaker stuff. I’m down for the challenge

[@kjata77]

I've been into audio and weird DIY projects for a few decades, definitely down for the sound challenge :)

[@remoodak]

Finally found the perfect channel that tests audio equipments and I'm definitely up for the challenge

[@eustahijelifetips]

Check out barevids, raw cat too, nice bunch of lads in the audio world

[@MVVblog]

AIYIMA is actually pretty damn impressive! I’ve had an AIYIMA amp powering a pair of Tannoy Mercury speakers for two years now, and it’s been flawless. (We've also tested other AIYIMA gear, and the results are fantastic!)

[@PacmanBasshead]

I've literally never had a single problem with aiyima! It's always been great!

[@xluumu]

If you used 4.7 microfarad capacitors for the tweeters you have the crossover frequency at about 8000 Hz. That's quite high. You should also use bipolar caps.

[@PacmanBasshead]

I will replace them! Thankyou, i genuinley appreciate people educating me where im wrong 😊

[@xluumu]

@@PacmanBasshead I think you know what you are doing, but this way is more entertaining 😀

[@PacmanBasshead]

@xluumu what caps would you recommend then? Im always happy to learn! If its the UF that changes the crossover frequency then i may be able to use my scope to demonstrate which uf caps do what 😊

[@xluumu]

@@PacmanBasshead I’m hardly qualified to give recommendations, but with the scope, a frequency generator, a selection of caps and a ballast resistor or a speaker it should be easy to test. I’m sure you can make an interesting video of it.

[@PacmanBasshead]

@xluumu could be a good one, ill add it to the video ideas list!

[@LeonardoZadra-c7p]

I vividly remember the moment your first video popped in my feed. Since that day, I’ve been a huge fan of your content. Mate ;)

[@PacmanBasshead]

Thankyou!! Im so grateful when people tell me they enjoy the content, it makes headbutting the bench worth it 👌

[@redplatypus1365]

SPEAKERS ARE AWESOME!!! sounds like a sick challenge

[@officialzrgcloud]

I really enjoy watching you make audio out of cheap crap, I just started watching you this week. I really enjoy watching your content and want to say Thank You.

[@PacmanBasshead]

I seriously appreciate that, a lot of energy goes into making these videos and im so happy people are enjoying them!

[@bubleman2196]

This would be a very fun project.

[@andresmunozfarias1328]

A few months ago I bought a aiyima speakers in aliex , I was trying to make my own "high end speaker" but I lost the energy to do it, now meanwhile I was watching your videos(they magically appear in my principal page) I got that second breath to do it. Thanks to you I got a lot of info from your videos like the capacitor (filter) in the tweeter and the wave lenght . I´m from Chile btw I hope you are doing well and and thanks. Your videos are awesome.

[@soldjahboy]

I've been using Aliexpress for about ten years... it's actually not bad, and I'm 99% happy with it.

[@E3_Kruger]

This genuinely sounds like a fun challenge, i'm completely down for it! Video was great as well, I'm so glad I found your channel a few months ago!

[@PacmanBasshead]

Im glad you found me too! Really happy to have you onboard+

[@ugniuslamanauskas1139]

I'm definitely up for the challenge

[@bacillus9]

I love your channel! It just popped up in my feed today. My "shed" is packed fell of speaker components, cheap amps and battery pack parts from AliExpress, and my wife hates it! Haha. Keep doing what you're doing!

[@PacmanBasshead]

Thanks man!

[@MECMaintenance]

Great video as always dude! Are you on the tiktok yet!?

[@PacmanBasshead]

Perhaps i should.... Anyone able to school me?! Im old and only understand youtube!

[@MECMaintenance]

@@PacmanBasshead I'll drop you a message on FB mate

[@DJ-DFOP3]

I'm down for the challenge! as you can see I have my old boombox project in my channel it would be amazing to upgrade the low end on it if I get picked!

[@adamcraven8217]

You are the most thorough guy to review speaker that I have seen

[@PacmanBasshead]

Thankyou!

[@crapasanya]

I've always wanted to kick into this diy audio rabbit hole, and this would be an awesome push. I'm definitely down for the challenge!

[@supadeluxe]

I've been waiting for someone to buy some Ali speakers to see what they are like. Good stuff!

[@PacmanBasshead]

Pound for pound and money for money, they seriously beat the temu kit!

[@JustinnRC]

I want to do this my self , I already built a few unexclosed speakers as a project and I love this stuff , gonna look into this,

[@Nellabellabi]

If you know the speakers FS/QES value (or QTS) you can calculate the EBP. And there you got a referens value for box volume. Dont forget to add volume depending how much the speaker/hardware takes up volume of the box. You can also calculate via free online websites if or not how big/long the ports are going to be. Dont forget, ports with inserts takes volume. But as you say, if i understand you correctly you want to measure the speakers yourself to get a true value of EBP, instead of whatever jibberish values the seller writes.. If they even exist at all. I like this kind of videos you do, very cool with the battery! Cheap (affordable) portable speakers can sound pretty nice, as long as you dont expect high SPL. But if you do get it, pretty darn awsome. Hope this info helps others who would like to try, and at least get a close enough box volume to sound OK. Best regards from 🇸🇪

[@SirharlsC]

Awesome channel! I dont normally comment but this dude feels like one of the bros. Keep it up man! Great content! Always up for a challenge.

[@PacmanBasshead]

Dude thankyou! Haha, im always one of the bros! Thanks for joining, happy to continue to provide the entertainment!

[@understoodcdp11]

Watching the box build for the temu speakers made me remember I had a bunch of decently cheap gear, a hifonics 12" sub and 2 4x6 blaupunkt coaxial speakers in a walmart sub box, I have the amp coming here in a bit and I can't wait to hear it all running, tested just the 4x6 speakers earlier and it made me more excited

[@PacmanBasshead]

All for the love man!

[@evannat1273]

I subbed last week because i brought stuff off temu and made my own set up and after watching your videos now my set is getting better videos are great mate got the same energy as me

[@AdamSWL]

SUBscribed! I was obligated since you are another Adam. And who could deny such enthusiasm when you headbutt, slash and rip your way into your videos! I love it and the reviews of cheap bits from China! Looking forward to some more fookin' speakers mate!

[@PacmanBasshead]

Haha, you got it, Adam! What a name we have. Name of the gods.

[@smsno1]

That would make a bloody marvellous site radio in a tower box!

[@puttitat2851]

This channel is going places. Can't wait to see what you'll be up to!

[@PacmanBasshead]

Fingers crossed mate!

[@Ciloteille]

I build a bunch of these kinds of speakers. I like watching them being made as well. Nice job on the last one.

[@PacmanBasshead]

They are so fun! Im excited to build these into something for sure

[@MrDJmitz]

Hello Alan - from East London! I've been obssesed with your video's recently as my ADHD + (minor) sound engineering skills have led to me to build party speaker boxes just like this with the help of my neighbour (who is a carpenter!) My first build started off when my neighbour cleared his shed out and handed me a MASSIVE car sub he once had installed in his car once apon a time, which with the fact that i had previously bought a £50 party speaker for my nephews birthday party sent me through sleepless nights and moments of online shopping at midnight! Anyway with some testing / ripping apart / re boxing / ripping apart / reboxing... I currently have 2 builds, 1. 1 x WANGCL 2 x 160W + 220W 2.1 Channel Amplifier (15 - 36v) + 1 x 12" 200w Subwoofer + 2 x JVC 300W Peak/30W RMS Power speakers in a rather large / long box 2. 1 x WANGCL 2 x 50w + 100w 2.1 Channel Amplifier (12 - 24v) + 1 x 5" 100w Subwoofer + 2 x JVC 300W Peak/30W RMS Power speakers in a much more portable box I am planning a 3rd design where I combine the two - I have sourced a nice 200w 5.25" Subwoofer. With the 2nd and potentialy 3rd design I'm having a little trouble with satisfying my bass wants, I wonder if I would need to put together a slightly more complex scoop (NOTE - ALL DESIGNS HAVE A BOXED OFF ENCLOSURE + A 'LIP' TO TRY AND EXTEND THE AIRFLOW TO THE CUTOUT AT FRONT) - Any help and advice would be greatly appreciated!

[@jayweb702]

Ayima is a pretty good brand. I'm listening to this video with an Ayima DAC that I've had for about 3 years and I'm really happy with it.

[@PacmanBasshead]

Im tempted to email them and see if they'll send me stuff to review, gotta be worth a shot 😆

[@Emaisce]

The best video I have seen about sound equipment in a while

[@PacmanBasshead]

@@Emaisce thanks man!

[@Wellis1112]

how do you connect the subwoofer to the amp like what wires do you use and how do you get them in the holes

[@PacmanBasshead]

Very small wires haha, in future id use really small ferrules!

[@jdchmiel]

i have a dats v3 and yave been thinking about getting an assortment of dayton and aliexpress drivers and testing actual initial, broken in, and advertised specs.

[@PacmanBasshead]

Mines on order, should be here around the 10th, excited!

[@Random_4400]

I have the same 8 inch sub you actually have to initially break it in wit lower power because it's quite stiff then it handles higher power a lot better afterwards.

[@PacmanBasshead]

Oh no way! Thats brilliant advice thankyou!

[@Dinglezz]

I like the sound of soft dome tweeters. They're less harsh, and their f r is a bit lower, meaning they can cover upper midrange too which I feel, makes them blend in better.

[@PacmanBasshead]

I absolutely agree, im not a fan of the standard metal dome tweeters, they naturally have a really harsh tone

[@Badasscarstereo]

Nice to se that you are growing your channel! I'm happy for you! I'm up for the NEXT challenge!!!

[@shawnsanderson3695]

I want that dats too! Giving a like on this one. Enjoyed the humor and music 😊

[@shawnsanderson3695]

Suppose im down too. My main hobby swims in car audio. Its time to dive in this stuff.

[@PacmanBasshead]

Thanks man, my dats will be delivered this week 🙌

[@TRONMAGNUM2099]

That setup would be excellent for a home theater system.

[@analysingx8611]

count me in on that challenge!

[@KunalVaidya]

32V will be a good input for that amp and help push the speakers better

[@PacmanBasshead]

The amp has a max input of 24v sadly!

[@mattmattga]

never done any car/sound mods but i love this channel! i do have a studio so i love audio and am up for the challenge :D

[@PacmanBasshead]

Hell yeah for having a studio! Thanks for the kind words, makes headbutting the table worth it!

[@dain1s]

What tha... That head slam at the beginning was so unpredictable😂

[@miknord5493]

Very good Speakers in the Box!

[@ThomasWhittam]

"Yup. Don't buy this." 😂😂😂😂😂😂 Didn't expect it to go so well after the voltmeter, sounds awesome!! Definitely build it into a kids car!

[@veridico84]

That's a damn fantastic idea, I'm up for that challenge.

[@andrewfrancis2581]

Yet another excellent video, the challenge is however way above my technical ability 😄

[@PacmanBasshead]

I respect the honesty!

[@jaredsmith-bove4264]

Sounds like an awesome challenge, I already know what I’d build!

[@PacmanBasshead]

Great to hear it!

[@iambilsy]

Brother almost 7k subscribers now! Congrats

[@PacmanBasshead]

Mate i know its sick!!

[@bobaverage]

Best wishes on the 5k and beyond. Subbed today on your earlier temu vid and was pleasantly surprised to see this one now, ta.

[@PacmanBasshead]

Thankyou! I try to do one every 2 or 3 weeks now days 😊

[@bobaverage]

@@PacmanBassheadI fully appreciate the work that goes in. Just coming up with what to film is tricky enough!

[@arnisgd]

You've got yourself a sub mate. Love the content and the energy

[@PacmanBasshead]

Thanks man! Coffee is key to energy past 30 😅

[@phrayzar]

Aiyima make some great quality gear for the money, especially their amps. Liked and subbed, looking forward to seeing how you go with this project.

[@e-van3887]

Love car audio man, been watching your vids for a while now, gladly do the challenge 🥳

[@PacmanBasshead]

Ah thankyou man! Appreciate the longer term viewership! Feel like ive found my flow with reviews and builds!

[@jago7620]

Help! I’ve bought this amp and can’t figure out how to power it from my uk plugs. Amazing video!

[@Dimma205gti]

Subbed my guy. i used to get tons audio gear from the carboot as a kid. just make sht work with what you got as you do lol. Might be the next challenge for you?

[@finessetheekid7625]

Just keep doing video like these and I’ll keep watching trust me love all the way from the Bahamas

[@PacmanBasshead]

Your wish is my command!

[@fredericocorrea9814]

I would love to see how long the 18v battery lasts as a boom box. I love the music choices by the way. I'm not kidding. The tool battery thing is a real thing for me since I have like a dozen 4ah Ryobi batteries and would love to try to make a high output speaker that sounds good and runs on them. If also love to see how long the speakers would run on the Ryobi 4v 2ah batteries that charge of of USB. There's a mountain of stuff is love to try out but don't have the money for. Be blessed. I hope your channel continues to grow. The headbutting everything.... Kinda much

[@cohearty12]

Can't wait to see the box you make for these

[@PacmanBasshead]

Debating weather to make it a portable one or some cabinets for my workshop!

[@MrBroholio]

Aiyima had actually been on the rise in audio. They have some really affordable, nice home audio amps. Cheap Audio guy highlights them often

[@xtech2482]

hello mate. can you make a video about that amplifier you used? thanks

[@PacmanBasshead]

@@xtech2482 can do yeah, ive got a few now so can do them all

[@xtech2482]

@ appreciate it

[@jimc9823]

OMG too funny.. 😆 Love it! BTW you need bi/non polar caps for speakers.

[@PacmanBasshead]

Thankyou! I didnt know this! Every day is a learning day 😊

[@slimjimvw]

How would this kit fair in a car as a budget sound system?

[@_epe2590]

I love aliexpress! In fact I use it all the time to buy ampifier boards for my home audio system and it never fails.

[@PacmanBasshead]

Its such a shockingly great thing

[@Burnerrrrrrrrrrrrrrrrrrrrrrrr]

Hi, Congratz on 6k subs!

[@PacmanBasshead]

Hey thankyou! Im super pleased its growing fast!

[@thomasrielly272]

I've now got 2 of the dwault battery connectors in my shopping basket.. my question before I buy is can I use the two at the same time with the amp you used or will one be enough.. I was thinking 2 batteries means longer speaker usage. Will I need anything else to use both

[@PacmanBasshead]

Should be fine, itd be no different to multiple lithium cells, just charge them at the same time too!

[@thomasrielly272]

@PacmanBasshead if you were to go for a wired option over the batteries what kind of power supply would you use

[@thomasrielly272]

@@PacmanBasshead also did you need to buy an adaptor to wire in the battery connectors? I notice the amp you used on alibaba has a power import connector. How do you connect the batteries to this

[@PacmanBasshead]

@@thomasrielly272 its on the amp, i just wired them straight into the amp 😊

[@batman-pe3xy]

I'm 10000% down to try something like this. Love making sound systems for my car, would enjoy making something like a box instead.

[@ArPiT0198]

This all kit would make a good home audio setup

[@jtbuilds9176]

How do you get Aliexpress speakers for cheap? I can find them for dollars but shipping is over $300 each on any I can find. I can get really nice subs/speakers for the same price in the USA.

[@PacmanBasshead]

No idea, all of my shipping was only a couple of £ to the uk!

[@Zimmy_1981]

is the voltage display screen supposed to keep moving like that?

[@alfaholic3]

Aiyima is actually a pretty well respected chifi brand. They make some good stuff for the money, and they make some pretty nice amps, too like the AO7 and T9.

[@PacmanBasshead]

Chifi is my new favourite word, thankyou. Yeah i rate it to be honest, im trying to talk to them about ordering a bunch of speakers but they only seem to sell amps on their website

[@Montanari1172]

yoo congratz on the 5k subs

[@PacmanBasshead]

Thankyou! Seem to be sailing past it, on the way to 6k now!

[@gdjohny]

Adam, would that sub speaker be ok for car ? I got small enclosure that I bought years ago and used it with 10 inch speaker but it's to big for the volume of it. What you reckon?

[@Redbullet242]

Super entertaining, while still being informative. Lovely content sir :)

[@PacmanBasshead]

Thankyou 🙂

[@0525ohhwell]

Dude, Aliexpress is the OG of these Chinese marketplaces. It's my go-to. Actually it is my only one I will use.

[@PacmanBasshead]

Temu gets all the hype though! I do find the prices vary from listing quite a lot once they are in your basket!

[@0525ohhwell]

@@PacmanBasshead Oh yeah, Temu is the new shiny thing for sure. I don't touch it though, too many people getting their credit card info stolen.

[@kaanerdem2822]

i have a HORRIBLE standard sound system on my bmw which i want to replace with aftermarket speakers. Now ive seen some video's who claim its way better and a lot cheaper then harman cardon or anything else. Have you got any experiences with coax speakers? I want to hear the difference between a coax midrange speaker and a normal midrange. thank you

[@sypialnia_studio]

You are too funny man, great content! I hope one day we will see a collabo with Colin Furze, you two would break the internet with your banter!

[@PacmanBasshead]

The day colin furze messages me, i will melt 🤣

[@s-napers]

This video makes me wanna have a go at making some speakers

[@tinmesic]

Did you use normal electrolitic caps with the tweeters??

[@PacmanBasshead]

It seems as though i was wrong to do so as other commenters tell me, but now i know!

[@karczagistvan8943]

-75w 8ohm.The magnet, but no matter what I bought, I have no problem with the technical parts👍🇭🇺

[@Graham771]

Great videos, keep it up, I hope your channel grows.

[@PacmanBasshead]

It seems to be mate, thankyou! I'm very happy!

[@Anup012]

I'm up for the challenge. Currently only have 2 4" speakers in my car so was thinking about doing this anyways.

[@PacmanBasshead]

Oh man, 4's?! You need some new kit!

[@Anup012]

@@PacmanBasshead Yeah it's all treble no bass at the moment. Good thing the car is louder than the music :D

[@magable]

I'm definitly down for this challenge ! Yay :D

[@somerandomguyfromthestreet464]

You could get 12mm thick MDF and make it into a 2.1 set up with the speaker boxes (12L each) being tuned at 80Hz for that chest hit and the subbie with a 42Hz tune in about 20L (0,7 cubic feet). Both the speakers and the sub have front facing slot ports. Or you could make a huge portable speaker box like the old one but this time with separate chambers between the subbie and the 6.5" woofers and slot ports or tubes again tuned at 80Hz for the 6,5" and 42Hz for the 8". Do keep in mind that the port to cone area needs to be around 10-20%. Sorry for the long comment. CHEERS!

[@PacmanBasshead]

Haha, valid comment! Im toying with the idea of making cabinets for a 2:1 or another portable box, im leaning towards another portable box because of the drill battery adaptor now, but i also want to make some super nice looking cabients!

[@Aar0n2009]

Randomly stumbled across the Temu video and had to see this one! Let’s go!

[@PacmanBasshead]

@@Aar0n2009 thanks man!!

[@alexandergreenfield91]

Did you mean mega farad there as opposed to ultra farad bud?

[@KC-vo2ri]

Will be interesting to hear what it sounds like once in a box. Not bad for cheap speakers.

[@PacmanBasshead]

I know, i was stunned!

[@elotraccs7073]

so keen for the challenge!!!! hi from New Zealand !!!

[@PacmanBasshead]

Welcome! Ive always wanted to visit, it looks incredible!

[@elotraccs7073]

@@PacmanBasshead some places haha anywhere out of the city lol

[@elotraccs7073]

@@PacmanBasshead also after watching your temu speaker video it inspired me to make my own box for the 1st time, turned out really good, i’d really like to go in the draw because now i’ve learned how to make a box i’d really like the challenge

[@nostress6777]

Is that static we can hear when you bench tested all the speakers together around 14.00 And if so what is causing it?

[@retrolou6498]

Why use youtube compressed audio & not flac/CD quality? Were you at least playing the music at its highest available quality? Like 1080p or 2k or 4k?.. it'll have a slightly higher audio bitrate.. but still nothing compared to playing actual audio files at FLAC/ALAC quality.

[@PacmanBasshead]

The issue is that FLAC is not royalty free, copywrite will eat me alive 😔

[@RenaldoHendricks-n5t]

Where did you buy the amp and give link

[@sarfarazabid4645]

Know how to turn off the Bluetooth on that amplifier module to use the aux???

[@PacmanBasshead]

Just dont connect to bluetooth haha, it should work!

[@sarfarazabid4645]

@@PacmanBasshead nahh it didn't worked, tried that, it got 2 options for line input but none of them work., on the bottom, right under the Bluetooth antenna it got two points, with a label 'aux sw' i tried multiple ways to short it, but qll it did was' play next song, pause, play, previous.

[@franshaan7388]

Awesome to see you are going up fast!!

[@PacmanBasshead]

Its blowing up mate, 13 years of work!

[@jordankirkham1657]

Glad i saw that drill battery adapter, thanks!

[@PacmanBasshead]

Glad to help!

[@allever6278]

I'm up for the challenge man!! Love from Jamaica love the vids

[@officialzrgcloud]

Im your 5,000th subscriber :) Lets goo

[@PacmanBasshead]

HELL YEAHHHHH!!!!!!! MONSTER MILESTONE ACHIEVED! Thankyou for your support 🙌🙌

[@paulwisdom5383]

I'd also love a DATS V3. Problem for me, is it's one of those tools I'll rarely use. Irreplaceable for what it does, but I'd use it once twice a year tops :/

[@PacmanBasshead]

Start buying loads of super budget stuff and have some fun with it! Youll probably find some of the cheaper kit might not be THAT distinguishable from more mid range kit if treated right!

[@Kelp.H]

Absolutely up for the challenge

[@adipuiu5603]

I'm down for the challenge of making a class D amp with a booster converter to see how it can compare with the classic car amps. All within your budget constraints.

[@JeffreyBenshoff]

Amazing for being Ali express. Hope I get picked for the challenge!

[@SamHale83475]

i love watching these stuff man i am for the challenge