71 Johnson 20 Hp - It Does Run! - THIS OLD OUTBOARD

[@pryan05p71]

I enjoyed watching the saga of the 20hp. Thanks for your efforts.

[@THISOLDOUTBOARD1]

Thanks! Glad you enjoyed it. Stay tuned !

[@947064m]

enjoyable when a problem outboard is sorted and, penciled out now, hit the started , hear her run another outboard brought back to life. " cheer's "

[@THISOLDOUTBOARD1]

Thank You !

[@jasper60103]

Glad to see the 20hp is getting figured out. Your persistence pays off. Wish I could have found a 2 stroke mechanic like you. And yea, that 18hp ran sweet. Great video work and thanks for sharing.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Glad you enjoyed it!

[@SalvatoreFeudi]

You have the patience of a saint! Great job, great video.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@TheSteelworker]

Nice! That 18hp hauled ass too! Good video! 👍

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yeah from my "Archives" Videos. That was actually two separate videos at two separate lakes- One year apart after it sat in my storage unit- It didn't miss a beat! Thanks again !

[@randymiller1604]

Your a funny guy you make me laugh your mechanic work is good you never give up you get the job done ✔ good videos always

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@Dwusuw]

Congratulations 👏 This motor will outlive us all.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@gotchaa5914]

Great video as always!

[@Kyle-bb9zp]

WOW that was a 18 dam that thing was moving 👍👍👍

[@THISOLDOUTBOARD1]

Yeah Baby!

[@lakeside5137]

You've done a lot of work on the 20hp. I'm glad it's comig together for you. If it's a flip. I wouldn't change out jets, just tune her in good and clean her up for some cash.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yeah Baby!

[@bobbell5928]

Always fun

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@wish2fish37]

another interesting series.I feel your pain on the pull start.Wasn’t sure if I commented on this one but I picked up a 73’ 25 like this cheap,rope and electric start that was locked upand in dire need of repair.Disected it .First time messing with one of these.Coils mounted on head instead of under flywheel.Lower crank bearing seized on crank.Too many things needed replaced$$$$.Parting out.Curious,those starter brackets worth much?Starter also turns but gear won’t stay up assume it’s turning too slow.

[@THISOLDOUTBOARD1]

Hey. Those older brackets are BIG BUCKS! $400 on marineengine.com! 250-300+ on ebay

[@jimm1975]

Good video, learned about carburetor and jets , have a 69 Johnson 20hp needs a carburetor,gonna put a 25 HP carb on it

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@xxboothbykingxx3944]

I have a johnson 60 from 1970. Do you know a good place to get parts and or a manual?

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Try marineengine.com, boats.net and ebay. I have a 1970 60 hp Evinrude with remote. It's got good compression, that's all I know about it. If you're looking for a parts motor and live in the area you can have it for $150. Thanks !

[@moritz1267]

One question bud . Where would you suggest to run the battery cables to ? I've had a look at mine tonight and am having a hard time trying to pick a good spot for the leads to come out . I want it to look neat and not get in the way when steering the outboard if that makes sense . Cheers

[@THISOLDOUTBOARD1]

Hey. what I've done is use the kill button hole for the cables and drill two holes on the left & right front side corners for the kill and starter buttons- I put the kill button on the left side and the starter button on the right side- That way they're far enough apart and you/I won't be hitting the starter button when I want to kill it! You can get those waterproof rubber buttons at any auto parts store and they look similar to the original ones.

[@keithconrad4892]

What’s that support on starter one of my bolts on starter has broke bolt hole on engine mount

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Check ebay for another mount!

[@highlifegoodlife5400]

That timing thing always moves when I put it on start and try pulling it the pulling messes with it and I can't get this thing to run I've put countless #s of carb cleaner and a squirt bottle with two stroke and I can either get it to fire once and it's good or it never works. I've cleaned carb multiple times and new spark plugs and get great spark. But somethings up with that timing thing I don't get it

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Did you clean the low speed circuit. Those tiny holes need to be poked through - no amount of carb cleaner will clean them. Check out my carb cleaning video if need be- "The two most important things".

[@jato1243]

Maybe it’s just me but it seems like night and with the new carb.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yeah big difference !

[@vandos11]

Dude blow the 4hp up its too much of a pain in the azz

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Not my problem, Corey has it under control and he said it started right up every time- So he's happy!

[@jasonmoore5685]

I think it's the wrong starter hit it again😊

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Hahaha!

[@outboardfun3353]

Please put some oil on that starter

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Hahaha I shot it with W-D!

[@VernonTate-y1i]

I don’t know why they started using that plastic crap the old aluminum was the best plastic and or nylon junk never lasted like aluminum see you in the next one 👍🏻🤘🏻

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!