In this video, I attempt to repair another XBox One S that simply beeps on and beeps right back off.
Пікірлер: 51
@toolsarecool Жыл бұрын
Another one back from the dead, nice! I recently bought two myself off of eBay to see how far I can get with them. One only needed a new HDMI port and is working again, the other one is still playing games with me. Beep on-5 seconds-Beep off. All standby voltages are there and all switched voltages come up for 5 seconds (as far as I can tell). So far I found no shorts anywhere (including ethernet and HDMI retimer). The only hint it's giving me is that the fan doesn't even wiggle a bit when the console is turned on (which it does on pretty much all repair videos I've seen). Tested the fan separately and it works fine. It's a fun hunt, although at this point it's looking like donor board territory, assuming this comes down to a southbridge/GPU fault. Keep inspiring me to keep digging! :-)
@Trucam20206 ай бұрын
Excellent repair video 🎉
@ToltecMerc6 ай бұрын
Thanks 👍
@john.84 Жыл бұрын
Hello Master Congratulations, you did a great job on this GOD bless you
@ToltecMerc Жыл бұрын
Thank you very much!
@melissaash5264 Жыл бұрын
This gives me hope on the one I am working on now. Thanks
@ToltecMerc Жыл бұрын
You're welcome and best of luck in your repairs.
@Senux-Video Жыл бұрын
Thank You for Your clarity and persistence
@ToltecMerc Жыл бұрын
You are so welcome!
@nicolaslacoste9367 Жыл бұрын
As usual a very nice job. Thanks a lot for yours videos and an happy new year to you and your family
@ToltecMerc Жыл бұрын
Thank you very much! Happy New Year!
@Dandan-ef5mh10 ай бұрын
Just found your channel and subscribed. Really enjoy your videos! The one s is my favorite console to work on. Where can I get that heat sink you are using? Thanks and please keep the videos coming!
@ToltecMerc10 ай бұрын
Welcome! Thanks for joining. That heat sink came off of a scrap PC computer motherboard. I've had it for a while.
@fredb1130 Жыл бұрын
Love your video's. Thank You.
@ToltecMerc Жыл бұрын
Glad you like them!
@highroyds Жыл бұрын
Nice fix! Would love to see a repair on the Xbox one original as not many repair those
@Trucam2020 Жыл бұрын
Excellent video. Thanks 👍
@ToltecMerc Жыл бұрын
Glad you liked it!
@brianwatson1965 Жыл бұрын
Excellent once again!!
@ToltecMerc Жыл бұрын
Thank you!
@constable9793 Жыл бұрын
Iv'e got 4 of these that do the same thing. I'll try these repairs.
@ToltecMerc Жыл бұрын
Go for it! Schematics are even available!
@anojenthanikasalam1466 Жыл бұрын
Great fix. What other issues can cause the same beep on - beep off issue like in this video. TIA
@ToltecMerc Жыл бұрын
I'm not sure. As far as I can determine, if any of the run power rails do not come up in a timely fashion, it shuts back off. Specifically the CPU and memory power rails. I have only recently started working on XBox.
@Console_Tech Жыл бұрын
Another great video thanks.
@ToltecMerc Жыл бұрын
Glad you enjoyed it
@UberMicroRepairs Жыл бұрын
Nice fix and great vid!
@ToltecMerc Жыл бұрын
Thanks!
@StuP1981 Жыл бұрын
Nice work!
@ToltecMerc Жыл бұрын
Thanks! I try.
@OTuit Жыл бұрын
Nice job!
@ToltecMerc Жыл бұрын
Thanks!
@javierdejesus9041 Жыл бұрын
Hi,that repair was outstanding,i have an xbox1 s with the exact same problem and 2 add more the repair shops over here cant find the probkem, man i wish you could help me!
@Dusse_Bigelo Жыл бұрын
What did you use to clean it and what did you replace
@kevinmagsy0312 Жыл бұрын
Excellent sir!! Hqpoy new year
@ToltecMerc Жыл бұрын
Thanks! You too!
@jonquis079 ай бұрын
So was the issue was that the motherboard was dirty/corroded?
@bradleyxdebruin Жыл бұрын
Another one fixed awesome do you have a link for that holder that you used when you were re tinning that chip at 17:32
can i use a dc electronic load to discharge caps in the power supply instead of a capacitor discharge tool - i know you have both but i am just getting started and have a use for a dc electronic load and the 30 dollars for the cap tool is more i could spend on the load if I can just use the dc load -
@ToltecMerc Жыл бұрын
The voltage across the main filter caps can reach 400V. That will exceed the capability of many dc loads. You can use a simple power resistor to discharge if you insulate the leads well. You might google that and see what comes up.
@NoBody-zh3dd Жыл бұрын
I am in the same boat
@gelecfouad9954 Жыл бұрын
Good job 👍
@ToltecMerc Жыл бұрын
Thanks 👍
@sumashamu3759 Жыл бұрын
Hello I was wondering if you could help me with my ps4 problem sir.
@JBpremiumsignals Жыл бұрын
Do you have a ps4 schematics or boardview friend?
@ToltecMerc Жыл бұрын
Sorry, I do not.
@JBpremiumsignals Жыл бұрын
@@ToltecMerc oh ok thank you 😊 i am dreaming of repairing consoles too, for now im just observing
@cbrtechreviews3113 Жыл бұрын
Hi. I have this same issue on a Xbox one X. Do you do any mail in repairs?