Check out my other tool reviews: kzbin.info/aero/PLWVlC66wUw8bgSoJGLxBu2sKpHQRID3Vs
@jenniferfriedlander54505 жыл бұрын
I don’t have it yet but I need to watch the video to see if I can use it. I’ll be using it for crafting.
@noahg95653 жыл бұрын
Same
@TheAcewingman893 жыл бұрын
I was looking at rotary tools and saw this wen and came to KZbin for reviews..after watching your review, im sold and will be buying one
@731Woodworks3 жыл бұрын
It's a nice little tool
@Ben-lu7jy2 жыл бұрын
Hello, I am looking at the WEN, and appreciate the video. For your flag woodwork...if you are doing several..I was wondering if you could get a steel template of stars made so all the sizes and shapes would be uniform. I would assume it would reduce the time you are having to put in on each one also. Take care.
@JonDoe-lu1cu4 жыл бұрын
dude i am buyin one tomorrow im use it to polish the feed ramps on my wife n i guns i have the hyper tough rotory tool n i was just gona get the flex shaft off amazon but u sold me on this wen when u said u had it in ur lap for 1.5hrs n u said it didn't get hot thanks for helpin me make my desition..... I'm totally gone check out ur channel cuz my wife likes the rustic look n i build her stuff out of pallet wood(i worked in pallet shops for 20+ years)
@731Woodworks4 жыл бұрын
Thank you. I'm glad it helped!
@evelynmueller65233 жыл бұрын
i bought this in the summer...love it
@731Woodworks3 жыл бұрын
Great to hear!
@lcook08255 жыл бұрын
I have a Tack Life which I like very much. I used it to replace a dremel. It came with a flex shaft as well. Great machine.
@731Woodworks5 жыл бұрын
I’ll have to check that out. Thanks
@bigtexas75803 жыл бұрын
*I bought this same wen 2 years ago and it's been working fine. Bought the flexshaft designed for the wen, same one you have and mine crapped out in a few days. The driveshaft disconnected from the end that you screw into to the wen and so this thing is trash. Just picked up a real dremel flexshaft new for $15 on offerup and fitted it on the wen, works perfect just like a real dremel.*
@731Woodworks3 жыл бұрын
Nice deal
@will92172 жыл бұрын
I got a beginner rotery tool love it and now im asking for that one for Christmas
@martincortez23393 жыл бұрын
Good Video. I have this model and another Wen model. Compared to the Dremel, they both are about half as strong. When I push into something, it spins slower to where I have to release the even a light pressure to get the wheel going back to speed. I tend to do a tapping motion with these when I need them to work a bit harder than just cleaning.
@jacquiethielen5 жыл бұрын
I just got this for Christmas! I think my Pop was surprised when I asked for a dremel anyhow. I’m so excited because I’m ant artist and I do so much more artistically.
@731Woodworks5 жыл бұрын
Great! I’m still using mine quite a bit. Hope you like yours.
@jacquiethielen5 жыл бұрын
731 Woodworks I’m sure I will, Thank you
@321southtube4 жыл бұрын
Good review....at times however the music is TOO LOUD! Thanks
@731Woodworks4 жыл бұрын
Thank you
@KeepKalmTravels4 жыл бұрын
Mine just came yesterday
@731Woodworks4 жыл бұрын
👍🏻
@jenniferfriedlander54505 жыл бұрын
I need Diamond cutting wheels, does Dremel accessories fit Wen Rotary tool?
@731Woodworks5 жыл бұрын
If they use the same size collet, (typically 1/8”) then yes, they will fit.
@dylandesmond4 жыл бұрын
put resin inside the star to get a smooth finished depth
@731Woodworks4 жыл бұрын
great idea!
@9glrsPdt80004 жыл бұрын
I didn’t get to see how you connected the bits. I lost my instructions. Thanks anyway. Nice video
@731Woodworks4 жыл бұрын
Sorry about that. There is a wrench included. You have to stick the included pin in the hole to prevent spinning, then use the wrench to loosen the nut. (make sure it is unplugged when changing bits to prevent accidents)
@benfelland5 жыл бұрын
Maybe look into getting a foredum rotary tool if your using it for an extended period
@731Woodworks5 жыл бұрын
I never heard of that. Thanks for sharing.
@benfelland5 жыл бұрын
Anytime, was looking at rotary tools and simple little life had a review on one
@landonbarrier57744 жыл бұрын
Where did you buy this at I’m ten years old working on a budget got woodworking and this looks like a pretty good kit for the price
@731Woodworks4 жыл бұрын
I got it on Amazon
@landonbarrier57744 жыл бұрын
731 Woodworks do you know of any places you could get it in store
@731Woodworks4 жыл бұрын
Landon Barrier Sorry, I do not
@IsLander10714 жыл бұрын
Home depot might still be carrying
@timbychik76583 жыл бұрын
The flag is awesome
@731Woodworks3 жыл бұрын
Thank you
@MrRustyBob4 жыл бұрын
Can you turn up the music a bit, I'm still able to hear you talk, slightly.
@731Woodworks4 жыл бұрын
Absolutely I can!
@stonewintjen5055 жыл бұрын
Does this easily bog down or will it maintain power under load
@731Woodworks5 жыл бұрын
I haven’t had any issues with it bogging down.
@Dolly._.0fficial_2nd5 жыл бұрын
Hi will it work on dog nail grinding purpose or should I buy Dremel ?
@731Woodworks5 жыл бұрын
This will do anything a Dremel will do. They are the same tool basically. Just made by different companies.
@jenniferfriedlander54505 жыл бұрын
Shouldn’t the flex shaft be better to prevent vibration?
@731Woodworks5 жыл бұрын
Yes it does a little
@TheAusherGuy4 жыл бұрын
Does your flex shaft have alot of wobble with a bit inserted?
@731Woodworks4 жыл бұрын
No it doesn’t.
@rccvs43555 жыл бұрын
Hi great video, quick question, cna the brushes can be replaced like the dremel? That is my only concern. Thank You !!!
@731Woodworks5 жыл бұрын
Sorry, I’m not sure. At $20 for the tool, I would think it’d be easier just to replace it if they go bad.
@rccvs43555 жыл бұрын
@@731Woodworks True for me is 26$ I'm from canada but thanks, I sent an email to the company to ask same question, I'll let you know.
@731Woodworks5 жыл бұрын
@@rccvs4355 Great. I appreciate that.
@notthatgirl84544 жыл бұрын
They can. I’ve done my research😂
@onzkicg5 жыл бұрын
looks ok.. but that loudness when max- similar to a blender sound? Have you tested using the cutting tool? was it ok, I mean blade didn’t fly away? lol 😂
@731Woodworks5 жыл бұрын
I haven’t used the cutting tool yet. It’s not terribly loud.
@fostermatt36633 жыл бұрын
I just bought it and tried it out. The handle on the flex shaft got really hot quick. All I did was etch out my initials. Am I somehow doing something wrong? Have you had this problem?
@731Woodworks3 жыл бұрын
I have not
@fostermatt36633 жыл бұрын
@@731Woodworks is there anyway that I could have done something wrong hooking it up? I dont really see how that could have happened
@davidbierma40963 жыл бұрын
I have the same problem. In another review they suggested wiping off the grease from inside flex shaft and replacing with high temperature grease available at Walmart.
@731Woodworks3 жыл бұрын
It may be defective
@fostermatt36633 жыл бұрын
They replaced it
@artgallery7434 жыл бұрын
This tool is sold as a Dremel on eBay, there are many listings all the same. This is the heading of the listings: Dremel MultiPro Grinder Rotary Tools 110V/220V Mini Drill Set 5 Variable Speed. According to Wikipedia Dremel is owned by Bosch since 1993. On the tool you can see the name WEN and Wen is listed for item specifics for brand. I am curious how they can get away with this? Apparently Bosch must not have the right to enforce their Dremel tradename.
@731Woodworks4 жыл бұрын
Maybe a fake listing on eBay. I've seen some items on there before that were not real or counterfeit.
@driftowl29204 жыл бұрын
Got the same model myself, are you still using it? I'm curious if the vibration is as 'bad' on the Dremel 4XXX model, or even another model flex shaft in the Wen unit.
@731Woodworks4 жыл бұрын
I still have it, but I haven't used it in months. Sorry.
@DavidWaller1236 жыл бұрын
Have you perfected your skills with this tool to make the stars the way you want them on your flag? I'm about to get this tool to try it out also.
@731Woodworks6 жыл бұрын
I haven’t. But I was told that if I was to use plywood for the Union it would engrave much easier with crisp lines. Instead of the pine 1x material I used.
@DavidWaller1236 жыл бұрын
do you think using a straight edge chisel could clean up the stars to your liking? Basically use the tool to carve out everything else.
@731Woodworks6 жыл бұрын
That would probably work. I’ve seen others use a chisel for the stars.
@jogonzalez35625 жыл бұрын
I had needed to see how you put the flexable wire on. You skip right over that!!
@731Woodworks5 жыл бұрын
Sorry. It just twists on. Has a button on the side that you press, then twist it off/on.
@jenniferfriedlander54505 жыл бұрын
Can I drill holes in glass bottles?
@731Woodworks4 жыл бұрын
I have no clue. Sorry.
@videoman44246 жыл бұрын
are you a police officer. I know the blueline flag is for law enforcemen
@731Woodworks6 жыл бұрын
I'm a supporter of police officers. Thin blue line flag shows support. I had someone order the flag. I built this one as a prototype. Then built one for the customer.
@KeepKalmTravels4 жыл бұрын
Model#23190
@731Woodworks4 жыл бұрын
thank you
@videoman773655 жыл бұрын
foredum rotary tool $$$$$$$$$$$$$$$$$
@ryanjones75435 жыл бұрын
Don't be so nervous
@731Woodworks5 жыл бұрын
Nervous?
@ryanjones75435 жыл бұрын
@@731Woodworks may be it's just my perspective, but one example is when you talk about putting the box cover down your voice is lower due to not actually needing that comment in your video which could come off as nervous or forced. I live in Arkansas also. Keep up the good work...i just stumbled upon your channel after I bought the same tool... I am going to use mine for ewast recycled art.... I'm going to give you a like and subscribe.
@731Woodworks5 жыл бұрын
I appreciate the feedback
@ctprocess3 жыл бұрын
Love the flag, I'm a huge supporter of our first and last line of defense; our Law Enforcement! I'm going to watch your video now.
@-k-u-m-o-2 жыл бұрын
what does it mean
@ivanmoody10433 жыл бұрын
Desecration of the American flag you must be a criminal cop