You're such a great teacher!! Thanks for doing these videos!!
@OnlineJewelryAcademy6 жыл бұрын
Hi Lenna, I'm so glad that you enjoy my style of online teaching. I hope you've learned a ton from watching OJA videos. Thanks for your support! : )
@reverewareusa95552 жыл бұрын
Outstanding Presenter & Instructor. Thank you for a well-crafted video that teaches well.
@OnlineJewelryAcademy2 жыл бұрын
Thank you for such a nice compliment. I appreciate your support. 😀
@TheArtOfMetalsmithing6 жыл бұрын
Thank you so much for this video! I really need to get a flex shaft. I've been using Dremel rotary tool and it's excellent but I've been holding the whole tool in my hand which goes numb quite quickly while working. Flex shaft will give me much more freedom. There's also so many bits I haven't been using yet, so excited to try them!
@OnlineJewelryAcademy6 жыл бұрын
I'm glad you enjoyed the video. Have fun experimenting with the various attachments in your Dremel kit. Thanks for your support! : )
@delorissamuelson69882 жыл бұрын
Thank You for this video! My teacher never taught us to use a flex shaft for clean up and soo many of the "bits" are a mystery, thanks for taking the mystery from these items, I am very appreciative!
@OnlineJewelryAcademy2 жыл бұрын
I’m so glad that you found the video helpful. Thanks for watching! 😀
@artisankatstudios79027 жыл бұрын
Thanks for the video :) I would say that the polishing cones and the wheels made my life soooo much easier. Most of my work is actually carving fossils ivories (Mostly Mammoth ivory), antler and bone. I use the cones, wheels and I also have a kind of micro cone mandrel that holds 3mm wide polishing cones. We really appreciate your videos John, keep up the good work!
@OnlineJewelryAcademy7 жыл бұрын
I'm so glad that you're enjoying the videos. Thanks for your support! : )
@artisankatstudios79027 жыл бұрын
I just want to mention: Metal powders created by abrading them are extremely bad for your lungs (As you can see in the video, John has said he wore a dust mask during grinding and keeps the pieces well away from his face) and I want to remind people to wear a mask and or use a vacuum cleaner with a good filter in it and work in front of the suction head to avoid getting metal powders in your lungs. The small cut off wheels also have epoxy, fibreglass and abrasive grit in them.
@OnlineJewelryAcademy7 жыл бұрын
Thank you for posting your excellent comment for others to read. I'm all for safety first in the studio. Thanks for your support! : )
@Lindasinish6 жыл бұрын
This is a terrific training video. John, thank you for helping me understand more about the attachments available for my flex shaft.
@cat525 жыл бұрын
I was about to ask about this. Thanks for posting. Do you recommend a type of good mask to use if you do a lot of grinding, abrasion, and polishing like this?
@kennybo-iy2ed4 жыл бұрын
use someone else's face
@Merojewelleryworkshop4 жыл бұрын
nice job
@McDowallManor4 жыл бұрын
Thanks heaps for a much under-rated clip. VERY helpful.
@OnlineJewelryAcademy4 жыл бұрын
Glad it was helpful! 😀
@AnneAndersonFoxiepaws7 жыл бұрын
Actually, you've demystified half of the attachments I got with my Dremel lol! I obviously still have a lot of exploration with the Dremel before I get the Flex drive...Thanks as always xxx
@OnlineJewelryAcademy7 жыл бұрын
I'm glad that the video answered some of the questions that you had. Be safe and have fun.
@Merojewelleryworkshop4 жыл бұрын
Foxiepaws ACAnderson yes
@demichaelis2 жыл бұрын
Would have been really nice if you would have shown how you attach the spindle mandrel.
@OnlineJewelryAcademy2 жыл бұрын
Sorry, I just assumed that folks would know how to attach it. 🫤
@99999sgje6 жыл бұрын
I learned more thanks
@OnlineJewelryAcademy6 жыл бұрын
Glad you enjoyed the video. Thanks for your support! : )
@laurareutter69282 жыл бұрын
It seems like hearing protection might be useful for some of these grinding and sanding tips.
@OnlineJewelryAcademy2 жыл бұрын
True. Hearing protection is always a good idea whenever you are working with electrical motors. 🙂
@johnlowry10552 жыл бұрын
better cutting jump rings than the Jewelers saw
@OnlineJewelryAcademy2 жыл бұрын
The OJA has a video on how to use your flex shaft with a Durston jump ring cutter. Check it out. 😀
@deenieandflipjewelrydesign7122 жыл бұрын
Hi. Great video. What are other uses for the separating disc? Thanks!
@OnlineJewelryAcademy2 жыл бұрын
As mentioned in the video, separating discs can be used to remove sprus from castings. You can also use them to grind surfaces flat for soldering. You might also use them to carve a decorative textured surface. Thanks for watching the video. 😀
@MasteringHow-To5 жыл бұрын
What is the best attachment for super fine polishing. Very little scratching. Just hairline. It’s for my Rolex. I have very fine surface scratching. I need to bring back the shine. What can I use
@OnlineJewelryAcademy5 жыл бұрын
I would recommend that you take your Rolex to a recognized Rolex dealer and have them send the watch in for refinishing. You don't want to do anything to an expensive watch that could potentially decrease its value or void its warranty. Thanks for your support! : )
@shawnali593511 ай бұрын
What kind of mandrel/burr was that you were using in your flex shaft?
@OnlineJewelryAcademy11 ай бұрын
I describe the Mandela used in the first minute of the video. The brand doesn’t matter. You can get these types of mandrels from any jewelry supply company. 😀
@CharlesWilson-z3s Жыл бұрын
How do I get a new flex shaft for my Chicago electric dermal. The one I got from Amazon doesn’t fit into the sheath.
@OnlineJewelryAcademy Жыл бұрын
I suggest that you contact the manufacturer. 😀
@shaunasilver95452 жыл бұрын
hi, do you weare a mask when sanding the metal? or just while polishing with the compound?
@OnlineJewelryAcademy2 жыл бұрын
You can wear a mask during both procedures. However, if you use wet/dry sandpaper under water, no mask is necessary when you sand. 😀
@shaunasilver95452 жыл бұрын
@@OnlineJewelryAcademy thank you
@m.moghaddam87836 жыл бұрын
thanks☺
@OnlineJewelryAcademy6 жыл бұрын
Glad you enjoyed the video. Thanks for your support! : )
@abdelkrimlaagad6 жыл бұрын
good
@OnlineJewelryAcademy6 жыл бұрын
I'm glad that you enjoyed the video. Thanks for your support! : )
@abdelkrimlaagad6 жыл бұрын
v.good
@OnlineJewelryAcademy6 жыл бұрын
I'm glad that you enjoyed the video. Thanks for your support! : )
@kayecolvin87277 жыл бұрын
The one thing you didn't show...I need help with. The long sanding piece that has no way to put anything on top to tighten it. So when I use it it wobbles and eventually pops off the screw. Thanks K
@OnlineJewelryAcademy7 жыл бұрын
Hi Kaye, Based on your description, I believe you are describing an item similar to the one in the photo for the video. Just be sure that you have screw in mandrel that are threaded in the correct direction. And, be sure that you are running your flex shaft in a forward motion. Otherwise, the element on the end of the mandrel will unscrew itself and fall off. I hope this helps. Thanks for your support! : )
@artisankatstudios79027 жыл бұрын
You should put it in a vice grip or a clamp (Making sure not to bend the shaft) and make sure the sanding piece is twisted all the way down. When you start to use it (Until it wears down to a cone shape top), just use light pressure. I had the same problem until I twisted it down well.
@MrBennymarco3 жыл бұрын
where do you buy the separating disc? certain type?
@OnlineJewelryAcademy3 жыл бұрын
Here's an Amazon link that will help: amzn.to/3mmMEwm 😀
@soniaghadhoun52207 жыл бұрын
thanks
@OnlineJewelryAcademy7 жыл бұрын
Glad you liked the video. Thanks for your support! : )
@AnneAndersonFoxiepaws7 жыл бұрын
Luckily my partner works as a chef in a local hospice and he has to look out for the kitchens safety regulations and he brings me home masks (for dust but in the kitchen they're for chemical cleaners) and eye protection so for once I am probably being a good student lol!
@OnlineJewelryAcademy7 жыл бұрын
You only have two eyes. You need to take care of them. Be safe and have fun.
@AnneAndersonFoxiepaws7 жыл бұрын
Prof. John, I only have a Dremel but I have all the attachments. ..do I really need a flex shaft or can it wait until I havey cabin workshop up and running? Should be by summer when I will have it all kitted out for hot work and any heavy duty stuff. I'm managing with the Dremel so far and my torch but really want a proper kiln and forge and I am not the best at waiting (I know, its like instant gratification but I get all excited about projects and am a bit of a kid when I have to wait to try stuff out! lol!
@OnlineJewelryAcademy7 жыл бұрын
You can use these same attachments with your Dremel tool. Be safe and have fun.
@AnneAndersonFoxiepaws7 жыл бұрын
OnlineJewelryAcademy I feel bad now because I seem to have you typing and answering me as much as you would have to if I actually was in a classroom with you. I just love your channel it really gives people the chance to explore different techniques and expand their knowledge.
@artisankatstudios79027 жыл бұрын
I agree with John. For myself, I have a dremel, a foredom and a special dental micromotor machine (Kavo K10), but before I had all of that, I was using a 10 dollar clone of a Dremel (Without flex shaft, since it was badly made, the one I had) and it served me for 4 years :) If you are in no hurry, you can order a good flex shaft from Aliexpress for really cheap.
@AnneAndersonFoxiepaws7 жыл бұрын
Artisankat Studios oh thanks when I finish kitting out my work place I hope to start getting some more professional tools. .I will bear this in mind xx
@0ddSavant6 жыл бұрын
@Foxiepaws A - Wen makes a good rotary tool, the entire kit is only ~$20 - that’s for the tool, attachments, and a 4’ flex shaft. I have a brand name Dremel too, and the accessories are completely interchangeable. I’ve had no problems with either the Dremel or the Wen, but you can’t beat the Wen price: www.amazon.com/WEN-2305-Rotary-Tool-Shaft/dp/B003BYRFH8
@flyingcheff7 жыл бұрын
Does any "washer" have to be on top, or are they ever underneath? And if so, or not, why? Thanks
@OnlineJewelryAcademy7 жыл бұрын
The washer helps to keep the screw from slipping. It works best when it's on top in my opinion. Thanks for your support! : )
@sandstorm66055 жыл бұрын
Hey John, is it spelled “Mizzy” wheel? I’m just trying to figure out what name to search for at my jewelry supply website.
@OnlineJewelryAcademy5 жыл бұрын
Yes. You've got it right. Thanks for your support! : )
@flyingcheff7 жыл бұрын
pendant motor or micro motor; why choose one over the other?
@OnlineJewelryAcademy7 жыл бұрын
If you mean flex shaft vs. Dremel, I would choose the flex shaft because there are more accessories for it. This includes different types of hand pieces; including hammer hand pieces and quick change hand pieces. Thanks for your support! : P
@flyingcheff7 жыл бұрын
I actually meant a micro-motor- like the Foredom. I've seen a few jewelers using them instead of a pendant motor for stone setting work, it has the quick change hand-piece style. Always wondered....
@OnlineJewelryAcademy7 жыл бұрын
I'm not familiar with that tool. Sorry. Perhaps there's some good information on the company's website that would answer your question.
@flyingcheff7 жыл бұрын
Oh, ok. Um, item # 117599 at Rio Grande. Thank you Professor!
@cpayne17576 жыл бұрын
Does ANYONE know the make / brand of flex shaft hanger in this video...(??). Thanks! -
@mamaddoesdinner49776 жыл бұрын
Zippy DoDah Hi! That is a Foredom. All the big stores like Rio Grande and Otto Frei carry them. Good making! I couldn't do much without mine 🙂
@MrTtmich6 жыл бұрын
There are many good presenters on various subjects on KZbin, but your presentation clearly shows you are a great educator. Clear, concise and informative. But I am cringed when seeing you hold the parts by your fingers when cutting or polishing them. The parts or the flying wheel can fly off accidentally injuring you or the Dremel operator. The 30,000 RPM Dremel can cut off your finger in a blink of an eye. Why not laying down the coil on the table and holding the wooden rod while cutting the coil? I would use a pair of piers to hold the brass piece while shining it instead of holding it by your fingers?
@OnlineJewelryAcademy6 жыл бұрын
Thanks for the compliment. I'm glad you're enjoying the OJA's videos. But, I'm not using a "Dremel" tool in the videos. The speed of the tool is not as great as you stated. Second, I did not demonstrate with any attachment that has the capacity to "cut off my finger in the blink of an eye." Thanks for your support! : )
@MrTtmich6 жыл бұрын
OK. In 2 blinks of an eye :)
@flyingcheff7 жыл бұрын
difference between a "mizzy wheel" and the last white wheel you used, it's all a bit confusing....we need to know why we'd use one instead of the other, etc. (tough question, I know...). Please illuminate us with the REAL info, the whole "whatever you choose" thing is soooo misleading, mixed up. There just MUST be a reason to use one item over another... I hope! Thanks!
@OnlineJewelryAcademy7 жыл бұрын
The mizzy wheel is a very course grinding wheel. The silicone white wheel is not quite as abrasive. If you look up the various attachments on a jewelry supply website in a supply catalog, you can read descriptions of their qualities and what they can be used for. But experimentation is really the best way to become acquainted with these tools. Dremel sells a set of attachments for their tool that includes many items similar to what was shown in the video. Thanks for your support! : )