Armada Power Liftgate / Hatch does not Power Open or Close.

[@737mechanic]

KAIFNT K271 Trim Tool amzn.to/3okQQR8 NEIKO 10288A Master Hex Bit Socket Set amzn.to/34haIgw Titan 11313 1/4-Inch Drive x 4-Inch Micro 90-Tooth Swivel Head Ratchet amzn.to/3HaGKcC

[@trafyknits9222]

Thanks for posting this. I have the exact problem with a 2014 Armada. Will get it fixed tomorrow. Just finished fixing this exact problem. Thanks again for posting it. A Nissan dealer wanted $190 just to diagnose the problem...which was already obvious.

[@ChrisGauthier-hi4lh]

Great video! I had the same problem. Perfect fast, easy, and cheap fix!

[@ryanpudloski]

This video helped me. The bolt was still in place, but I put WD-40 on where the bolt holds the rod in place. That did the trick. If it meets any resistance, it won't open or close as it thinks something is stuck. Thanks for the video!

[@ericmiller2517]

Just fixed my QX56. Thank you for showing me how. Found the bolt in the well below the Jack.

[@JadeSterling]

The bolt is an M6-1.0 x (about) 18mm. Helpfully for those that weren’t so lucky to find it.

[@nbitzis]

Thank you. I needed the bolt size as mine had gone completely "walk-about" and an M6-1.0x20 with a washer/lockwasher/locktite and all is well.

[@Mrkevi123]

You're doing the Lord's work with his comment.

[@rubberstampman8889]

Found my loose bolt at the bottom of the inside fender, had to remove the tire jack to get my hand down there to search for it. Thanks for posting. 1/2 of time and lift gate working again on 2012 Armada Platinum

[@mannelugo3]

I just bought an Infinity QX56 and it had the same problem. I followed your explanation and it worked ! Gracias mil !

[@TinaLoftis]

Thank you so much for posting. Same problem, easy fix thanks to you!

[@hello-dirt]

Thanks. I also drilled a 1/2" hole in the siding and put a cap on it to easily access the bolt in the future

[@atx4fun]

Thanks for the video, loose bolt solved my problem. The only issue I had was my big hands fitting back in the hole. I had to spend 5 minutes to wipe off the blood from the scratches!

[@esmaileslami]

Great video! I had the same problem.Perfect fast, easy, and cheap fix!❤

[@christinewolfenberger2742]

Thank you!!! My 2014 did this and sure enough...the bolt was under the jack!!

[@davdaman]

Same exact issue!! Thx!! M6x15 I think I used. With red Loctite. And I used my stubby flashlight just like you to hold the panel open. Lol.

[@EdGiordano]

Had the same issue. Your video did the trick. Thanks for sharing!!

[@qtay5355]

Thank you for this video! You really saved us alot of time and money!!!

[@fredygonzalez962]

This is exactly what I need to do.. will do it right now thanks for sharing great video

[@terryreese739]

I am going to do this tonight!! Thank you!

[@mikedorosh4605]

Thx for posting.Im following your lead.Hope that’s the only issue I’ll have.Good job...

[@kristymcclendon3852]

I hope this works for me!!! Thanks for the idea!

[@SimonFlores]

My project tomorrow. 2014 Armada here. Also, the license plate. 😅😅😅

[@RJMartino]

Thank you for posting this! I’ve got the same problem! Love all the details.

[@haydencolby3953]

Thanks for posting!

[@veronicamilfordfaavi7663]

Thank you soo much for this video! My problem is I found the bolt. Then while trying to screw it in lost it again. Ordered a new one. Screwed it in. It worked then fell off again because I couldn’t get enough access to it to screw it in properly. What did you use to screw it in tight?

[@angelgranado7736]

Where did you get new bolt?

[@robstull6247]

Thank you!!

[@IslandWarrior3317]

Holy cow this just happened a few days ago

[@kevinbueno5175]

This issue occured on my car. What kind of bolt do you need? Where did you get it? If you have a link so i can grab a hold of it.

[@737mechanic]

The bolt fell down below and I was able to find it and put it back in. If yours is missing it should be down below where it screws into the rod. It is a shouldered bolt but I do not have the P/N.

[@sherrierollins1866]

Your video is Awesome! I'm a female and this is exactly what is going on with mine. The dam bolt 🔩 I'm gonna give it a shot!!!

[@737mechanic]

Good luck Sherrie, Let me know how it goes.

[@sherrierollins1866]

I so appreciate your reply. I found my bolt 🔩. My problem is lining the holes up. When my door incident happened that heavy steel piece moved and is what is causing my door not to shut. Everyone seems to want to take a hammer to it which is giving me anxiety. Help!!! Lol

[@737mechanic]

@@sherrierollins1866 If you take a hammer to it make sure you don't damage it.

[@terryreese739]

updates?