$75 DIY Camera Slider

[@igobyandrew]

Rhino never sent me the email with the list of what to get, but in an article I saw it had a picture with the items needed. So because Rhino wont tell you, here is the list: (the image quality was low, so I hope I got it right) Kyle Hart Slider Items Needed: - 1/4” & 9/64” Allen Wrench - 11/32” & ½” Socket - Hack Saw - 10FT ¾” EMT Cut in half - (8) 50mm Skate Wheels & (16) 608-2rs bearings - (8) 5/16-18 x 1.25” Socket Cap Bolts - (8) 5/16-18 Lock Nuts - (32) 5/16” Washers - (1) Simpson Strong Tie BC40Z Z-Max Post Base - (12) 8/32 Lock Nuts - (12) 8/32 x 3/8” Socket Cap Bolts - (12) 3/16” ID X 5/8” OD Washers - (1) Halex 961624 Count ¾-inch EMT Two-Hole Strap - (1) National Hardware 4020BC Slotted Steel Angle 1-1/2 by 36 inch galvanized

[@igobyandrew]

***** thanks!

[@Ranger7Studios]

Thanks Man!

[@tallguytrav]

Wow. I'm really surprised a company that makes sliders just told everyone how to make their own for alot cheaper. I own the carbon slider and I love it. Thanks for the tips! Go Rhino!

[@minxlabrada]

Well done! I was looking at a slider dolly system for almost $300. And the I looked at it, the more I realized I could build my own. And the way yours is built and finished, it looks professional enough to bring on shoots. Subscribed!

[@TechBlogOfficial]

i think it's so cool to see a company who makes sliders make a video like this! Great job guys! You are awesome!!!

[@clashpr3087]

I just made mine! it is just amazing! you guys are awesome, a company that shows their customers how to build a slider on a low budget, giving them them options without you guys making profit just shows how much you guys care for customer service. As soon as I have the money I will buy a professional slider from you guys. Awesome work.

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@rexxxar24]

I'm sold! I'm going to build this and then the next gears I'm going to pick up will be Rhino! Thank you!

[@DEVUNK88]

you guys are killing me, I have thought about building the diy slider, and then I found Rhino sliders! LOL so I was set on just buying a rhino cause I know I could build my own but it would never work as well as anything I could just buy.... and then you come out with this video lol, now I want to build own from scratch again

[@JoeGunawanfotosiamo]

I've been wanting to make a Dana Dolly budget alternative and this looks like it'll hit the spot! If I want to make a more robust version to handle more weight, what conduit pipes should I use? I also like that if you travel far distance to shoot, you can just buy conduit pipe at the local hardware store when you arrive on location. Just bring the carriage and end pieces.

[@shaobri8]

You guys just earned yourself a subscriber.

[@byjavi1279]

what was the rig that they were using?

[@trandg]

Great tutorial! You guys seem to really like your mid-layer mountain wear too!

[@EddievanderMeer]

Thanks guys! I want to make one myself now :D

[@oliverdaniels7811]

How was the tripod head attached to the carriage?

[@DoubleD629]

why didnt u make this sooner? best DIY slider ive seen. guess ill be throwing mine out

[@Beathan64]

Great tutorial, I am convienced to do the slider of my own that way. Have to check what kind of replacements can find out in the local stores here in Poland. Thanks Guys for inspiration and helpful PDF!

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@EdLau]

I see you guys have a BMPCC on it. Will it support a heavier load like a 5D3?

[@deansmit1068]

***** a question about that.....could the design be adjusted to make it safe for tilted and\or vertical slides

[@DennisKussener]

1:12 slider seft in the shot , genius !!

[@deganni2688]

super cool on the how-to for the diy peeps - liked and subscribed

[@RichardBrown121]

great video and thanks for the PDF instruction booklet. liked and subscribed

[@rubenparada866]

Hi Richard, do you still have the pdf? The link is no longer available

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@CelestialPictureskc]

Would using 52mm skate wheels effect the overal desing of this?

[@sineadoflynn167]

Awesome video! This is exactly what I am going to do tomorrow. Also, I appreciate the Lars Von Trier reference.

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@rubenparada866]

Hi, could I ask for the step by step pdf? The link is not working.

[@digitaled1080]

I tried to download the PDF and my computer security blocked access to the website due to a "back door access" malware. Wish I could have downloaded the PDF.

[@mykeaperry3538]

what cameras were this video filmed on. Thanks

[@androckdubsteady]

Just curious, what did you use to secure your tripods to the slider?

[@georgewhinney2445]

Im in the uk and just completed this slider project it works great thanks for making this video

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@Juggernaut01]

hey i never got the list build the slider

[@TERRAMOUNT]

Love the image! We shot our last movie "my days as a woflman" on the sony A7s with shogun. pretty nice picture quality :)

[@BillBurrows]

Hey guys, I signed up for the newsletter to get the build list and confirmed my email address but never received the link to download the PDF.

[@BillBurrows]

Thanks for the response. I finally got it, like an hour later.

[@StephenFreakingBean]

@@BillBurrows Can you send me that PDF? They never replied to my email...

[@dodosweex9395]

Hi... is the PDF still available please? The link is no longer valid. You guys are genius!

[@RhinoCameraGear]

Good question, I'll ask around

[@augr9095]

did you find it? I want to build this @@RhinoCameraGear

[@StephenFreakingBean]

@@augr9095 Can you send me that PDF? They never replied to my email...

[@kevinl20082008]

WHAT!!!! no PDF. I just signed up...where is the link??

[@theotherHOLLYWOOD]

Love the premise of the video: lost luggage and replacement slider. Some of my clients call me MacGyver, for coming up with solutions like this. But, odds are pretty good the tripod head would have been in the lost luggage with the slider. Hmmm..... LOL!

[@arnelindow]

Great Video! 3 hours! I try this for round about a year, not finished yet. But you guys give me hope, that I will complete it sometime. Your new Rhino '360 Swivel & Poles for GoPro Camera' arrived a few days ago and I was surprised of the great quality of the material. Great work. Your awesome!

[@finnrowden3341]

What tripod head did you use? Finn

[@DudeInsaneTrickShots]

Hey can u make a video on how to stabilize a rhino steady with a go pro it is really hard to get the timing down right and how to level it out with the weights. U made one with a big camera but I just can't do it with a go pro thanks and try to make it happen

[@Cameradep07]

Thank you very much guys. This helps out very much. I was looking for a DIY slider, that preforms professionally and looks it has well. I'm going to use it for my friends wedding that I'll be filming

[@hesham932]

Please help.... I can't get The pdf... I subscribed already!! and i didn't receive an email with the pdf... :( . . . .Following you from *EGYPT* :D

[@YousufUqaili]

I saw this video at 7 in the morning. It is now 9pm and after a full day, I made the slider. Except for how I'm missing 4 wheels and a fluid head tripod. Didn't realize how expensive they are..

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@SeanDeminski]

Wow, pretty slick! You guy should make sliders for a living! (I know, it's a joke ;-p)

[@robinottosson5209]

Is that the GH4 that you're using for this video? what lenses did you use for it?

[@BlacksheepMediaNZ]

Subscribed, didn't receive the PDF

[@VlastaStevanovich]

Great tutorial guys, really enjoyed it! What's the best hardness (durometer) for skateboard wheels to use for a slider? BTW You have great taste in movies (Five Obstructions). :)

[@VlastaStevanovich]

***** Thank you very much! :) I'll get 100 then :)

[@studioreith]

cant download the pdf. already subscribed but it doesn't work. please help. ~ julianr

[@arrowcloud9102]

Hello, Just to let you know the link with the step-by-step instructions is no longer working.

[@RobDeMaio]

What do you estimate the maximum load being? Could you use a C300-sized camera on here? Where do you recommend drawing the line? Please answer honestly, as I absolve you of all liability in asking this question and won't sue you if the slider breaks and my camera falls to its death. Also, if your recommended limit is only a DSLR-sized camera, could you recommend ways of reinforcing the track and/or carriage to allow larger cameras? Perhaps alternate building materials?

[@envisagefilmshouston]

Shut up figure it out you got the blueprint

[@Ranger7Studios]

No more shopping list? :(

[@jawmling4080]

i dint get a pdf, why?

[@nunoandradebluesdrive]

Nicely done.

[@llleolllolll]

what kinda load do you guys think this takes? Too higher the capacity just get thicker rods?

[@llleolllolll]

***** thats a good point. I'm just thinking that the head alone weighs in at a at 4lbs. Add in a 5d and a 24-70 and we're already close. Shorter rails should also higher the capacity, i'll try it out after finding all the parts here in europe :P

[@randomperson-yk3kt]

leolol if you find your camera is weighted to the front because of the lens just counter weight it at the back, maybe a weighted handle i dunno but just counter ballance and this rig would work fine with bigger lens

[@ConnorLandrum]

what camera was this video filmed with?

[@ConnorLandrum]

***** thanks!

[@drewread7118]

I subscribed and I did not get an email with the PDF... I'm a little upset...

[@jackwenman777]

You should try doing this in England our hardware stores are wank! and super expensive!

[@Emperor-2029]

Maybe you have already thought about this, but i suggest by me to list this slider in ebay and sell it, many buyer will apply to you and will buy from you this slider if price will be 75 itself cost+25$ (for example) your job cost + 20-25$ for shipping to Armenia (for example my country) + ebay+paypal Brokerage price/cost. i will buy from you with Pleasure! Nice job!

[@MrExplorerFilms]

The point of making thee video was so YOU could make it. It wasn't so the company that produced the video could make it and sell them to you, they already make and sell their own equipment.

[@MaghoxFr]

Why not buying the parts and making it yourself?

[@Emperor-2029]

MaghoxFr I like to buy already READY slider from manufacturer or from this type of GENIUS guys.

[@MaghoxFr]

***** THese guys have a company that sell sliders. Maybe you can buy one of those. Or you can get the parts and build it, it's a very easy build. Cheers

[@JoDaddysGarage]

Brilliant. Love the re-purpose ideas.

[@nushuka]

wow!! amazing video, amazing slider, amazing explanation!!! thanks!

[@MegaLeonidovich]

Wow good job guys. I love this idea since i already built alot of diff diy cam sliders ill probably steal your idea and build same one just cause I love to build diy cam projects

[@isaachubbard7903]

Where are the instructions??

[@andremunafo]

THANK YOU RHINO!! Appreciate!! Really good and helpful tutorial!

[@dennisrivas7478]

pueden darme los materiales de cada uno, Por favor, es que lastimosamente en mi país les cuesta entender. Por Favor

[@ApostolosNikolaidis1]

Great one guys!

[@MarkoZutic]

wait you first wanted to use angle iron and then you stepped up with tubings? :D

[@EricB]

I've wanted to make a slider that could be extendable, flexible, and smooth moving a camera slowly through a foresty scene, from very near the floor to up in the canopy.

[@artorhajdini1]

1:13 or you can just grab that slider over there haha xd

[@ndidgenous]

soooo cool guys many thx, just subscribed!

[@coach_yo]

So cool thank you for sharing!

[@BubbaMediocrates]

Great hack. Thanks for sharing!

[@llleolllolll]

i didnt get the list yet, after subscirbing to the list.

[@llleolllolll]

***** i resubbed with a secondary email and now have it, but it didnt work the first time.

[@bradconfer7065]

any idiot can figure out how to make a slider. At least...that was my hope... but yours was simple, elegant, and all the work you put into the pdf and video and shopping list saved me hours of doing my own idiot thinking. Of all the DIYs I've seen on this this is my favorite. Except for that compression you have on the mic in the first shot. Made my head hurt. If you have that shotgun going into the DSLR I'd turn off any wind cut or compression.

[@WilhelmAwe]

Building my DIY slider, had the parts, so why not. Thanks bros.

[@StephenFreakingBean]

Can you send me that PDF? They never replied to my email...

[@sunlightpictures8367]

You guys are awesome.

[@RhinoCameraGear]

Thanks!

[@elijahometz5671]

Look at just after the 10 minute mark "diy Sider" 😂

[@QuinnWaters]

awesome. thanks!

[@jesus31031]

Rhino can you make a gopro DIY cable slider

[@joseisrael8535]

Excellent!! 👍

[@TekOverclocked]

i subscribe to you guys.. i love this video! Thank YOU!!!!!!

[@karmeluk]

great. fantastic. thank you very much

[@santoshkumarvijayan]

Background music sound is irritating....

[@scotteisenbeisz363]

WTH guys! North Dakota isnt THAT bad! Lol

[@deansmit1068]

didn't a get the pdf link go to support and i am asked to open an account.....hate the free shit that isn't really free.......................hassle isn't free, keep your pdf

[@rocketsoda9188]

Put in your email address and you'll get the pdf. It's no a huge hassle.

[@deansmit1068]

Saajan Chowdhry i dd twice never got it

[@JaredGGG]

Nice

[@MrRetired62]

you never heard of pvc pipe

[@7privet_]

It might work, but after more than 1 use, and the total weight of gear you put on it is more than 1kg it will start to bend.

[@swedervandipten2330]

For 75$ you can better buy a nice professional one