79 Ford F150 351M exhaust review magnaflow vs bullet style (ebay specials)

Similar larger style muffler in this test
www.summitraci...
Similar bullet style
www.summitraci...
79 f150 4" rough country
38" nittos
15x12 wheels
351M
C6
stock gears for now

[@danielbrummitt832]

You gained a follower for the Bible verse thats awesome man

[@JohnnyAnderson1]

I give credit where it’s due! Thanks man, I’ve got a bronco that I plan to do one day. I have just have been swamped with other things the last year or so! Hopefully will get some more content out soon.

[@pnwchris2000]

That’s a badass little Shortbed 4x4! I’ve got two of them as well, my trucks are ‘77 & ‘79 Shortbed 4x4s.

[@JohnnyAnderson1]

Nice!

[@dre83cpt]

that trucks sounds and looks good!

[@JohnnyAnderson1]

Thanks!

[@chocodiledundee1]

Cool truck man I love the roll bar , I’ve got a 79 Ranger XLT with 351 Cleveland here in Australia 🇦🇺

[@JohnnyAnderson1]

Well you shouldn’t have any trouble finding a good set of heads if you decide to build the engine, seems like all the 4v heads are in Australia lol.

[@chocodiledundee1]

@@JohnnyAnderson1 yes buddy we’ve got the 4v in Australia, My truck being 79 it’s the 4v as well . Truck looks mad , those 78-79 Trucks are said by most even Chevy lovers as one of the coolest trucks ever !

[@x4x4offroad87]

Sounds pretty good man I love it I got a 78 F-150 4 wheel drive short wheel base that I'm working on right now Love it

[@MetalRocker94]

I'm shocked at just how much those bullet mufflers quietened it down. I would've went with either Flowmaster Super 10s or Cherry Bomb Extremes. And ,hello fellow Tennesseean.

[@JohnnyAnderson1]

The flowmasters and cherry bomb extreme give to much of a rattle sound in my opinion.

[@reggiesanders1229]

Hell yeah that sounds bad ass!!!

[@WastedTalentFabrications]

not normally a Ford guy but thing looks and sounds pretty awesome

[@JohnnyAnderson1]

Thanks, its a beast!

[@autopartsnw4857]

Sweet truck. My neighbor just bought the same truck but his is a '78. It has duals added but is way too quiet... I'll direct him to this video. 👍

[@JohnnyAnderson1]

defiantly makes the truck sound as cool as it looks lol

[@bryancondrey6457]

Your brake fluid (DOT3) will boil in their line when you sit at a light. Had the exact same fenderwell headers. Eventually went to regular headers to solve the issue. Header wrap starts rust so wrapping means you have to do it over again. If you hate exhaust leaks, go get a ball socket joint and replace any three bolt 'designed to leak' flanges.

[@JohnnyAnderson1]

Thanks will keep that in mind if it becomes a problem

[@Camaron9769]

not a fan of lightbars but other than that beautiful truck

[@brad904]

Sweet ass truck!👍

[@reggiesanders1229]

And those are Magnaflow bullets? Or off brand bullets? Sounds awesome!!!

[@JohnnyAnderson1]

off brand, just a straight through bullet style muffler.

[@reggiesanders1229]

Thanks!!! Sounds bad ass!

[@antonioayala943]

Where did you get the headers and exhaust? Interested in doing this myself

[@JohnnyAnderson1]

Headers came from summit, they were headman brand outside the frame 3” exhaust pipe And 3” bullet mufflers from eBay

[@joshwilliams2117]

You’ve got big muscles.

[@JohnnyAnderson1]

No, I just have short arms

[@brad904]

😂

[@joserios9340]

😂😂

[@scottshowalter2614]

Beautiful truck, happen to have the eBay parts number for the bullet style exhaust? Appreciate it

[@JohnnyAnderson1]

Thanks! I don't, they change them up all the time and don't really have a actual number. The ones I use now are from summit racing part number FMR-12867-FM They work great and are pretty much the same price as the ebay ones, just from a more consistent and reputable source lol. I'll try and post the link below. www.summitracing.com/parts/fmr-12867-fm?rrec=true

[@colbymulligan1473]

Where did you get the roll bar? Looking for one for my shortbed

[@JohnnyAnderson1]

Had it since the 90s Might find one on marketplace

[@kevinjenkins7926]

Is this a exhaust kit you used for the truck?

[@JohnnyAnderson1]

No it was just some headman outside the frame headers, 3” exhaust pipe and 3” bullet style mufflers

[@robertcarawan4868]

What size are the rims on your ford pick up from Robert carawan in little river sc the 78

[@JohnnyAnderson1]

Hi Robert, the wheels are 15x12 with 38x15.50 toyo M/T's

[@rigoargoth3096]

Nice truck, what lift you got on it

[@JohnnyAnderson1]

4” rough country

[@tunerag4705]

Hey brother do you have the part number for those headers

[@JohnnyAnderson1]

Part number 89360 from headman www.summitracing.com/parts/hed-89360?seid=srese1&gclid=Cj0KCQjwz8emBhDrARIsANNJjS7FvT_PNNysg8tbkm7AOHpGpQACCNKA3xP9Uivggg72YShGXzRleQIaAmmCEALw_wcB

[@dime4ever101]

Where did you get the black trim from?

[@JohnnyAnderson1]

Painted the stock trim black

[@jaredcowan3180]

Where did you get your sway bar links? I’m looking everywhere for them at +4.

[@JohnnyAnderson1]

Summit if I remember correctly

[@jaredcowan3180]

Thanks! I'm an F250 and that seems to make difficult to find. @@JohnnyAnderson1

[@ferreiramiguel2910]

a machine

[@jeremywood2662]

How do you keep your tires from turning header in to a pancake did u put spacers on the front

[@JohnnyAnderson1]

It's lifted

[@jeremywood2662]

@@JohnnyAnderson1 how high of a lift is the headers that go on the inside of the frame good or is over the frame better because I need to get new headers because the tires have smashed them up so I just don’t want to buy the same headers if the keep getting smashed

[@bobhilly546312156332]

What can is in that bad boy

[@JohnnyAnderson1]

Not sure, guy said it was stock he bought it from so it probably is since the entire truck was stock.

[@robertfogarty3253]

How about help,I'm garage car guy because of necessity, dad's 341m f250 seguestion rebuild,or replace with aluminum heads ect.

[@robertfogarty3253]

Oops 351m

[@JohnnyAnderson1]

What’s wrong with it?

[@robertfogarty3253]

@@JohnnyAnderson1 just 105,000 44 yrs of use in summer with camper

[@JohnnyAnderson1]

@@robertfogarty3253 if it’s got good compression and not smoking I wouldn’t mess with a rebuild, the 351m/400m are know for lasting a very very long time. A set of aluminum heads, cam and a 4 barrel intake would certainly wake it up.

[@amodernwar1802]

Where did u get the roll bars from and how much was they

[@JohnnyAnderson1]

We took the roll bar out of a 1986 f150 and modified it to fit. This guys dad bought it back in the 80s so no idea where to get one now.

[@iszy1311]

What magnaflo did u have?

[@JohnnyAnderson1]

It was just a cheap knock off, summit sells them under the name "Flow Monster" part number 11219 www.summitracing.com/parts/fmr-11219-fm

[@braedengraham2268]

Sweet Pete in the back, what’s she do

[@JohnnyAnderson1]

Flatbed O/O here’s a link to a post big rig videos did. facebook.com/1355979481207653/posts/2226738510798408/?d=n

[@braedengraham2268]

@@JohnnyAnderson1 Beautiful man, thanks

[@carlabanks5496]

What brand bullet muffler?

[@JohnnyAnderson1]

Just search eBay for around a 18” stainless bullet muffler

[@avoid_ice2]

Where did you get the roll bars?

[@JohnnyAnderson1]

It was actually bought new in the 90s by the man’s dad that owns this truck. He had a 1986 f150 that it used to be in, and we just transferred it to this truck.

[@mattb4164]

Exactly what color is this truck?

[@JohnnyAnderson1]

It was a Subaru silver metallic, from a 2005ish year. At least that’s what the paint code came out as, although I don’t remember the code lol.

[@williamsanders468]

Yeah blame the Ford. It’s not the trucks fault it’s the engineers fault.(Sarcasm) also Chevy guy the saw only works when it’s plugged in.

[@JohnnyAnderson1]

lol, when my cousin is in a video its impossible to not act goofy... I do own a couple of Fords so im always reminded how much I love GM lol

[@williamsanders468]

@@JohnnyAnderson1 You can talk shit on the mod motors all ya want but a SBF pushrod motor just has such an amazing sound.

[@JohnnyAnderson1]

@@williamsanders468 even the mod motors sound amazing minus the crownvic’s with straight pipes lol

[@SteveW79-2K]

Is that 3" pipe?

[@JohnnyAnderson1]

yes, dual 3"

[@SteveW79-2K]

@@JohnnyAnderson1 351m, 400, or 460 engine? Sounds very nice

[@JohnnyAnderson1]

Steven Wineinger 351m Thanks it is actually one of the best sounding old fords I’ve heard. The video doesn’t do it justice, it sounds like a 800hp engine above 3000rpm .... if only it was lol

[@SteveW79-2K]

@@JohnnyAnderson1 I'm having my 400 built a little. Boring 30 to 40 over, throwing a cam in it, full length headers, and a 4bbl intake and carb. Thinking about 3" straight pipes.

[@JohnnyAnderson1]

@@SteveW79-2K it will sound good but it will be very loud, witch might be a good thing depending on your truck lol

[@jeff40]

Nice truck! A little loud for me kind of makes it sound like shitty chitty bang,bang! 😂 🤣 🤣. jk It does sound bada$$ going down the road!

[@JohnnyAnderson1]

Lol

[@jamesjohnson9668]

That thing sounds like shit

[@JohnnyAnderson1]

All opinons are welcome, your content is much better on your channel...