7age ae86 Fujitsubo Legalis R Exhaust + Toda 4-2-1 Headers Install/Drive

  Рет қаралды 13,350

Never Lift

Never Lift

3 жыл бұрын

Ive had this footage since 2017 and just never uploaded it due to my sheer disappointment in this exhaust.
I never got a video of how it sounded with a standard 4age but now I'm running a fully worked 7age I have a new found love for my Fujitsubo Legalis R Exhaust.
In this video I give you guys a closer look at my toda headers and talk about the quality of the whole system.
I also take you guys out for a drive and I do my best to show you how this exhaust sounds in as many situations as possible such as idling, cruising and high revving.
Hope you enjoy.

Пікірлер: 42
@garrettdlouhy5531
@garrettdlouhy5531 3 жыл бұрын
That sound is unmistakable. It seems the 16v head is the key to that exhaust tone. The block brings it down ever so slightly. I'm in love 😍
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
I’m really happy with how it sounds but there’s a new exhaust on the cards for a future video just to see how much power this engine is actually capable of
@pandacoupe
@pandacoupe 3 жыл бұрын
That slight crackle on low deceleration sounds so good..Nice 2step launch :)...love the toda headers to..a 60mm cat back would finish it off perfectly
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Yeah future plans never stop lol, thanks for the support man 👍
@meXicossie
@meXicossie Жыл бұрын
Man those roads though really nice for a hill climb event, was gonna mention the drop off in 2nd but realized someone else observed it
@joe4ag
@joe4ag 3 жыл бұрын
wow Niko that sound sick man, you have a beast right there. ;-)
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Thanks man 😄
@pothead503
@pothead503 3 жыл бұрын
You have a new subscriber and I will save this to my favorites, lol.
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Cheers thanks mate, I’m actually working on another drive video you’ll probably like too, very similar to this one but pure ITB sounds
@steves4164
@steves4164 Жыл бұрын
Very nice indeed, I just ordered a set of Fujitsubo headers for my '03 Toyota Altezza can't wait to get them fitted!
@NEVER-LIFT
@NEVER-LIFT Жыл бұрын
Nice, have they arrived yet?
@steves4164
@steves4164 Жыл бұрын
@@NEVER-LIFT yeah man had them fitted not too bad, needed custom heat shield to stop the power steering reservoir from cooking. And getting it tuned with a link ecu next week as the cars not really taking advantage of the flow lol.
@ronniejarvis2679
@ronniejarvis2679 3 жыл бұрын
Great throttle response.
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Yeah it’s good fun
@B1acjak
@B1acjak Жыл бұрын
Sounds SO GOOD. Wow.
@NEVER-LIFT
@NEVER-LIFT Жыл бұрын
Thanks😄
@logbearphotography3532
@logbearphotography3532 3 жыл бұрын
I need HELP with my build!!!!!! I'm trying something new and I saw your videos and now I'm 💯% sure of what I wanna do! It has not been done yet, I think you'll like it!
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
What’s the plan
@logbearphotography3532
@logbearphotography3532 3 жыл бұрын
@@NEVER-LIFT I can send you the pics. I know it doesn't make any sense but that's the car culture 😂
@krayzee11
@krayzee11 3 жыл бұрын
need a 4-1 with those high cams man
@markolisica1132
@markolisica1132 3 жыл бұрын
This still hypes me up every morning :D
@anthonyfato7488
@anthonyfato7488 3 жыл бұрын
Your neighbours must love you. I do like it though. 👌
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Who doesn’t like a 7age 86 screaming up their street
@pothead503
@pothead503 3 жыл бұрын
I'm using an OBX header, test pipe and Buddy Club Spec II catback with my 20v bt. I'm thinking of switching it up to either Fujitsubo or Toda header and Fujitsubo Legalis R catback.
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
That’s awesome, just be sure to take note that when I was running a standard 4age 16v the fujitsubo was totally silent. All depends on what your after but I wasn’t happy with it
@pothead503
@pothead503 3 жыл бұрын
Thanks for the response, that's good to know.
@alvawilliams9836
@alvawilliams9836 2 жыл бұрын
Hey do i of to any kind of rewiring when putting on ITBS on my 4AGE 16v engine
@7_7_5
@7_7_5 3 жыл бұрын
Sounds really good, though i think that the gearing is spaced out too far, bogs down when (i think) you shift from 1st to 2nd, but still, a really awesome build, keep the Videos coming!
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Really good observation mate, you’re not the first to mention gearing but you are the first to notice from just watching a video. To be honest I’m really happy with how the car drives and I’m not likely to change up the gearing, I was surprised how much torque this new engine had down low. Thanks for the feedback man 👍
@7_7_5
@7_7_5 3 жыл бұрын
@@NEVER-LIFT no problem, i am loving the build!
@bigbob3197
@bigbob3197 3 жыл бұрын
Oh wow this the guy from insta :D Saw the intro there... amazing car...Would like to buy an 86 too but there are like 2 or 3 in around 1000km area...and all over 24´000€...bit much...
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Thanks big Bob, unfortunately it’s only getting harder to buy one of these old tin cans maybe consider going through an importer 🤷‍♂️
@bigbob3197
@bigbob3197 3 жыл бұрын
@@NEVER-LIFT Yea...but that´s pretty expensiv too...but Imprts are mostly right-henaddrive....and that´s not so good to drive in europe...left-hand would be perfect, but how knows, maybe this year I will find one ;)
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
BigBob oh ok I see stay positive and don’t give up it’ll happen eventually
@Joseph_Alnie
@Joseph_Alnie 3 жыл бұрын
Niko, did you guys try to dyno without the catalytic converter and see if you’ll get the hp numbers for the engine build.
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
No not yet but it’s on the cards for a future video
@POVShotgun
@POVShotgun Жыл бұрын
Why were you disappointed, sounds great
@NEVER-LIFT
@NEVER-LIFT Жыл бұрын
I was disappointed when I was running a standard 4age it was way too quiet, Now it sounds great but it's unfortunately a restriction and I would probably make more power with a larger system
@markolisica1132
@markolisica1132 3 жыл бұрын
Snap, crackle and pop! Sounds like you hit 11k rpm? 😅
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
I wish
@pothead503
@pothead503 3 жыл бұрын
One hater is jealous, lol.
@NEVER-LIFT
@NEVER-LIFT 3 жыл бұрын
Lol
This Was a Disaster... | AE86 JDM Header Install
17:33
Dustin Williams
Рет қаралды 68 М.
FULLY WORKED 4age/7age Build in 5min
5:01
Never Lift
Рет қаралды 60 М.
New model rc bird unboxing and testing
00:10
Ruhul Shorts
Рет қаралды 24 МЛН
Amazing weight loss transformation !! 😱😱
00:24
Tibo InShape
Рет қаралды 53 МЛН
How to fix the WORST sounding V12 Exhaust
27:34
Maisteer
Рет қаралды 1,4 МЛН
Why the 4-2-1 vs 4-1 debate is STUPID
13:43
SpeedLab Channel
Рет қаралды 42 М.
AE86 NEW EXHAUST
10:12
Rick Cunanan
Рет қаралды 5 М.
Cheap Headers and Exhaust - Do they work? - Dyno tested
5:36
Garage 4age
Рет қаралды 32 М.
ae86 First Start FULLY WORKED 4age/7age Build Part 7
15:03
Never Lift
Рет қаралды 10 М.
ae86 Dyno FULLY WORKED 4age/7age Build Part 8
17:46
Never Lift
Рет қаралды 27 М.
Мотоцикл за 10 000 рублей!!! 😳 до конца
0:29
Дарина Мяу
Рет қаралды 1,5 МЛН
Злая Ауди vs Пассат! Оживление корча и заруба на треке!
1:28:47
ФЭТБАЙК vs MTB Что лучше ? #shorts
0:21
Леха МАК
Рет қаралды 615 М.