8.3.1.2 Packet Tracer - Skills Integration Challenge

[@KennyZcow]

Thank you so much, Christian. You've got no idea how much you've help me and my classmates throughout CCNA 1, 2, 3 and 4.

[@romeroc24]

+KennyZcow really thank you for kind support, I appreciate

[@veronicagutierrez2571]

Estimado, excelentes tutoriales, he aprendido más con los tutoriales que con mi "profesor de redes". siga así, no desmaye!!! Great job!!

[@romeroc24]

+Washington Gutierrez Gracias por todo tu apoyo, muchas gracias de nuevo

[@michaelmirtica3454]

Thank you so much for taking the time out to do this! It saves me a lot of time! I hope to be as smart as you one day when it comes to Cisco Networking lol.

[@romeroc24]

Michael Mirtica thank for your good comments

[@howardtrott1289]

+Michael Mirtica me too!

[@purpleninja225]

Thank you so much for these videos! They have helped me so much while I practice and study to take my CCNA!

[@romeroc24]

Thank you for all your support

[@castielle532]

You sir, are a WIZARD! Thanks for the help! You are very good at walking people through this stuff. Thanks again! :D

[@romeroc24]

Thank you for all all kind support

[@fcoker73]

You always help me out whenever I'm stuck!!!! Thank you and keep up the good work!!!!

[@romeroc24]

+fred coker thank you for all your support

[@nsxviper]

Thank you, this has helped me a lot. Drove me nuts when eigrp router-id was deducting points.

[@romeroc24]

***** Thanks for your visit

[@Salgueroos]

Great job. Cuando en el minuto 33.22 tenias 87% de 90 yo habia alcanzado los 90% y te digo que no se que hice de diferente segui todo punto de tu explicacion. Gracias Augusto eso si te digo "eres genial"

[@romeroc24]

Gracias por seguir estos videos

[@Salgueroos]

Christian Augusto Romero Goyzueta​, gracias a ti.

[@WoggLP]

baro excelento chriastian augusto romero goyzeta porsche carera GT 8 valec fest vela koní u helped us a lot ;) ,

[@romeroc24]

thank you for all your support, I appreciate

[@cosminfaur]

Hi, thanks for all your videos! Question: On R1: all available networks from the summary route exist... so why is there a Null0 route? Am I missing something?

[@romeroc24]

the no auto-summary command will remove the null0 route

[@Poperan]

Thanks for the video, you are always helpful

[@romeroc24]

Thank you for all your support

[@leandrorodriguez4444]

hey chris I have a question. the reason why in MIN 17:40 you summaraized the loopbacks and apply the summarization on the s0/0/0 interface is because to get to those loopback addresses you ll be using the s0/0/0 interface? so in other words you are advertising the summarized loopback addresses through the s0/0/0? thank you man you are badass man!

[@romeroc24]

thank you, the reason is notify or advertise that address summary on the serial interface and share that information on that side of the network

[@howardtrott1289]

Hey Christian. I don't understand how you came up with the table for IPv6. Would you be able to do a short video on how you summarized the IPv6 addresses...its so confusing. I would appreciate it.

[@romeroc24]

+Howard Trott this video will help you kzbin.info/www/bejne/pHrQqoavjL51gbs

[@howardtrott1289]

I saw that right after I posted that message to you. I had a another look at the videa and I see how you summarize the Ipv6. Say have you done videos for evey Packet tracer? Thanks for answering my post! it did help!

[@romeroc24]

+Howard Trott thank you for all your support, search on my channel the playlists and videos of ccna kzbin.info

[@Porcyln]

Thank you again Christian!

[@romeroc24]

Thank you for follow these videos

[@jeleahbugnay2128]

another thank you sir christian, it's such a great help

[@romeroc24]

+jeleah bugnay thank you

[@josephweber7864]

you are awesome, man!

[@romeroc24]

omg

[@ivandamico93]

Thanks for posting!

[@romeroc24]

Ivan Damico Thank you for your comments!

[@MrLukoluko11]

thank you so much sir.. :) all you're video help me pass :) thanks

[@romeroc24]

Thank you for follow this channel

[@perrycox3113]

ty for your help, one question. on R2 why is the summery 10.0.0.0/8 and not 10.10.0.0/22?

[@romeroc24]

For EIGRP you can use the classful network address for the loopback interfaces (10.0.0.0/8). But when you want to do a summary and notify it on serial interfaces you must use classless (10.10.0.0/22).

[@perrycox3113]

i mean 10.10.0.0/21

[@perrycox3113]

Christian Augusto Romero Goyzueta ty, your help is greatly appreciated

[@romeroc24]

Perry Cox Thanks for your comments

[@hdffris9793]

Perry, the Reason is this, Its for classful that means its has to be a /8 , 16, 24 subnet. You have to understand your ip classes. A 172 on R1 is a class B ip. so its a /16 and the 10. ip on R2 is a Class A. so its 10.0.0.0 0.255.255.255 subnet

[@pepeluchodg]

Estimado.. Gracias por el tutorial tengo una pregunta como obtienes la direccion de red de clase para las looback...Saludos

[@romeroc24]

Hay que identificar que clase es puede ser A, B o C, de allí puedes determinar la máscara que corresponde a cada clase, pero si fuera VLSM debes de ver este video kzbin.info/www/bejne/jpq7oZJsYsyaqMU

[@pepeluchodg]

Ok muchas gracias x la ayuda..exlentes videos

[@AN1MATEK]

Shouldnt it be just "network 172.31.0.0" if its asking for classful? The command is legal without a netmask, which is exactly what a classful address is, right?

[@romeroc24]

for 172.31.0.0 (class B) address the classfull netmask is 255.255.0.0, www.vlsm-calc.net/ipclasses.php

[@gilberto1533]

Quetal como estas Christian, nuevamente dejame felictarte por tan amplio canal que tienes en especial en referencia de todo lo que es sobre CCNA. Muy buena preparacion no solo a la hora de explicar si no tambien en el desarrollo de los temas en PK. Queria comentarte que en algunos de tus videos tu tienes las instrucciones y es de mucha ayuda y en otros tienes el packet tracer, pero por alguna razon no descargar ninguno me dice q se contacte el administrador en este caso tu ya que el archivo ya fue descargado muchas veces. Hay algun folder q tengas en Google drive donde se encuentren las instrucciones de los PK con los PK para poder referirme a ese path para las descargas? Saludos y espero tus comentarios

[@romeroc24]

Seguramente se excedieron el número de descargas limite, sin embargo si por este medio o por un mensaje privado puedes enviarme tu email para enviarte los materiales

[@sokchanntem1464]

+Christian Augusto Romero Goyzueta (romeroc24) thanks your video

[@arshsandhar]

What did you do in the excel spreadsheet? is there a tutorial to understand that?

[@romeroc24]

this kzbin.info/www/bejne/opPIqKyaaLaIrsU

[@marlonvillacinda865]

Que tal Christian. Cuando descargo este pka file y lo abro el IPV4-Branch no lo puedo ver porque esta tapado por la texto con direcciones, no lo puedo mover ya que moverlo no esta permitido. Como puedo solucionar esto?

[@romeroc24]

puedes usar versiones anteriores de packet tracer, otra forma más accesible es usar la lupa para agrandar o achicar de esa forma se hacen espacios, por último puedes conectar un cable de consola para configurar desde una PC

[@marlonvillacinda865]

Te agradezo la pronta respuesta. Me sirvio mucho. Gracias por todos tus tutoriales enserio me estan ayudando.

[@jeleahbugnay2128]

I wish you could be one of our professors.

[@romeroc24]

+jeleah bugnay thank you for all your support, I'm here for any question

[@fluffyball_hero3758]

can u do the cisco 8.3.1.3 skill intergrated challenge 2019

[@romeroc24]

please send me the specific name of the activity or the file to [e-mail]

[@GUCCI9001]

Thank you Christian

[@romeroc24]

Thnak you too

[@GUCCI9001]

Sir, how can i contact you without here i want some information from you if you dont mind. Thank you again

[@romeroc24]

GUCCI9001 Italien_Girl My email is [e-mail]

[@hectoryusseflaradavila8820]

al configuarar una red con clase por ejemplo la de esta practica puedes configurarla simplemente con los commandos - network 172.31.0.0 - sin necesidad de poner su wild card, cierto? . Saludos.

[@romeroc24]

si porque es implícito que la máscara de subred será la que está por defecto para cada clase

[@dane4ka97]

Thanks you! IPv6 is very hard

[@romeroc24]

Thank you, it is about time and practice

[@jamesgoeslive]

thanks!

[@romeroc24]

omg

[@frageater16]

Do you know all of this studying it on Netacad? Or do you follow classes in real life? Also thank you very much, you are going to help me pass my second exam!

[@romeroc24]

frageater16 thank you for all your support, yes all is for netacad and real lab too.

[@zizizineb8722]

THanksssssssssssss

[@romeroc24]

Thanks to you

[@razackoued8004]

Thanks

[@romeroc24]

thanks to you