Thanks Eric, I always enjoy watching your videos and have learnt much from them. I like the tip for marking bolt hole in body. however, I tend to use 2 bolts, and drill body first then take the brad point drill bit and push through hole from inside the body to mark the neck, this is also very accurate, and works well for me
@CMRWoodworks Жыл бұрын
Good stuff!
@robertnewell5057 Жыл бұрын
Excellent, Eric.Great detail with nothing assumed. Thanks
@dalgguitars Жыл бұрын
Great tips, thanks Eric. love, love, love the pointy bolt tip!
@davidharris7431 Жыл бұрын
Hey Eric , I set the neck on my first build without the fretboard attached . Needless to say my guitar looked great with a trapeze end piece and floating bridge .....
@bpower6362 Жыл бұрын
Love the tip with making a center punch from a spare bolt to find the hole location. I am going to use that tip. Seems so simple after the fact. Thank you Eric. :)
@walterrider9600 Жыл бұрын
thank you Eric. i want to thank you for all the info you put out . through out my life i all ways tried to pass on the info i had not fearing someone would be better or as good as myself . where as a machinist or a electronics tech . i never worried about that. i can tell you questions about something you knew would revel who you could trust about good info. You good sir share, a true gem in the world.
@jimnoakes9394 Жыл бұрын
Thank you Eric
@mattkennedy2470 Жыл бұрын
Hey Eric. Great video as always. How do you decide between your approach to tilting the neck vs removing material from the tenon and using shims to shift the neck side to side?
@stevecarver4906 Жыл бұрын
I've always used two bolts obviously one is enough cool!