80 Chevy Silverado Front Axle Disassembly Dana 44

Getting the Dana 44 from the 80 Chevy Silverado disassembled.
Donate to Help me create content: www.paypal.com/donate/?hosted...
Things that might help with a project like this:
Spindle Nut Socket: amzn.to/3TVxmRm
Small Torch: amzn.to/3ZmewDR
1 1/8" Socket: amzn.to/40ByE64
Seal Puller: amzn.to/42H9JQg
Ball Joint Press: amzn.to/42IgPUW
Universal Joint Sockets: amzn.to/3ZWsZHQ
Skyjacker Lift Kit: amzn.to/3YYqvaH
POR15: amzn.to/3ZzYmYD
Paint Gun: amzn.to/3YwQUMr
Pressure Blaster: amzn.to/41Qz7D0
AirCat Grinder: amzn.to/3IOP185
Blasting Cabinet: amzn.to/3mckf1m
Blasting Cabinet Dust Collector: amzn.to/3ZqjmR6
This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/reakt-music/deep...
License code: 8YOOEELQ1SABC9HW

[@mossman381]

Donate to Help me create content: www.paypal.com/donate/?hosted_button_id=HEEM93RHSHE92 Things that might help with a project like this: Spindle Nut Socket: amzn.to/3TVxmRm Small Torch: amzn.to/3ZmewDR 1 1/8" Socket: amzn.to/40ByE64 Seal Puller: amzn.to/42H9JQg Ball Joint Press: amzn.to/42IgPUW Universal Joint Sockets: amzn.to/3ZWsZHQ Skyjacker Lift Kit: amzn.to/3YYqvaH POR15: amzn.to/3ZzYmYD Paint Gun: amzn.to/3YwQUMr Pressure Blaster: amzn.to/41Qz7D0 AirCat Grinder: amzn.to/3IOP185 Blasting Cabinet: amzn.to/3mckf1m Blasting Cabinet Dust Collector: amzn.to/3ZqjmR6 This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

[@bryanbylbie7707]

Awesome! Thanks for longer videos!

[@mossman381]

Glad you like them!

[@clintpike9983]

What size spindle socket is that for the hubs

[@farmboy30117]

It definitely has had some hard use. Rockauto has the vent piece you need.

[@mossman381]

Maybe some rock crawling in Colorado. I actually tapped that vent hole for 1/8" pipe thread and have a fitting to go in it.

[@orinadolf1928]

Can you post the part numbers for seals and bearings? Currently rebuilding the same axle but I can’t find the spindle bearing and that seal behind the spindle besides a kit of all 3 for a couple hundred bucks

[@mossman381]

I believe I have part numbers in the assembly video for most parts. I don't have them written down anywhere.

[@honda90084]

What did you do about the vent hole? Just put a dana 44 in an I have no vent tube coming out of the housing as well.

[@mossman381]

Check out my assembly video. I show the vent and what I did for a nipple.

[@brettwalker5318]

Sticking with the 3.07's?

[@mossman381]

Yes, should make a good cruiser. The big block should have good low end torque to help.

[@NDB390]

Vent tube is wide open taking in water.

[@mossman381]

Figured that out.

[@NDB390]

@@mossman381 Yeah sorry, commented before I watched the whole video.

[@mossman381]

@@NDB390 That's ok

[@brettls2]

I came to see how the outer seals go in, you didn't show any of that.

[@mossman381]

I don't know what outer seals you are talking about. Why would I put a seal in on a disassembly video???

[@Goinbig]

They go in the way they come out