80 Series Land Cruiser DIY drawer system **DETAILED**

80 Series Land Cruiser DIY drawer system DETAILED

Рет қаралды 11,320

Adv4x4

Күн бұрын

Пікірлер: 50

@loicleray 10 ай бұрын

Criminally underrated. Love this series. Keep 'em coming!

@Adv4x4 10 ай бұрын

Thanks man!!

@Agentloot5 3 ай бұрын

So awesome. Been planning to build a drawer for a while and this inspired me! Put in the order for all the TNUTZ stuff and got the same carpet as well. Expensive but hopefully can use the leftover for other projects down the line. Thanks for documenting all of this so well. Glad to have all the pieces measured perfectly so I do not end up with a lopsided drawer that only slides halfway decent.

@DuanDao 11 ай бұрын

Really great walk through. Been wanting to do this on my 100 series but wasn’t sure how to go about it. Thanks for the video

@Adv4x4 11 ай бұрын

Thanks for watching!

@jeffblahblah5226 4 ай бұрын

Top job mate! Watching you from New Zealand

@drzero9360 6 ай бұрын

thanks for posting the drawer build plans

@calneitz3681 3 ай бұрын

Nice video,good job on your project also. I am planning a build with my jeep and you showed me some great tips thank you.

@mikemorgan4670 Жыл бұрын

Great work Buddy. Always a pleasure watching your content. Small suggestion, using an artists canvas stretcher might help in getting a nice taught carpet install.

@Adv4x4 Жыл бұрын

Thanks Mike! Not a bad idea at all!

@GlenReed 2 ай бұрын

Thanks for sharing! Do you have a link for the adjustable storage crates you show @ 29:20? I can’t seem to find them online.

@Phoeff99 Жыл бұрын

(And not calling you out but in case people need that hardware to bolt the slides to the drawers they are “1/2” long #8 machine screws” The “32” refers to the threads per inch and is only specified because some sizes can have both a coarse and fine thread option . “8/32” would just be 1/4” and these are certainly thinner than that. 😊 looks awesome man. Great work; very clean and professional.

@Adv4x4 Жыл бұрын

Thank you! I definitely missed that in my rambling while editing 😂

@Keasbeysknight Жыл бұрын

Great video and excellent build quality. that extruded stuff is super cool but it sure is expensive! i bet you saved alot on weight though.

@Adv4x4 Жыл бұрын

Thanks man! It really is awesome stuff to build with. The extrusion itself isn’t too badly priced they get you on the corner connectors and hardware! Haha.

@TheCajunGaijin 9 ай бұрын

Putting aluminum angle iron across the front would protect the front edge from the carpet being torn off, and would also hide that black bracket for the lock. I wonder if it's not easy enough to incorporate a base plate into the bottom. Then you could mount that baseplate to the third row mounting points instead of having to use the turnbuckles. Could just screw the baseplate to the metal the same way the top was. It would become pretty heavy that way though I guess. This is very interesting though and seems easy and approachable enough that even I could do it. I'll probably do something similar in my 80. I just shared the video with a buddy who has way more wood working tools than I do. We'll have to see about replicating this.

@Adv4x4 8 ай бұрын

Nice!! I actually didn’t mind the bracket I could have put it under the carpet as well! That’s a good idea for the aluminum angle though! Goodluck with your build thanks for watching!

@AusxStylez 3 ай бұрын

When you installed the drawers into your 80 series did you mount it down or does it just lift in and out of the car?

@Jonboy4371 Жыл бұрын

What’s the software you’re using ? Also how did you implement the 80/20 into that software?

@Adv4x4 Жыл бұрын

Shapr3d on IPad! I had to physically draw the extrusion unfortunately

@AbstonsGarage 9 ай бұрын

Can you share the file?

@sisch1 Жыл бұрын

Awesome video and drawer system. I’ve been wanting to do something like this for my 80 series (94)I just bought. I’d love to see some build plans. I was looking at some already built systems and no one has anythingfor the 80 series. Although I could make them work with some modification I’d like to build one to its specific storage space. would you be willing to let us know about how mch time and money you have in it? I’m happy I found your channel you have a lot of good stuff for someone like me who needs to restore an 80 series Land Cruiser.

@Adv4x4 Жыл бұрын

Thanks man! I need to sit down and total it all up! Time wise is hard to judge as I worked on it as I could when I wasn’t at work. Appreciate you watching!!

@TheCajunGaijin 9 ай бұрын

There are quite a few drawer systems out there for the 80. Just depends on how complex you want it. It's sad some of the simpler ones aren't made anymore. But if you want one that the pricepoint/value seems to intersect at a good point then look up AirUpGearDown. Or perhaps SHW ultralite.

@Johno530 6 ай бұрын

Another awesome storage system build! Do you have a source on where you got the cad models for the 3d program?

@Adv4x4 5 ай бұрын

I made it myself based off extrusion spec sheet!

@AbstonsGarage 9 ай бұрын

This is awesome.. how did you get the 80/20 in shapr3d?

@TheKoreanMarksman Жыл бұрын

Wondering what the length is for the 2 extrusions that connect the 3 sides together?

@Adv4x4 Жыл бұрын

Sorry about that! 19 1/4” each! Thanks for pointing it out.

@viktordekeyser5727 8 ай бұрын

Hey man! cool build! What floor mats do you use in the rear of the 80?

@Adv4x4 8 ай бұрын

Thanks man! Weather tech!

@Phoeff99 Жыл бұрын

Haven’t been keeping up with your videos lately but is that shiny wedding ring, new? Was she your wife when you did the first camper?! Either way congrats!! 🎉🎉

@Adv4x4 Жыл бұрын

Thank you!! We got married in October of 2022! Have been together for 7 years in all though!

@Phoeff99 Жыл бұрын

Must have missed that detail before; don’t think I’ve been away that long! anyway, congrats.

@kjun80cruzer92 Жыл бұрын

What app are you using for 3D design? Really dig the build btw! I’d forgotten about the 80/20 and was about to build the whole thing of plywood lol

@Adv4x4 Жыл бұрын

Thanks man!! I’m using Shapr3d! I love 80/20 extrusion. It’s on the expensive side. But to me the rigidity of it is worth it. Not to mention your frame will be perfectly square for your drawers which helps a ton in the smoothness of their operation.

@kjun80cruzer92 Жыл бұрын

@@Adv4x4 yeah it’s great stuff, and the weight savings too!