80cc Micargi Hero ’Skyfall’ Motorized Bike with Build Commentary by Southern Custom CC

Here is the 80cc ’Skyfall’ Micargi Hero 20 inch low rider cruiser motorized bike with build notes and commentary. The rear torque is insane until about 15-20 mph because of the smaller 20” tire and 44t sprocket
(P.S. Did you catch the outtake? Lol! Caught me off guard!!)
Thanks for watching and be sure to like and subscribe!

[@dekem7137]

Gorgeous bike! Love the mini ape bars & banana seat. If I build a second one this will be it. Although I wish they'd put out a larger model with everything being a touch bigger (specifically the tires, even 24 would be nice).

[@jakelang4387]

i love that man i just found a low rider trike out of the landfill..im gona make it a two wheel bike agin and do what your doing..its really old but tires hold air

[@alexrrr1887]

amazing build! TY much for sharing!

[@esesoke]

Your camera catches super vibrations 😆

[@JorgeRodriguez-ei2gi]

Great videos, iam tunes & suscribe, i hope pretty soon a video step by step on your hero skyfall low rider built, thanks, from panama, joe.

[@christophermendoza9391]

Is it true about the weight that you have to be 120 lbs to used

[@GratefulEd907]

Doing this with an old 20” firestone warrior frame from the 60s. Parts are on the way.

[@SouthernCustomCC]

Sounds sweet! Hope it works out! Happy building.

[@MrThatnativeguy]

Great video and nice bike , it looks like the miniature version of mine.

[@mojosmindfield]

where did you find the rim brakes for that application?

[@ChillInspirationHub]

Hello . Where did you found the seat

[@diydarkmatter]

hmm i been wanting to do this to my lowrider . its pretty low to the ground and i have to use the smallest crank arms made to pedal it. but its a low rider lol it is 20" with a 26 " raked springer fork in the front . the frame i used is a mohawk frame from early 50s or 60s i could not find any info on it seeing how the company dont exist any more . but it wont work for this any way the bottom down tube in the frame swoops upwards not like the Schwinn stingrays . but i have a Dayton back rim on it not sure if i could bolt up to it or not . and its a 20 " bike . now i was under the idea that the frame had to be 24" or up to use one of these kit bike engines what mods did you do to use a 20 " frame?

[@iplaymytele]

I really like the music....🎵❤️🎶

[@SuperAndybarrett]

As the fender shakes off

[@JorgeRodriguez-ei2gi]

This si a great built iam still tuned to see your step bye step built on that #20 rims bike ,hope pretty sion You show us that vídeo ,thanks,suscribe ,Say hello ,Joe & Bros.

[@b-ill2195]

Awesome are those forks safe I've heard sevral ppl say no but Great build I was considering getting some Forks like that myself

[@SFVMotobike]

They’re fine man. Just add lock nuts

[@nickmarks386]

you have to paint your carb cover to look like the skull it is lol

[@JoseValdez-gf8sb]

I recently bought a micargu f4 lowrider bike myself ,but was it easy to put the chain disc on the back tire and did it fit well ? Would love to Know I plan to put a motor on mine for a daily commute.

[@thfpv4974]

Yo did you ever built that f4 ?

[@hotrod40hec1]

Im building one now im having problems with the muffler it touches the floor

[@SouthernCustomCC]

With the Hero? It shouldn't touch. Are you using the front engine mount adaptor? You should have clearance. If you don't want to adjust your engine, then you can chop your exhaust with a hacksaw or metal miter, or you can always purchase tie F2 thruster exhaust.

[@jonreeves9307]

Could you put a zt phantom 85 on one of these?

[@SouthernCustomCC]

I personally don’t like the phantoms. I haven’t tried, sorry. I doubt it would fit thougj.

[@revenantandco5103]

no problem with two passengers?

[@andyy_glxx381]

I have the same bike but my chain broke what type of chain is it lmk

[@SouthernCustomCC]

Thanks for watching! The bike chain is a basic, single speed speed chain from Walmart. The motor chain is a 415. Don’t forget to have a chain breaker that fits whichever chain you are looking at replacing. Happy building.

[@Littleevil9975]

Sweet bike mine is like that but a little different than yours

[@orbytshmo]

Could you please link what front brake you used?? I can't find a 110mm front brake anywhere. Please help me out!! Love the content btw

[@SouthernCustomCC]

Hey! Not sure if your looking for chrome or black, but just go to eBay and search ’beach cruiser front brake’ and you will see the wider front brakes that will clear front fenders. Reach is not as important...just width. A 102mm reach would work. Hope this helps!

[@orbytshmo]

@@SouthernCustomCC Thank you so much man, I'll look around on ebay

[@xB1GMART1Nx]

What’s the name of the song in the video?

[@faslas789]

Use Shazam

[@sulaimaanhr6982]

What brakes is on it can i get the link?

[@SouthernCustomCC]

They are cruiser front brakes with a 100-110mm reach. They are harder to find now. I don't have a link, sorry.

[@simsum1argh882]

Where's the micargi

[@ibt222]

Someone hit me up about hack tricks to make it go a tad bit faster

[@adaelm425]

Gearing, better carburetor, reed valves, high compression heads, but the biggest one is a real tuned expansion chamber, and not the bikeberry banana one. You want an mz65 expansion chamber

[@SouthernCustomCC]

Ibt22: To this specific bike, or to any setup?

[@ibt222]

@@SouthernCustomCC i have lowrider f4 but im still waiting for my engine to get here

[@SouthernCustomCC]

ibt222 : with the f4 you’ll have to address the sprocket fitting on the rear tire with all of the spokes that bike has. You may want to consider the cnc 36t rear sprocket for more top end.

[@ibt222]

Honestly exactly what yall said is exactly what we are running into so i have put up a lil extra loot. What i thought would be my first lil cute fun build is sucking the live out of me during covid -19 / blm . My bank account is starting to matter. All i wanted to do was look cute in my 40s. Its taking way more loot than i thought. But i am starting to learn how to turn a wrench!

[@mbrrideitlikeyoustoleit8436]

This bike is going to kill somebody with those fenders rattle like that you can't leave them rattle in loose like that somebody will get hurt or killed

[@SouthernCustomCC]

All fenders are put on for display, but removed and sold installed. Buyer is warned and advised against reinstalling them. I 100% agree.

[@southlandgasbikes5124]

Looks like you need to go over a couple of nuts and bolts on that thing before it rattles apart

[@eduardodiaz5762]

I don't mean to sound like I'm a hater, but all your bikes use the same Chinese HT motors. Id like to see you use a 49cc 2 stroke ktm or even a CR dirtbike motor Now that is a Motorized bike, those things can hit 75mph... These Chinese knockoffs barley hit 35, with slight modding you can hit 45mph tops.

[@eduardodiaz5762]

Nice Bike though, not a hater just want you to start building the real motors. Again Great Bike build!

[@SouthernCustomCC]

Hey Eduardo!: Thanks for continually being a part of the community! That is exactly the reason why I like these Chinese motors! If I wanted to go fast, I would just ride a motorcycle. These bikes...even the gasbikes with the tank in the frame aren't made for those type of engines. By the time you set the bike up to be safe enough for such a strong engine and those whisker blowing speeds, title, registration, DMV weekdays, and $$$ you have spent as much as you would have for a motorcycle. I like the cruising speeds these bikes offer @ 40ish for only a few hundred bucks. The goal is to find out how to make these knockoffs perform as best they can with the limits the engine has. I throw something new in the channel every now and again just for you! Thanks again!

[@daddycausey5471]

@@SouthernCustomCC Safe enough..😅🤣🤣🤣😅😅 I don't think that's what we're shooting for boss.

[@jorgegomez9032]

That’s not a 80cc sorry bro