80MPH on a Stock Internal 2022 SeaDoo RXPX with a Calas Performance Stage 1 PLUS PLUS Package

Today we install a Stage 1 plus plus package on a Bone Stock 2022 Sea-Doo RXP-X. lets see if we can hit 80mph on a stock jetski
Let see wha happen!
Be sure to follow me on
IG - / calasperformance
FB - / calasperformance
www.tiktok.com...
Calas Performance www.calasperfo...
Check out DDR Performance
ddrperformance...
Check out the fizzle factory
www.fizzlefact...
#calasperformance
#DDRMarine
#seadoo
#pwc
#jetski
#jetskiwordcup
#jetskiworldseries
Director/Video Editor/Producer
Dessie Vizcaino

[@k9sgarage301]

We need more install videos. Valves, retainers and cam 🙌🏻

[@theone0070]

Great video more of this style.

[@bonzai5050]

He fast Man super your video tell to your customer you give him stage ONE end reach 80 mille stock engine WOWWOW

[@Reinderss]

Forgot to film: springs/retainers, ribbon delete and adjust supercharger slip. Still liked the video:)!

[@nikkojones2784]

Sacrificial Anode to prevent electrolysis between the different alloys.👍

[@theoddjobs3749]

the piece is called a sacrificial anode, and they are used for cathodic protection, usually made of magnesium aluminium and zinc, great video as always

[@Vanbooskie]

New here, I already love it!!!

[@tiptoplandsolutions1421]

Lets go to work !!🤠 That owner of that ski is a "brake ya buy it " type dude..Well, atleast he's happy..🏖🛟⌛️

[@raymondanderson9020]

o cavitation no pop pop out the exaust love it.

[@jeffreylonghr]

This is exactly what we did and some extra and watercraft journal said we don't recommend lol And I said that's why we got 85MPH ! lol! I didn't have retainers because I let go of throttle out of the water and 8350RPMs. PS my catch can was a Monster energy can and i used stock prop bent. and some minor custom things ;>

[@jeffreylonghr]

Trim the wings in the back ;> 0.5-1 mPH

[@jeffreylonghr]

SS wear ring

[@joeanthony7942]

Awesome video!!

[@LSDdreams808]

110 mph is fast on my snowmobile 80 mpb would be crazy on on a jet ski

[@DessiLu14]

Imagine 135mph on a jetski. That is the current world record.

[@AVS37]

🔥🔥🔥🔥

[@meee4233]

Fearless!!!! love the videos

[@gregnowling3128]

ANODE !

[@raymondanderson9020]

very nice work.

[@karmariderdl]

Good job!

[@davidbalan6571]

Well done it's very good for me to this channels . When I having a Job's worked as ♎ government with allowance 🏠 singles storey corner rm600 and buying a Toyota's Hilux RM 98,889 and also buying JetSki Sea Doo RX300 at Montarey Watercraft Enterprise Kuching Sarawak's Jalan Penrissen with price RM 86, 999 , Town Sri Aman Simanggang Kuching Sarawak's rm 43 ,000 and also Kawasaki Ultra JetSki 610 LX-5 with prices RM 72 ,896 .

[@alexsierra2213]

me encantan tus videos pero es una pena no poder ver cómo instalas las piezas y los pasos que sigues 🙌🙌🙌🙌🙌🙌🙌🙌

[@MikeZ32TT]

Nice

[@alejandroquiroga3724]

Ernesto i need to take my 2023 rxtx to you for stage 1

[@DessiLu14]

Get that stage 1 plus plus .

[@alejandroquiroga3724]

Let me know when you are free

[@HayPOWER-PR]

💪🏼💪🏼👍

[@ChardyboyMotovlog]

Calas + aldawas = champion 🎉 🎉 🎉

[@ttb.adriannn]

15:06 that’s my dad💀

[@centurionkvc]

Great info

[@gsxjiffy6076]

No blow off valve? Thought that would be a must have with the amount of work you are doing?

[@JSuggs86]

yamaha for the win though more speed without springs and retainers or a prop

[@DessiLu14]

Does it do 80 stock tho?

[@Vikturus2k6]

Idk, I see guys tuned 1800s running 81. Stage 2 rxp is like 85+ lol

[@spacklerat3214]

Yoooooo! This was the video I was Looking For!! How can I get you to Install this on my 23 rxpx apex. This is exactly how I ride and I blew my motor and supercharger up at 21 hours this time I want to make sure that never happens again!

[@calasworld]

@@spacklerat3214 reach out to us

[@captaint4587]

He will get the itch and slap a big turbo on it with a built motor.

[@christofferandersson1653]

Hi just find your chanel, and love it. I have a GTX 230 2021 stock what do you recommend i want more top speed. I'm riding on the outer coastal sea. jumping and so on. and don´t want to spend too much.

[@calasworld]

My best advice is to keep it stock

[@kuonix]

Which DDR Performance air intake model do you use exactly?

[@davitiakobia7604]

how many liters of oil will fit into the engine of a seadoo RXP-X 300 2019???

[@derargentinier8879]

Que buenos consejos ! En cada video se aprende algo nuevo !gracias calas campeón 🏆👏

[@imagineno3496]

Do you need a tune for an intake alone? I read somewhere there's a chance it would run lean.

[@calasworld]

No

[@imagineno3496]

@@calasworld thank you! Keep up the good content

[@AdamOpheim]

What RPM and how much boost did it make?

[@jrg4435]

Calas,CUÁL ES TU OPINIÓN DEL KAWASAKI ULTRA 2014 ,EN LO MECÁNICO?NO ES EL TEMA,Y ERES SEA DOO, PERO QUIÉN MEJOR QUE TÚ PARA opinar..Gracias 😁

[@calasworld]

En west Palm Beach Fl tengo un amigo que es macanico de Kawasaki

[@jrg4435]

Gracias

[@bayarearacing8950]

So what’s going on with the 22s ? I have retainers done on mine and custom map , only doing 79 on dash I have about the same parts

[@calasworld]

The one that I have worked on the exhaust valves are leaking and that my be a loss of power

[@milestone_media]

If you don’t have the same tune as what he is running you will see different speeds as the timing and fueling is different also could have a lower rpm limiter also if you don’t have a impeller that’s also going to be something Next is how much do you weigh?

[@sir.leonqq3569]

Where is the ramp?

[@calasworld]

West Palm Beach Florida

[@trishanugent6217]

Where's Justin?

[@DessiLu14]

Coconuts?

[@mugyn1947]

make a yamaha

[@franktedeschi5331]

Do you pull the head off to do the springs and retainers

[@calasworld]

No

[@calasworld]

There is a special tools that you can use they’re not expensive and you can do it yourself and I also recommend to get the cam and crank locking tools

[@franktedeschi5331]

I’m sorry to keep commenting I know you’re very busy man. And I really appreciate all your feedback. Do you feel it’s worth doing cam, retainers springs, and the upgraded supercharger and intercooler on a 215 07 gtx. Or should I just wait to get a 300 eventually

[@franktedeschi5331]

All right last comment. Sorry. I really want to do the 215 to 260 upgrade I see about 4 different company’s out there that offer all different configurations to make that happen. I would love to speak to you about it. I live in New York so I have probably about another month of riding maybe 2 tops. Then it’s time to pull the motor. Would that be ok to give you a call and go over some things when my Season ends. I love that your friends with frizzle seeing him in your videos makes me feel like I’m buying parts from people not some huge corporation

[@xzavierholmes7169]

So what part is making the ski get to 80 mph it can't be upgraded hoses, so is it the air intake and the computer

[@xzavierholmes7169]

You never answer the question

[@Jetwaterrunnerfeller]

The air intake to add more air, the computer update to add more fuel and RPMs, the impeller to make better use of RPMs. That is “stage 1”.

[@garymealey4464]

How much does a stage 1 cost

[@terpsquirter7107]

just got a gp1800r svho ribbon delete 8300rpm tune cold air intake and im hitting 81...

[@Vikturus2k6]

Rxp with same is mid 80s. Buddy has tuned with intake and does 83-84 all day.

[@terpsquirter7107]

@@Vikturus2k6 lol the fastest doos don’t touch yamis hydrdrags are full of nothing but fzrs and gps the seapoos have their own class of slow 😂literally don’t even compete with the Yamahas cause they can’t

[@jetskiangel]

More oil order videos 2021 I find the bottom of the engine with oil, what could it be?

[@calasworld]

Can you be more specific?

[@jetskiangel]

@@calasworld Whenever I use the 2021 Sea Doo the next day I check it and I feel oil an water on the bottom

[@jetskiangel]

@@calasworld I've taken it to the dealer 2 times and they tell me it's normal but I don't believe it

[@calasworld]

No that it not normal. It could be many things… it could be the bearing where the driveshaft goes into the motor.. it could be the oil rings in the oil cooler…it could be the valve cover gasket… it could be any of the sensors or plugs… it could be a lot of things🤷‍♂️