87-89 TOYOTA PICKUP/4RUNNER LED DASH LIGHT SWAP

How to install LED bulbs in your Toyota pickup or 4runner gauge cluster.
you can find the bulbs here
www.superbrightleds.com/

[@RichardRubicamPhotographer]

I wanted to brighten my speedometer for years but afraid I'd have to spend hours tearing apart the dash to replace the bulbs. After viewing your video I tackled the project. I wish I knew before how easy it would be. Knowledge is power. It was helpful to loosen up the speedometer cable before removal of the instrument panel. Thank you!

[@archaicautomotive2444]

Awesome man! Glad this video helped you out!!! And yeah the speedometer is the most tricky part. I always would try to cram my hand back there before I discovered it was way easier to take a little more time and just loosen the thing up. 😂😅

[@zachoman74]

Used this to replace some dash bulbs in my 86 pickup! Thanks mate!

[@archaicautomotive2444]

Glad it helped

[@superbrightleds]

Excellent tutorial! Short and to the point. And I might say, your new lights look quite dashing! 😜 Thanks for tagging us. Appreciate the love!

[@beaunerh8478]

Great video, thanks for sharing your info!

[@archaicautomotive2444]

Thank you! Glad it helps That's the reason I keep making these videos.

[@bones3915]

Thanks

[@archaicautomotive2444]

Glad it helps!

[@blainerohlfs]

Where did you get that SWEET switch bank that goes in the cruse control spot! I need to get me one of those

[@archaicautomotive2444]

Hahaha the previous owner of my truck did it. He popped out the spot in the dash where the cruise control switch would be and then wedged a few rocker switches together. fits really well. Here's the switches or you can find the multi colors at the auto parts stores like orileys. www.amazon.com/TWTADE-Illuminated-Position-Assurance-Years%EF%BC%89XW-604BA1/dp/B07HHV2PD4/ref=mp_s_a_1_39_sspa?crid=1EYB6VJTV8XB8&keywords=12v+rocker+switch&qid=1667728674&sprefix=12v+rocker+sw%2Caps%2C513&sr=8-39-spons&psc=1

[@blainerohlfs]

@@archaicautomotive2444 dang, it fits so perfect, might have to try it! thanks!

[@13LuciusArchangel]

Good video! I recently changed my gauge lights to red as well. Quick question though: the gas light that turns on when you have low fuel for some reason stays on and won't turn off even with a full tank and that didn't happen before I switched the lights.. Anyone have any idea why?

[@archaicautomotive2444]

Did you happen to replace that bulb for the gas light with an LED?

[@13LuciusArchangel]

@@archaicautomotive2444yes, I replaced all of those with new ones

[@archaicautomotive2444]

@@13LuciusArchangel I'm guessing the gas light works off resistance from the sending unit. LEDs have little resistance so you might have to replace that one with a conventional bulb for it to work properly.

[@jorgeguerrero5478]

Hey i wanted to know if u can help me out and let me know where i can order the bulbs im not sure what kind those are

[@archaicautomotive2444]

Yes check out superbrightleds.com The bulb number is 194/168.

[@xC-od8js]

I did exactly this except with white led but when I turn them on there green is there a film I don’t know about?

[@archaicautomotive2444]

There shouldn't be.... The factory bulbs just have a green cover over them.

[@xC-od8js]

@@archaicautomotive2444 interesting I replaced like 6 in total I still see green appreciate the reply imma open it up and check it out

[@heraclioperez1004]

Is the a fuse connected to the cluster

[@archaicautomotive2444]

Yes there is It's the fuse labeled as "TAIL" in the fuse box under the dash. If that's good you most likely want to look into the tail light relay or the rheostat for the dimmer.