88-97 Nissan D21 Spark Plug & Spark Plug Wire Replacement and S13 240SX

[@kentcrawford7080]

Good video thanks I'm going to replace the ones on my red 93 single cab D21

[@benitezgranad0s979]

Could you share a couple of photos with me how to connect the vasio hoses?

[@petersumstine6973]

Thank you, video was very helpful

[@carlosashby3375]

Great video brother, gonna help me a lot 💪

[@isaacchincio]

Howzit bro how tight you wen tighten the spark plugs ?

[@SamuelBullock-jw5pu]

So doesn’t the 24 have an exhaust side and intake side?

[@ToddJDM]

Super helpful for my 240 maintenance video comin up🔥

[@weekendhomeprojects]

My '95 has that same startup rattle.

[@gabrielportillo8660]

Thx 👍🏼

[@MrSmokeingood]

You should replace the distributor cap and rotor at the same time

[@curtfox91]

I actually Replaced both already

[@matthewmurdock1897]

Is there anything you have to do before replacing distributor cap and rotor or just take it off and change? I have new spark plugs in mine I’m thinking about replacing wires and ignition coil tomorrow since there all original to just have some new stuff on the truck mine is a 95 ka24e pickup. Also I’ve been having some acceleration issues lately sometimes it gets up and goes sometime it lacks power and idk why? No cel so anything helps. Btw it has 106,000 miles on it

[@Christianrreyes]

@@curtfox91 Can you link the replacement rotor and cap

[@Senormanzo]

Whats that noise when you first start it up mine does the same thing lol

[@curtfox91]

Timing Chain rattle it happens on all of these. Its cause oil has not made it to the chain yet once its lubricated it stops.

[@Senormanzo]

Curtis Fox91 okay cause I have my one a 1.50 inch lift just in the front hope that doesn’t effect for it gets oil

[@curtfox91]

I dont think it would.

[@weekendhomeprojects]

@@curtfox91 I got the same on my '95

[@dillzkanahele5290]

@@weekendhomeprojects replace it b4 it cost u a motor

[@nation4886]

Badass

[@maurisiolopez3290]

For those spark plugs you should have of made sure they were calibrated to the correct I believe should be .044 sometimes they say they come calibrated but they really don’t & just buying them and putting them on jst like that no good cuz if it ain’t calibrated right it they won’t function properly or it’ll jst get worse instead

[@curtfox91]

Those NGK Plugs come Gapped you can check with a Gap tool to see. If you use a different brand that maybe a different case but i never had an issue been using the same plugs for Years and Years.

[@mariealv4888]

Leave the birs alone ,the learning like me.

[@shaniking17]

Bro the spark plugs looks fake to me. The original have a plastic cap instead of the cardboard paper cap

[@curtfox91]

Im sorry but this is a Dumb comment if your serious. Lol i cant with you guys