What's on the Bench! Ep5

  Рет қаралды 45,078

Scale Builder's Guild

Scale Builder's Guild

Күн бұрын

Пікірлер: 257
@turksandjerps
@turksandjerps 5 жыл бұрын
I don’t like any of those trucks
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
This things I believe.
@mikes062
@mikes062 5 жыл бұрын
They don’t like you either mr b00b
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
mike s he’s making a joke. He’s the other half of the SBG.
@mikes062
@mikes062 5 жыл бұрын
Scale Builder's Guild I know...lol
@datsun4x
@datsun4x 5 жыл бұрын
Impossible. Can't be noob, he spelled Turks wrong
@brianbeck7468
@brianbeck7468 5 жыл бұрын
Super stoked to see the CC01, and I totally agree with you on the building experience of Tamiya kits. The fit and finish is always great with Tamiya.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Always fun with Tamiya!
@RandomStuffGarage619
@RandomStuffGarage619 5 жыл бұрын
Not to mention, with the cc02 poised to (hopefully not) replace the cc01... Better get am while you can!!! That cc02 is so much FACEPALM and zero tacos.
@ReadySetRC
@ReadySetRC 5 жыл бұрын
Can't say how much I look forward to these videos. Thanks for the updates, Matt. Can't wait until next month's episode👍
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks so much for watching!
@rcbloke1766
@rcbloke1766 5 жыл бұрын
Awesome work
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks!
@jamesd8193
@jamesd8193 5 жыл бұрын
Looks so good
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Cheers!
@robertmartin4135
@robertmartin4135 5 жыл бұрын
very nice work! Could you show the vehicles you base your rigs on? If not side by side, at least a picture to compare?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Of course Robert, go back to previous episodes, I’ve shown the references.
@robertmartin4135
@robertmartin4135 5 жыл бұрын
@@scalebuildersguild Ah, missed them. I'll check them out. I love your Vids!
@mikehogan27
@mikehogan27 5 жыл бұрын
Thanks for sharing your projects.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Happy to!
@001002ish
@001002ish 5 жыл бұрын
Great video. You do some great work.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Cheers!
@TuxStang
@TuxStang 5 жыл бұрын
Nice work, like the cage on the Comanche. Can't wait for your Isuzu build.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I'm keeping it very stock, just good to have one again!
@TuxStang
@TuxStang 5 жыл бұрын
That's what I planned when I got mine and it already has 3d printed side steppers, lower link mounts and stroke extensions. FIY, Loops plans to release clear windows for the Isuzu for the end of the year.
@gerrysoldguyreview
@gerrysoldguyreview 5 жыл бұрын
Great again Mr Matt has motivated me to spend all Saturday in the shop trying to catch up on my builds!!! Love the video
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Nice! It worked! Shrug off those responsibilities!
@tomandrews5392
@tomandrews5392 5 жыл бұрын
Great information about your builds ...keep up the great content...
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Will do, thanks!
@yeahright671
@yeahright671 5 жыл бұрын
Absolutely amazing work. Keep it up.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha ha, thanks!
@STP_RIDGELINE
@STP_RIDGELINE 5 жыл бұрын
AWESOME MI BIG BRO YOU GAVE ME INSPIRATION NOT PERSPIRATION HA LOL🤣🤣🤣🤣 I WORKING ON AN SCX24, RC4WD TF2 86 CHEVY AND AN GEN 8 BUILDERS KIT GOING WITH AN RC4WD TOYOTA 4RUNNER BODY THANKS LUV YOUR SHOWS YOU NEVER DISAPPOINT!!! 😀🤙🇺🇸💜💯♻️
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks my man!
@STP_RIDGELINE
@STP_RIDGELINE 5 жыл бұрын
I luv Josh's vids also but he's exactly like listening to my lil brother so technical they almost sound like a robot can't really follow that I can relate with you mi big bro dont ever stop making vids you really keep me going when I just wanna Quict it all Thanks Matt 😀🤙🇺🇸💜💯♻️
@danielemulazzi7309
@danielemulazzi7309 5 жыл бұрын
Stupendo !!!...complimenti! !!...bravo !!!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Grazie!
@fredrieger5226
@fredrieger5226 5 жыл бұрын
I really enjoy this series, great builds, lots of ideas and inspirations! The thumbs down people should take those thumbs and stick the where the sun don't shine! 👍
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha, hater's gonna hate!
@davidspinney7344
@davidspinney7344 5 жыл бұрын
I'm very impressed sir that is a really clean brazing job!! Love the finished look.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks!!
@htimsrM
@htimsrM 5 жыл бұрын
Thanks for the vid...reminds me of being excited for Saturday morning cartoons!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Hahha, thanks Raymond!
@carternevill
@carternevill 5 жыл бұрын
I love it😍🔥👍
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thank you!
@jonredcorn862
@jonredcorn862 4 жыл бұрын
That comanche is so, so sick.
@TheWright1
@TheWright1 5 жыл бұрын
If you need shelf space, I would be glad to take that Comanche off your hands! Haha! By far one of my favorites!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha, I'll keep that in mind.
@ickypowwow6635
@ickypowwow6635 4 жыл бұрын
please do another video on the scx24 I love it
@RyanRC1
@RyanRC1 5 жыл бұрын
Great build ! Thanks for the shout out !
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks!
@kennethwelty1190
@kennethwelty1190 5 жыл бұрын
About time you go another Tamaya kit I just finished a Suberu Brat Blue kit. My first kit was a BMW Touring car still have it.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Amazing!
@thegamingguy4332
@thegamingguy4332 5 жыл бұрын
How do you mount the toyota body
@braddahdussifyoumuss596
@braddahdussifyoumuss596 5 жыл бұрын
That lil truck does look some of the truck we have here on the islands lol
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Sweet!
@johnhouston8297
@johnhouston8297 4 жыл бұрын
You really put your foot in these RC builds!
@danaclarke9664
@danaclarke9664 5 жыл бұрын
Fun trucks!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks Dana! Qualifying today! No spoilers!
@ludicrousspeed82
@ludicrousspeed82 5 жыл бұрын
I really like the Comanche. I've been wanting to try those 4.19 MTR's on my F100 Ascender for a while now. Glad to see you like them. Using the actual factory paint is a fun idea.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
It’s a great tire. I’m really happy with it’s looks, and it’s performance!
@RCPropaganda
@RCPropaganda 5 жыл бұрын
Nice trucks. Makes me want to start something new.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Right on! That's the goal!
@jaybenson2247
@jaybenson2247 5 жыл бұрын
Love that engine by Mr. Comad, it’s beautiful!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
It definitely is!
@Blitz0065
@Blitz0065 5 жыл бұрын
You don't know how much I want a high detailed 1/10 version of the Toyota Pickup body you have on the SCX-24. Crossing my fingers
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
It'd be nice to see a new hard body!
@samuelpillow4903
@samuelpillow4903 5 жыл бұрын
im curious how this would fit.. www.hobbyeasy.com/en/data/gl3pke3pcfmdx80ejmif.html
@Blitz0065
@Blitz0065 5 жыл бұрын
@@scalebuildersguild Yesssss!
@calcagno4545
@calcagno4545 5 жыл бұрын
Do you have a video on brazing?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I don’t. Not really anyway. It was featured somewhere, but I can’t remember where. I may do a stand-alone one soon.
@JK-qv8sv
@JK-qv8sv 5 жыл бұрын
Nice work on all your rigs sir! I did an Isuzu mü last winter, fun build. Don't forget to install a Yeah Racing steering rack, junfac skid plate, and some custom rear links 😁
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Already got the steering rack!
@nwhuckin7761
@nwhuckin7761 5 жыл бұрын
not to nit pik but the front driveline output on the trecker should come out the other side. like the idea of a trekker. There is a full size restore in yellow that i see come up for sale every once in a while... scale would save a lot of $$$
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Yes, and if I could have that option, I would!
@samuelpillow4903
@samuelpillow4903 5 жыл бұрын
that SCX24 looks the goods. now i see a unimog behind you.....
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I’ll get to that!
@ChrisKnowlesTube
@ChrisKnowlesTube 5 жыл бұрын
Awesome video as always. What scale is the Toyota body for the SCX24? I have a 1/24 scale Hobby Plus truck and finding 1/24 scale model kits wheel bases are a short by 1/4-1/2 inch.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks! AMT label this one as 20th scale.
@ChrisKnowlesTube
@ChrisKnowlesTube 5 жыл бұрын
Scale Builder's Guild thanks, That makes sense. Keep up the great work.
@Spoo76
@Spoo76 5 жыл бұрын
1/20 is the best size for most 1/24 trucks if you consider the HobbyPlus to be short wheelbase and the scx24 medium wheelbase. The road rippers JK fits the HobbyPlus perfectly, but there's a lot more options once you start adjusting your wheel base
@ChrisKnowlesTube
@ChrisKnowlesTube 5 жыл бұрын
Spoo76 how did you adjust your wheelbase on the Hobby Plus, did you make new rods?
@Spoo76
@Spoo76 5 жыл бұрын
@@ChrisKnowlesTube you could technically cut and sleeve the stock rods and drive shafts, but it looks much nicer making custom links. I forget what size as I've had them laying around, but 1/24 Redcat Sumo/HBX Devastator or slightly smaller would work. Check out the Micro area on RCcrawler or the Micro Rock crawler group on FB
@nemocheerio
@nemocheerio 5 жыл бұрын
I love these videos. Motivates me to clean up my workbench (I mean kitchen counter). Whats up with the Trailwalker and Humvee?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Things are happening, but those two get their own, separate videos.
@DADRacingYT
@DADRacingYT 5 жыл бұрын
Love those trucks man. Nice job on the builds. I’m just sitting here dreaming haha
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
All it takes is time, practice and patience!
@DADRacingYT
@DADRacingYT 5 жыл бұрын
Scale Builder's Guild have you ever tried the rc4wd 2001 Tacoma on the trx4 sport chassis? I’m considering it but it’s pretty narrow. Wonder how much I’d have to customize the trx4 to make it fit.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
@@DADRacingYT WAY TOO NARROW! Unless you're cool with that look.
@DADRacingYT
@DADRacingYT 5 жыл бұрын
@@scalebuildersguild yeah that is what im worried about. seen those online and looked fine but in person is a whole new thing
@rc-ingaroundamerica8792
@rc-ingaroundamerica8792 5 жыл бұрын
Awesome jeep, cant wait till I get the money for one of those vs410 kits
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Buy the chassis kit and add your own bits!
@rc-ingaroundamerica8792
@rc-ingaroundamerica8792 5 жыл бұрын
@@scalebuildersguild main reason is I also wanted those scale axles, that's why I'm was looking at the whole kit but like you said buy it as I go would be easier, lol
@stevenbyrd71
@stevenbyrd71 3 жыл бұрын
Love that Scx24 build.
@jamesn.449
@jamesn.449 5 жыл бұрын
Loving the MJ. The grill is 97-01 style. 84-96 were the older style.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I was close!
@jamesn.449
@jamesn.449 5 жыл бұрын
@@scalebuildersguild You were. Really like this series hope to see more.
@michaelhoyle2665
@michaelhoyle2665 5 жыл бұрын
So many cool projects. Any update on the new Enduro Trailwalker?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Not done yet. When it is, I’ll post a new video go over all the changes and announce the winner.
@vlozity
@vlozity 5 жыл бұрын
what foams do you use on the Rock Beast 4.45 tires?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Not sure, probably stock Pit Bull foams. It's not a comp truck.
@vlozity
@vlozity 5 жыл бұрын
@@scalebuildersguildthanks
@mikes062
@mikes062 5 жыл бұрын
You and your yota’s...lol scx24 looks cool! I want to get one at some point
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
They’re a lot of fun!
@chadroeder2586
@chadroeder2586 5 жыл бұрын
i feel they are on perpetual back order. I have my order in but am still waiting.
@CORINKERSTEN
@CORINKERSTEN 5 жыл бұрын
Yeah this is awesome, But do you have the carpa yet?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Hahahaha on its way!
@rcr0ck
@rcr0ck 5 жыл бұрын
Yes you're doing a CC01, is your Harley designs mate getting on board?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Probably not!
@davidbanaszak562
@davidbanaszak562 5 жыл бұрын
The scx24, yes it looks Hawaiian, having lived there for 3.5 years I can say you have it quite accurate. Just need a surfboard pad
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Mahalo!
@ludicrousspeed82
@ludicrousspeed82 5 жыл бұрын
When I was in Hawaii I saw a lot of trucks that were lifted to the moon with almost stock sized tires. I was a very odd look and there were so many of them.
@davidbanaszak562
@davidbanaszak562 5 жыл бұрын
@@ludicrousspeed82 yes I agree.. and for some reason they were mostly toyotas and all painted dark grey..
@ludicrousspeed82
@ludicrousspeed82 5 жыл бұрын
@@davidbanaszak562 Haha yes they were!
@davidbanaszak562
@davidbanaszak562 5 жыл бұрын
@@ludicrousspeed82 they had stock tires for the motor vehicle inspections and probably because they could not afford the proper ones.
@ickypowwow6635
@ickypowwow6635 4 жыл бұрын
did you have to do anything to line up the wheels with the wheel wells or did it just happen to fit that perfect?
@scalebuildersguild
@scalebuildersguild 4 жыл бұрын
I measured before I bought the new body.
@jonmandelbaum5395
@jonmandelbaum5395 4 жыл бұрын
I’d be interested to see what you’d do with a hobby plus CR18 now that they updated the front linkage.
@datsun4x
@datsun4x 5 жыл бұрын
Lovin' the trekker! Have you thought about some 18650 cells so you can hide them in different areas of the chassis?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I hadn’t! Interesting idea!
@RandomStuffGarage619
@RandomStuffGarage619 5 жыл бұрын
Oy Matt, shinchu from the forums here. I used that testors rattle can for my 79 ford tribute build. I sprayed the root beer pretty liberally (says one coat formula iirc) and it layed down pretty nice. BE CAREFUL with clear coat though. Mine got a little cloudy in some spots. Just go light from far away and should be okay. Maybe some testing on primered styrene to see what it does. Builds are looking great as usual sir! Need updates on that taco truck though! ;) thought I wouldnt say "tacos" this post, didnt you??!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks for the tips my friend!
@johngrant1337
@johngrant1337 5 жыл бұрын
I think you are missing the rust on the wheel wells. How is the element that you are working doing ? Like we say in florida don't eat the yellow snow ( how I need somebody to tell me what yellow snow is ?)(hahaha)
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha! I’ll do my best to avoid it!
@DeadnCold
@DeadnCold 5 жыл бұрын
The CC-01 was first released in 93 iirc. So it's getting closer to 30 years. You should have waited a bit for the new CC-02 to come out.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
And what makes you think that that’s not already on the way? 😉
@Biowolf626
@Biowolf626 4 жыл бұрын
One thing I like about my Isuzu cco1 is it’s ifs like the 1.1. Adds to the realism of the body
@michaellenheiser3157
@michaellenheiser3157 5 жыл бұрын
Love the Comanche and the bench update! I'm working on a Proline Comanche body as we speak. Can you provide a link to the Comanche side stripe decals if you had them done. Kind regards
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
JS Scale made the stripes for me.
@smokeyrc9070
@smokeyrc9070 5 жыл бұрын
What would i need to buy to start brazing I've never done it and would like to try. The cheapest option would be great. I'm also Canadian so anywhere in Canada to buy the stuff would be great like princess auto.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
MAPP gas torch, 45 bearing silver solder, flux, safety gear, a few clamps, etc. Silver solder is hard to find. Good luck!
@ssamssamssamsson
@ssamssamssamsson 5 жыл бұрын
Excellent video! Very tastefully built trucks, especially the Toyota Trekker, hope to see more on that build in the future. Thanks for the updates always very inspiring. How’s that SCX24 perform? Any mechanical upgrades planned for it?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I've got a lot of upgrades planned to make the SCX24 even better than it already is. Just wait!
@rzenj2208
@rzenj2208 5 жыл бұрын
Good day sir what 1/24killer body is that?
@mikej8832
@mikej8832 5 жыл бұрын
Has anyone tried using magnets to washers versus using magnets to magnets? Seems more forgiving polarity wise
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Oh totally.
@michiganman9048
@michiganman9048 5 жыл бұрын
Fantastic builds. I am really looking forward to the Trekker completion. You mentioned a source for original paints, do you have a link?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
www.robertspaintcare.com/
@lesterdunfordjr8267
@lesterdunfordjr8267 5 жыл бұрын
I don’t the same build months ago I got to put the full motor and trans in it and full interior. I wish I could post a pic
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
You could on our forum!
@01KnightRiderGT
@01KnightRiderGT 5 жыл бұрын
Hey, when's the running video of the scx24 coming out? Would love to see it on a 1/10 scale trail. Please please please make that vid :)
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
As soon as I get the next round of changes done, I will!
@BSalc
@BSalc 5 жыл бұрын
Nice trucks! 🤓... I’m really diggin’ the Comanche body but I cant find it anywhere.. No, I don’t like the chopped off cherokee body that can be found basically everywhere (even at walmart). They look dumb (specially the truckbed). JsScale dont show it on their website... any recommendation where to get it would be great! Thanks!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Hmm weird, perhaps Manitou only offers it now? Check mfab studio on Facebook.
@BSalc
@BSalc 5 жыл бұрын
Cheese & Rice! Manitou got tons of ridiculously cool stuff! Thanks a bunch “Nice Guy” Matt! 👍🏽
@thedumpydustman6088
@thedumpydustman6088 5 жыл бұрын
Some very cool builds there buddy. I extended my CC01 slightly and fitted a Fall Guy themed Clodbuster shell on looked the absolute bomb but drives like crap though 🤣🤣🤣
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha! Sounds awesome!
@billeyblackwell-kerslake603
@billeyblackwell-kerslake603 4 жыл бұрын
Where did you say you got the Toyota body for the scx24 from. By the way really like you videos cheers
@scalebuildersguild
@scalebuildersguild 4 жыл бұрын
It’s a 24th scale static model kit. eBay!
@billeyblackwell-kerslake603
@billeyblackwell-kerslake603 4 жыл бұрын
@@scalebuildersguild OK thank you
@kylemikel6395
@kylemikel6395 4 жыл бұрын
What 3D printer do you use? Also, would you look at a different printer if you had a choice to get another?
@scalebuildersguild
@scalebuildersguild 4 жыл бұрын
Tevo Tornado. I’d also look at the Prusa i3
@kylemikel6395
@kylemikel6395 4 жыл бұрын
Awesome! Thank you good sir ;)
@wonspec
@wonspec 5 жыл бұрын
oh, cool a cc-01 build. please get a cc-02 when it's released (hopefully soon) and maybe build them in a side by side comparison.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
On it’s way!
@LockRockRCs
@LockRockRCs 4 жыл бұрын
I'm from central Pa. When and where is event if you're coming back.
@scalebuildersguild
@scalebuildersguild 4 жыл бұрын
I presume you're talking about ECSC? You can find all the details on Facebook. It's held in New Castle.
@LockRockRCs
@LockRockRCs 4 жыл бұрын
@@scalebuildersguild That's cool. I definitely drive there. About an hr or 2. I'm rt in the middle of the state. Thank you.
@ferp420
@ferp420 5 жыл бұрын
please do a video and or a build thread on the cc01 i keep telling myself thats my next rc but it never ends up that way
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I’ll wait until the Cc02!
@zakyvids6566
@zakyvids6566 5 жыл бұрын
I m looking for either a 1/16 or 1/18 chassis and don’t know where to look for one
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Not sure where you’d look, sorry!
@Spoo76
@Spoo76 5 жыл бұрын
Depending on your wheel base a HobbyPlus CR-18 is a great start. The axles are widened CR-24 axles, the chassis is similar but obviously longer with a few other improvements over the CR-24. Compared to a RC4WD 1/18 it's half the price with a more useable wheelbase for 1/18 bodies. If you're using a short WB or medium WB an SCX24 works well
@robmorrissy1566
@robmorrissy1566 5 жыл бұрын
What magnets do you use I'm building a truck for my father I want it scale and simple as he has never had an RC before
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Rare earth magnets!
@robmorrissy1566
@robmorrissy1566 5 жыл бұрын
@@scalebuildersguild thank you very much It's hopefully going to be a scale replica of his 79 bronco Even trying to mesh some gcm coil buckets into it Keep up the killer work
@00godlovesus
@00godlovesus 5 жыл бұрын
Nice work:)
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks Marc!
@johnkealohafero8900
@johnkealohafero8900 4 жыл бұрын
hahaha a hawaiian truck 👊🏾👊🏾🤙🏾🤙🏾
@matk4731
@matk4731 5 жыл бұрын
A MU cool AKA Mooo. A mate of mine has a full size one as his daily driver 👍🏻👍🏻🙃🙃
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Nice!
@dustinrenner7553
@dustinrenner7553 5 жыл бұрын
I wanna see more on the no prep car!
@P_Hamtramck
@P_Hamtramck 2 жыл бұрын
Late to the game on this update but so many fun projects. So is the Mu in the queue?
@scalebuildersguild
@scalebuildersguild 2 жыл бұрын
The CC01?
@P_Hamtramck
@P_Hamtramck 2 жыл бұрын
Yup, did I miss it?
@christopherlastname7638
@christopherlastname7638 5 жыл бұрын
The cc-01 was a fun kit to put together like you said it's not accurate or scail but fun kit to build!
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I love me some Tamiya!
@rcr0ck
@rcr0ck 5 жыл бұрын
My profile picture is a Losi micro crawler with a 1/24 static model of a 1/1 Pathfinder I used to own.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Nice!
@seanhanley947
@seanhanley947 5 жыл бұрын
Hey you got a canoe! Where's your paddles?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
They’re around this mess somewhere!
@datsun4x
@datsun4x 5 жыл бұрын
Its downstream. Now he's up the creek without a paddle.
@jaymartin5434
@jaymartin5434 4 жыл бұрын
I love it and want it
@cannasgarden2481
@cannasgarden2481 5 жыл бұрын
I just started making RC videos , your content is great! Do you have any tips? Thanks in advance
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Could you be more specific? I have a video where I detail the equipment that I use if that helps.
@blainezaskowski1528
@blainezaskowski1528 2 жыл бұрын
Which scx24 length is the body on and what model kit is it?
@scalebuildersguild
@scalebuildersguild 2 жыл бұрын
AMT makes the kit.
@JtAnthonys
@JtAnthonys 2 жыл бұрын
Is the scx24 body a a 1/25 or the 1/20 body i have bin looking for it. But 2 diferent one come up
@scalebuildersguild
@scalebuildersguild 2 жыл бұрын
1/20th
@JtAnthonys
@JtAnthonys 2 жыл бұрын
Thanx so much. Love your video 🙏🏼
@mikes062
@mikes062 5 жыл бұрын
The cc01 came out in 1993 actually! It was a YJ
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I was way off!
@josbarhorst
@josbarhorst 5 жыл бұрын
Almost... YJ was 1994. First CC01 was the Pajero. Looking at my YJ now... ready for a chassis upgrade.
@ace73pq
@ace73pq 5 жыл бұрын
Yep, December 16th 1993, but it was the Mitsubishi Pajero 58132... The Wrangler 58141 was released on September 6th 1994...
@mikes062
@mikes062 5 жыл бұрын
Yup that’s right, the YJ is the one I really want but they got expensive last I checked if you could find one
@hrod84
@hrod84 5 жыл бұрын
Aww i was hoping to hear about the progress on that big hardbody Unimog behind you. 😢
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I'll get to it, eventually!
@stevelangley246
@stevelangley246 5 жыл бұрын
Just add a third magnet front and rear to the Comanche.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Good idea!
@sethtrends1655
@sethtrends1655 5 жыл бұрын
In Hawaii old trucks like that usually have small rims
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha, cool!
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 5 жыл бұрын
I know it's not AS accurate as a Custom Body 3D Printed from Unobtainium... But what do you think of the Team Raffee Comanche Body? Excited to see even more from the Trekker build!! 👍👍 Carmine ✈🚂🚙
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
It’s not a Comanche sadly. Needs the extra bit of cab behind the rear of the door, and doesn’t have it.
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 5 жыл бұрын
That's a shame... I'm hoping for a Hardbody NOT very expensive, to replace the ProLine Lexan Comanche Body on mine... I checked out the links you left... Comma D?? Has several Engine options! He's got a 345 International Engine - perfect for a Scout II... But with just a little massaging, could make an acceptable 360 AMC Engine for the Comanche/Cherokee. At least up to 1984... 😉 ON my Wish list for sure!
@MrMackcriville
@MrMackcriville 4 жыл бұрын
Where can i get the toyota for my scx24? Thank you
@scalebuildersguild
@scalebuildersguild 4 жыл бұрын
I got mine on eBay.
@anyday2135
@anyday2135 5 жыл бұрын
Put the battery on the back of the sliders
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Yep, likely be where it'll go!
@TheDeLeonGarageCollection
@TheDeLeonGarageCollection 5 жыл бұрын
I bought that Toyota kit to build as a static model, but I never thought about building it as a crawler...hmm. Thats really cool. btw, did you lengthen the bed or is that how it looks?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I actually Bobbed it!
@followtheflow9408
@followtheflow9408 2 жыл бұрын
What model kit was used for this? Amt?? Tamiya??
@MatthewJorgensen1968
@MatthewJorgensen1968 5 жыл бұрын
Well, if you want a Tamiya kit, get the CC-02 when it comes out...
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Way ahead of you sir...
@kaimartinson9414
@kaimartinson9414 5 жыл бұрын
heyo what camera do you use?
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Sony a6500
@darrenkarge7372
@darrenkarge7372 5 жыл бұрын
Is there a place to get the files to print one at home
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Nope!
@quintonwilliams4730
@quintonwilliams4730 Жыл бұрын
New to the channel in the hobby what is a dig unit
@scalebuildersguild
@scalebuildersguild Жыл бұрын
Dig is a lockout for the rear axle. When engaged, the rear axle doesn’t spin. Allowing you to pivot the truck around in very tight radius. Helpful in comps and technical rock crawling.
@quintonwilliams4730
@quintonwilliams4730 Жыл бұрын
Awesome I might have to add that to mine I'm building a Traxxas 2021 bronco lifted bigger tires and I'm on my way to Lowe's now to finish my backyard crawling course
@michaeldeering798
@michaeldeering798 5 жыл бұрын
Great update! Now what about the overland Unimog, Trailwalker, C2X,....;)
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Ha! All in time!
@gwpattrick
@gwpattrick 5 жыл бұрын
Didn't the comanche have 8 slots in the grill. The only time they did that.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Not that I’ve ever seen. ZJ’s has eight.
@gwpattrick
@gwpattrick 5 жыл бұрын
@@scalebuildersguild ah i saw that one KZbin video. Forgot the name, they were trail crawling with it against a jeep. No matter thanks and bye
@biancagarcia5982
@biancagarcia5982 4 жыл бұрын
do you ever sell any projects
@scalebuildersguild
@scalebuildersguild 4 жыл бұрын
Yep! I regularly post them for sale on the forum.
@camyota
@camyota 5 жыл бұрын
Don't know if you'll be running 2 or 3s in the trekker build but I run 2 1800mah 2s packs and they sit under the cab on top of "sliders" I built. Check out the "JK build breakdown" video on my channel and you'll see what I mean.
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
I generally run 3S on everything these days. I'll check it out, thanks!
@camyota
@camyota 5 жыл бұрын
Figured that. I believe turnigy has 3s packs that aren't much thicker than these. And you're welcome.
@jamesjohnson3650
@jamesjohnson3650 5 жыл бұрын
😍
@scalebuildersguild
@scalebuildersguild 5 жыл бұрын
Thanks!
@CharlieFultonSC
@CharlieFultonSC 3 жыл бұрын
Can you make a video helping us explain to the wife why we need “another” rig.
@scalebuildersguild
@scalebuildersguild 3 жыл бұрын
The secret is, "I bought this ages ago and when I did, it was on sale!"
What's on the Bench! Ep6
13:46
Scale Builder's Guild
Рет қаралды 15 М.
What's On the Bench! Ep10
21:14
Scale Builder's Guild
Рет қаралды 14 М.
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
What's On the Bench! Ep8
15:05
Scale Builder's Guild
Рет қаралды 12 М.
What's on the Bench Weekly Ep5
14:52
Scale Builder's Guild
Рет қаралды 11 М.
What's On the Bench - Ep11
21:06
Scale Builder's Guild
Рет қаралды 16 М.
What's on the Bench Weekly! - Ep.1
12:42
Scale Builder's Guild
Рет қаралды 13 М.
Custom SCX24 in 4 days? Was it all just a waste?
28:02
Harley Designs
Рет қаралды 30 М.
Scx24 Build Breakdown! Pinched Toyota edition
12:19
Moneypit__RC
Рет қаралды 918
Axial SCX24 Budget Build Off Ep5
15:47
Scale Builder's Guild
Рет қаралды 31 М.
EASIEST patina paint method
6:58
24Yep
Рет қаралды 6 М.
What's On the Bench! Ep9
22:58
Scale Builder's Guild
Рет қаралды 12 М.
What's on the Bench! Ep7
15:54
Scale Builder's Guild
Рет қаралды 8 М.
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН