The RC4WD C2X is Ready for Competition!

[@turksandjerps]

That’s not even a real truck

[@scalebuildersguild]

UM HOW WOULD YOU KNOW? MY STEPDAD GARY BUILDED THIS

[@JamminJim42]

@@scalebuildersguild Bwahaaaaaaaa........NICE one Matt !!! Garyz got skillz.

[@brianginn6354]

I just want to know where the box is? Too many videos about little trucks, not enough about boxes.

[@FreedomYak]

Scale Builder's Guild This... this cracks me up🤣

[@SwampersRC]

HAHAHAHAHAAAAA!

[@jayt702LV]

I have one and your videos have helped me along this journey. It performs really well and it’s my favorite truck of the 3 I own.

[@RCKnockout]

RC4WD has some of the most detailed and scale looking trucks. Almost look like real ones!!

[@agoodballet]

What a great lookin truck. Sometimes I wish I could have ‘em all. Then I remember I have like 10 trucks that need finished. It seems as if this hobby is more building than it is crawling for me, every time I finish a truck I end up changing my mind and tearing it apart to start over. Maybe I should start selling them and starting over fresh.

[@bigdawgsrcpitstop]

Love the driveshaft hanging at the end

[@FreedomYak]

The build turned out amazing and it seems very capable. Doesn’t hurt to have an experienced driver at the stick either. Couldn’t tell if that was your head on the driver🤣. Nice one👍🏻

[@NikkiNexo777]

Cool video! This truck looks pretty damn capable, just as much as any other truck.

[@1111-t5n]

Imagination ingenuity and human engineering brings out the abilities of the builder and brings us what rc4wd should have built. Rad rip through the rocks

[@stratobungle]

Awesome vid, Matt! Your C2X is looking and performing great - very nice to see that the Micro X and HH Stubby are working out, as I have those ready to be installed in mine - strangely enough, I also have the Vanquish plastic bumper up front, the ARB add-on lights, and the C2X basic lighting kit... I only wish my living situation would allow me to learn how to weld/braze, because I am sorta stuck with that utility bed. I'll try to come up with something different to do back there! I am very happy they sent the aluminum replacement Panhard out to owners free of charge, though I didn't get anything extra...and I also picked up some replacement steel driveshafts from Jun-Fac to try out. Oh - and my Ascender K10 has X's for eyes!

[@MrSneakyGunz]

Beautiful camera work as always! 👍

[@slowburn_1725]

At a glance head on it could pass for an 80's VW rabbit truck, nice rig though I can dig it

[@ridef1rst]

The tape on the headlights ...

[@mikej8832]

Its to help you with your aiming X marks the spot 😁

[@rickstephens4490]

Nice build, great video. I chuckled at the slow motion 'ass-over-applecart' maneuver at 2.13--looked a lot like my last outting with newest build. Keep up the good work, love the truck.

[@fishrowe420]

We have a trail called LITTLE GNARLY that looks just like that last rooty section. Big gnarly roots EVERYWHERE.... Good times.

[@DanielStinebaugh]

Amazing Build as always! At about 3:30 is pretty much every run I've ever done. Tackle the climb you didn't think you could do, get hung up on a simple root you figured wouldn't even be an issue :D

[@Rcworldshop]

I think its deff not one of your favo trucks but you made it cool. I just did the IERC shock mounts and im not sure if it makes the truck better. CG maybe lower but the belly hits more also...so you need more wheelspin actions. I must say I like mine..tho.

[@wackyrc1394]

Shakedown completed, comp's agogo 👍

[@gerritkolijn3734]

What a beast Matt! The parts for my Enduro build can't get here fast enough...

[@douglasparnell3224]

Looks like you broke a drive shaft at the end. Great video 👍👍

[@mojaverc1585]

Wow that looks so great

[@kinslersrccustoms6945]

Looks really great and so much better movement over the rocks than right out of the box. Nicely done. What are your thoughts about it now?

[@scalebuildersguild]

Much better!

[@kinslersrccustoms6945]

@@scalebuildersguild Thanks for sharing and getting back to me so fast.

[@savagelife977]

Looks like a fun truck

[@danielkonrad1444]

That's a beauty. Awesome.

[@shadowsystemsrc9389]

Good times! The live stream with GCM was great! Thanks for all the content!

[@scalebuildersguild]

Glad you enjoyed it!

[@Chris_Bumpus]

Turned out great matt!

[@BinghiT33]

Very cool. Lol I was wondering where was your driver. It wasn't until half way into the video that I thought to look to the opposite side. Very cool🤙🏼🤙🏼

[@ReadySetRC]

Great run👍👍

[@mrbrightsidewill5213]

Hi can i ask what links are you using for the c2x and rhe cage? Its a beauty!

[@scalebuildersguild]

Links are stock, cage is custom brazed by me!

[@mrbrightsidewill5213]

Scale Builder's Guild awesome cage manzzzz!! Keep up the good work on ur vids and builds yaaa. And keep up the dark humour hahha. Lots of love from singapore!!!

[@osakama6641]

Hello there, great build 👍👍👍 What's the brand name of the rear cage? Looks so cool...

[@scalebuildersguild]

I made the rear cage by brazing tube together. Thanks for watching!

[@thebarnyard5633]

Great build but damn son the videography on top is amazing!

[@backwoodcrawling8622]

Love the builds and how did you paint yours

[@mtgoat4434]

Very nice truck! What did you do to lower that Rc4wd truck?

[@scalebuildersguild]

Many, many things. Worth going through the rest of the content I've done on it so you can see!

[@thejason51873]

Quick question for you, will this thing stock fit a 550 motor?

[@DOFIXERR]

definitely dig the paint job. what color blue is that?

[@scalebuildersguild]

Thank you! It's Tamiya AS-19.

[@milothetinker]

I see a few splashes of Joshy bits. Nice rig

[@BlindGuyRc]

This is a great looking truck. Awesome video. As always hahaha. 👍👍😁

[@Rcworldshop]

I love mine.. do you think the wider wheelbase you have have also positively effects the overall crawling?? Or just the roll overs?

[@scalebuildersguild]

Definitely helps!

[@1972bmac]

Hello from santa barbara, did you ever find a spot for a servo winch? thanks for all your awesome vids buddy..

[@scalebuildersguild]

I believe I mounted one before I sold it with a couple of additional servo mounts on the rail.

[@joss67uk]

Its a clean looking truck, I love it.

[@ozboy8144]

Nice run rig looks sweet👍

[@RichB07]

Nice truck . I want to build a custom crawler . I've done a few but never went with hardbody lcg .

[@judoki999]

Great Vid!

[@jamesrierson4240]

Where did you get the gage for the rear? Or is it custom??

[@scalebuildersguild]

The cage is custom.

[@slzbuildz]

Always love your running videos.

[@johnsdad092009]

Epic video Matt

[@RcNickster709]

Fantastic video bud. Great looking truck . Looks absolutely unstoppable out there. Thumbs up and Yup definitely Comp Ready.. :) as soon as you fix that axle... 😉

[@jdsrcs8061]

Dang!!!I This is is your best vid hands down!!! Good job, maybe that other dude will make a cool vid some day if he can!!!🤣🤣🤣 I had that same breakage a few years back on the rear yoke of my jeep.

[@scrc1]

Keeping it real with that driveshaft flopping around at the end 👏🏻👏🏻

[@scalebuildersguild]

You can probably guess what my next upgrade is. ;)

[@stratobungle]

@@scalebuildersguild I picked up a set of Jun-Fac shafts that I hope will fit.

[@CarminesRCTipsandTricks]

NOW it's a Class 2 ready Rig!! Looks great Matt. Performs well.... And your Videography right on point as always!! Did you get through that spot at the end? Please stay SAFE! 😷 Carmine ✈🚂🚙

[@marklettington9801]

Love it I wanted one but now I will need one🤯

[@Cursed_jimny_4x4uk]

What paint number you used on this? Dig the dull blue/grey colour

[@scalebuildersguild]

This is Tamiya AS-19

[@Cursed_jimny_4x4uk]

@@scalebuildersguild very nice colour indeed

[@braddahdussifyoumuss596]

Beautiful truck my dude and the video was super good! Is this shot on your iPhone?

[@scalebuildersguild]

Thanks, no. I shoot all my videos with the Sony a6500.

[@operation11charlieinc]

Awesome job brother, love the C2X stay safe brother

[@scalebuildersguild]

Thanks! Will do!

[@operation11charlieinc]

@@scalebuildersguild 🙏🤙✌🙏

[@e3s-rc]

Great video and run! 👍🏼👍🏼👍🏼😍

[@scalebuildersguild]

Thank you so much 😀

[@gabrielsandoval3136]

Where did you get those lights that are on the bumper?

[@scalebuildersguild]

bit.ly/2UXulT5

[@mikej8832]

Add those to my ever growing want list

[@marcusmanley2986]

What is the length of those shocks? Looks good sitting lower.

[@scalebuildersguild]

Stock, so I think 90mm.

[@80texansfan]

Where did you get that winch???

[@scalebuildersguild]

Rc4wd

[@chuckgrc3011]

Came out beautiful. Perfect edit as always 🤛

[@kylethatcher5828]

great video! that thing looks awesome. i would really like to see a similar video and overview of the vs4-10 pro class 2 afterseeing your IG post where you said it's the best performing vehicle you've ever made.

[@scalebuildersguild]

Coming soon!

[@axialline4319]

I like a lot your edits

[@comeandtakeit5709]

Did something break in the front end at the very end of the video. ?

[@scalebuildersguild]

Yep! Driveshaft exploded!

[@comeandtakeit5709]

@@scalebuildersguild well at least you know you’re doing it right.

[@CarDreamsinStyrene]

Great run.... love that video

[@scalebuildersguild]

Glad you enjoyed it!

[@matthewrustia4874]

Now for the all important question. What’s better? •Yota jellybean LC80 Or •The C2X Hilux

[@scalebuildersguild]

No question. Jellybean. By miles. Running video is in the edit suite.

[@kellykuretich6366]

I like it! 👍👍👍

[@matthewfodor9305]

Bought one the first run a pin came out of front end put it back in only ran for 10 minutes. Front end on the side that pin came out had so much slop in it It looked like tire was going to fall off Second run set screw came out of drive shafts I’ve had a lot of rc s this one is worst out of box

[@scalebuildersguild]

Interesting perspective. I've had the experience that with most RTR's, it's a good idea to give them a solid once-over before taking them out. Loctite is your friend!

[@CoachD386]

The videography in this one 💯! Good stuff Matt 💪🏾🚀🔥 #rcfam4life™️

[@scalebuildersguild]

Glad you liked it!! Thanks for watching man!

[@nukedathlonman]

Nice, graceful. Oh *SNAP*... Uh oh....

[@scalebuildersguild]

I know, right?

[@tectonicboson]

What color is the truck

[@scalebuildersguild]

Tamiya AS-19

[@matthewchin6454]

awsum!

[@TheWright1]

Yep just like a real Toyota always breaking on the trail. Haha 😆

[@scalebuildersguild]

You got that right!

[@leslieperkins8891]

It looked like you broke a front drive shaft ant the very end of the video

[@scalebuildersguild]

Correct. Can you guess what my next upgrade will be?

[@mikep.9338]

💯👍🏽👍🏽👍🏽

[@israelcardona5170]

Sir I don't believe you driveshaft is supposed to go a limp like that.

[@scalebuildersguild]

Guess what my next upgrade is?

[@israelcardona5170]

@@scalebuildersguild selling it and getting something better? 😂 JK probably not limp driveshafts

[@kdoeone]

Isn't that truck. A comp ready truck?

[@scalebuildersguild]

Not in stock form, unless you like to flip over a lot. ;)

[@kdoeone]

@@scalebuildersguild gotcha. My d110 needed a bit if help too. Still top heavy but it gets down. Enjoying the channel.

[@beazkneez]

BEEFY!

[@proraptor4146]

Meh

[@scalebuildersguild]

Can’t win ‘Em all!

[@phillprice5225]

You've been spending too much time with Hardley Designs. This truck just isn't you at all.

[@scalebuildersguild]

Curious as to why you’d think that. This truck from the beginning was destined to be a complete truck. There’s a ton of custom work, and refining to make this a decent platform, plus, it’s got a driver! 😉

[@phillprice5225]

Don't get me wrong, it's a lovely truck, but it's not as realistic as the trucks you usually create. Perhaps a bit too extreme. Thanks for all the great videos by the way. I also wanted to write 'Hardley Designs'. I thought you'd like that name.

[@00godlovesus]

Next time more of your pretty face:)

[@scalebuildersguild]

LOLOLOLOL