I really enjoy watching your testing you're an amazing pilot And very skilled at making your own parts 😊
@tomling93103 жыл бұрын
Good videos mate. I enjoy your testing in them. Good job. 👍
@pedrofdmp3 жыл бұрын
Sounds amazing
@raffaelerossi51832 жыл бұрын
Hi. Very interesting. I subscribed to your channel. Sorry for the question i just start to explore edf model. I know lipo battery never heard about lion battery. Is it better than lipo? Many thanks.
@afterburnerrc63333 жыл бұрын
Hey Wojtek, great video. How are you configuring 8S? Did You make custom 4S battery packs and run them in series? What MAH are you running?
@needmoreboost63699 ай бұрын
I’d love an edf unit like that! The sound is excellent! Also Very impressive looking carbon/nylon blades! Did you have to smooth or sand them at all? the billet aluminium is nice looking too! Much nicer than my cheap e flite and similar ones!
@dougrichardson92562 жыл бұрын
Wojtek, Di I see it right…. 6s packs of Samsung t40 , it is 2 cell series x 6 groups parallel = 12 cells total? Add nickel and wiring , and covering to get to 945 g then parallel 2 of these for the HET- 700-68 -2100kv motor?
@williiamtorreselera966711 ай бұрын
Velocidad máxima de vuelo
@G.SpotFPV3 жыл бұрын
very very very nice! what is the KV of the odissey 40mm motor you will use with 12S please? Also the jp hobby rotor is gorgeous in your 3d printed edf, and what do you think about an edf design with a fixed spinner like the original jp are, dont you think it could be way more effective without a rotative spinner? thx
@EDFjetRC3 жыл бұрын
The motor is 1100kv, 550g. Yes you are right, I am 3d printing now the fixed spinner version of the 120 edf.
@G.SpotFPV3 жыл бұрын
@@EDFjetRC excellent, congrats keep up the good work that is realy great content
@lextek5953 жыл бұрын
What size 6S were you using? Sorry if I missed it. Great video.
@adamtrzaskowski39012 жыл бұрын
"8s 208 Amps 5,5 kW." There is no way that Samsung 40T in 3P configuration delivered 200+ Amps. Physically impossible, this must be a measurement error. I am building the same setup right now (Avanti with HET 1400 and 8S3P Molicel P42 :)
@sendit_rc Жыл бұрын
Could I run 8s graphene on a het 700-68-2100kv with a castle creations 160 hv esc?
@pavelkopenec27662 жыл бұрын
Hi, I also run Frsky Horus 10 Expres, also with EDF Midifan Evo Unit. I would like to ask how do you display the maximum telemetry values on the transmitter?
@carlosesilviamoreira59692 жыл бұрын
Good morning EDF jet RC. I have a HET 700-68-2250kv motor, and I want to install this motor on the WeMoTec Midi Evo 90mm with 11 or 12 blades. Now I ask you. What is the store and code where I can buy this WeMoTec Midi Evo 90mm just like yours? I want my sebart mini jet to have a real jet sound. Thank you waiting for a reply.
@TheVincVega3 жыл бұрын
Hello, I love your work, I wanted to ask you something, I am waiting for a mini avanti s to arrive and I have some emax es09md servos, do you think they are enough for him? Thank you so much.
@EDFjetRC3 жыл бұрын
for sure enough :)
@TheVincVega3 жыл бұрын
@@EDFjetRC thanks
@philipmarwood10602 жыл бұрын
Hi, with regards to the wemotec for the avanti a 80mm, what voltage setting on the ubec 6v, 7.4 or 8.4v, 8s set up using 6s 5600 and 2s 5000mah, thank you and happy dlying
@raulherrera62442 жыл бұрын
Hola amigo donde conseguir uno de esos
@sundayfloater29263 жыл бұрын
Excellent! But as far as I have understood it you draw 54 Amps at 2x 6S and 69,3 Amp at 3x 8S from the batteries ?! How long can a T40 resist this stress? I own a Sebart Avanti Mini with a DS-51-AXI HDS / HET-700-68-2100kV. Do you think it would give enough thrust and power with 2x 6 S T40-packs? www.schuebeler-jets.de/pdf/Messungen/DS-51-AXI_HDS_HET-700-68-2100kV_YGE160HV_18Timing_14kHz.pdf
@EDFjetRC3 жыл бұрын
I think it would fly nice on 2x 6s Samsung 40T. Approx 50A from each battery. You could push full throttle quite a lot. With bellow 40A per battery you can fly full throttle from takeoff till landing.