9 Minute Tint Job - Start To Finish - Dodge Ram 1500

[@KingJKickz]

He didn't say one word but explained it better than everyone else . Real time video I love it

[@King_drew]

Facts

[@stupidsedan]

I agree 💯 all that explaining with words throws you off like nobody wants to hear your way of doing it, I want to see the correct way to do it, and then I’ll figure the rest out by myself

[@trentryan27]

I like it, no over explanation, actually no explanation at all, just shows what has to be done

[@daetravel4099]

oh...i forgot to mention this...i ve seen bunch of videos bout tinting. and i think u r the best....dude ur job is just crazy...pure perfection. respect!

[@halseyballistic]

This is exactly what I needed to see, with tinting with the window visors! Awesome job my tint friend

[@R-A-H_-]

Me too! I don’t want to take mine off because I’m afraid of peeling my paint off my car

[@OJtheOZ]

Lol that's what I'm thinking too, I'm a total begginer to this and my first tint is on a car with window visor, it's confusing at first.

[@yung-megafone]

I just put my window vents on 2 days ago without realizing I still have to install the tints. Glad I found this as well

[@humbertourias69]

X2

[@saulsepulveda7235]

Thank you for all of your well explained tutorials. I went from basic tools to back window shrinking. I have successfully tinted a few cars and even make some money. I hope some day I can shake your hand and buy you luch. I Wish you the best . !GOOD JOB !

[@doomers5919]

forget the interview , lets go for the work , this what I've been lookin for.

[@shalsenburgerwhatsinaname1036]

yeh!!, what a cool dude, no bullshit, best tint video, i was put off by other 'pro' vids till i saw this. cheers for this, gona do it 😀

[@rickss69]

Props to cleaning everything before beginning...not just the windows, but the body panels/door frame as well.

[@laminsanyang5811]

This is new job am doing in Qatar am new in the system on training but watching sir is helping me a lot the work system are little bit different I enjoy watching u

[@WindowTintWarriors]

it all depends on the vehicle you are tinting. If the inside gasket is much lower than the outside gasket then you will have room to do the shrinking on the inside of the glass.. If the window is really curved and has alot of fingers (bubbles) to shrink then i suggest shifting the tint upwards about 1/8th of an inch leaving a small gap on the bottom when the tint is on the outside and shrink it like that. it takes practice to learn how each car differs but just keep trying and it will become second nature. best of luck to you!

[@Minervagunsmithingllc]

do you have any vids of you tinting quarter glass?

[@WindowTintWarriors]

Trillo's Auto Detailing I will make one within 2 days for you and go into great detail. Appreciate the request.

[@Minervagunsmithingllc]

PlatinumTinting Awesome thanks a ton for doing that, been looking into offering tinting as a another service, you do great work so i figured i would learn from you

[@parisgarrido]

He’s my hero I was so stock and frustrating on my car doing window tint, this is best explanation not speaking at all thank you.

[@og_mcnastyy8985]

Ive been struggling on tinting windows with the annoying visors and your method just helped me so much. I wasted so much material. And the more and more i learn off here im mad at the “instructor” that i learned from

[@TheodoreRizzo]

The best instructor is yourself. Not sure why you had to have instructor to learn a simple skill. Couple of good tutorials on KZbin like this one and you set.

[@og_mcnastyy8985]

@@TheodoreRizzo I went to a trade school for pdr, paint correction, wheel repair, etc. they asked if I wanted to learn to tint windows at no extra cost since I was in the other courses. I took their offer. This is also probably why the instruction was bad lol tinting itself is very simple and easy but there is still little tricks like this you only learn from experience

[@justinmiley8778]

good job big dog. keep it simple. clean lines. wish there was a dude like you in my area. never enough good help around

[@Vendredi_Sur_Mer]

Perfect. I understood everything, even without any talking.

[@Alpine7163]

Dude your skills are sic ! I feel sorry for anyone trying this for the first time expecting the same results lol !!!!!

[@jperdue3567]

Only difficult part about what he does is keeping a steady hand for his precision cuts. Lol Definitely helps having a clean garage/work space and not being outside in the winds and dirt.

[@Hogib35]

I got the same results as him.. for the first time,years ago. Now I'm actually considering doing this as a career. Super fun work. This man is great.. great speed and all.. confidence and patience is key

[@stupidsedan]

Great Job man thank you for the demonstration, I wrapped the front end of my g35 and I want to learn tinting now, gonna give it a go and see where it goes from there

[@LupeMorquecho-kk7tn]

Good job. And clean.

[@bruhmoment475]

I'm just learning to cut I worked with my uncle and dad your videos help me work out the little things about cutting thanks a bunch

[@catrinamwillis754]

Excellent job what I was looking for all show no excuses time with explaining every step

[@SpaceGhost999]

Anyone that's into cars has tried to tint their windows before. And anyone that's tried to tint their windows knows the best way to do it is take it to a professional.

[@dennisbasco5605]

wow you made that look easy but thats the best tint job i have ever seen

[@michaelharrison4066]

You're that great you making it look so easy! I'm doing a bit on my vehicle...started with cheapest film available a tinter on here say if you can learn to fit the cheapest good you can get good. Great video 😎

[@misteranderson777]

Much respect to the detail involved. Wow! Never trying this myself! Need to ask: Who clicked on this video thinking the whole truck was going to be done in nine minutes?!😂

[@Ocboy420]

Dam this is an old OG tw video I just had pop up on my feed lol.

[@beefchimichangaSalvo]

I tried doing my fronts. Nope! Paying to get them done 😂

[@aerysroy2513]

Dry fit to your outside , trim & apply .. got it

[@loboxx337]

Ten years later, excellent.

[@Keithkahwai.gmail.com.Tichman]

That's wht l needed...thanks guy

[@jboyuknown6169]

I thought u would do the back windows as well

[@starfox2795]

Nice I just got my Windows done today on my 2012 crew cab 20%on the two front 5%over 35% on the rear and back 2Windows

[@edwinbab705]

For car that always on the road is ceramic better or what is better and I want easy install myself

[@briansmobile1]

Very little talk and a lot of action!

[@WindowTintWarriors]

appreciate the support

[@liewkinhean]

got date later on

[@mikejohnson479]

Before I saw this video, I tried a side window on my van. Not well. I wrestle, getting the clear started separating from the tinted part. And here he kisses it open. How do you do that? Any tips on corners that won't stay down? It has those little black dots (tint?) around the edge.

[@acsaiyanbalce4610]

Nice, quick and very neat job..

[@King_drew]

Excellent video! Just fantastic! Students paid attention to your methods and tools. Those who care, will rememeber !

[@brandondebroy1955]

Hey man can u clear something up real quick? I noticed sometimes you cut the back of the film first and sometimes you cut the front first? Does it matter? Also, sometimes you shift 1/4 inch forwards and sometimes you shift a 1/4 inch backwards? Thanks alot man love the videos they deserve way more views!!

[@champagneshowers1486]

Awesome vid once again. Keep them coming. We all enjoy your videos they are so informative. Most tint youtube channels upload a couple vids then just stop for some reason but im glad your different so thank you. My question is. Im having a difficult time with front window strips. Is there anyway you can do a video based on that? Thanks man keep em coming.

[@WindowTintWarriors]

We really appreciate your commitment to our channel as we do our best to educate the world of window tinting enthusiasts with the spare time we have when we are done working our long busy days

[@jayelpea]

PlatinumTinting Very nice job and good speed. Hey i bought some solar gard smoke hd 35% tint off from metrorestyling tinting, im not sure why but i did the same steps you did from preping the window and razor bladin the surface to cutting and shrinking to squeegee out water and i also have the j&j baby solution mix. anyhow i dont know what i did wrong or what went wrong when i finished my tint job, i wonder if you ever came across the same situation as me. I'm hoping you can give me some adivise or tips? So when i finished squeegeeing out the water with my cheap ebay squeegee i saw like a hazy foggy tint view from the inside and it looked ugly, and around the center (of my driver side) window there was like a few clear tinted stains. Thanks for reading hope you can help!!

[@scbeach1]

Thank you for your video I stuggled with rain guard lol 🤣 cut film too short. I'm beginner level still learning.

[@Torchsizzle]

I’ve been doing it for a while and man I take MINIMUM 30 minutes on side windows

[@14infallible]

Very very good. Clean and fast.

[@rammsteinfan1982]

Wish I had the skills to tint that efficiently. Takes me a looong time. But I'm only a brofefessional not a professional

[@michaelt1644]

Can you make a video on how to tint a rear windshield that has a spoiler obstructing it

[@kevinkemble3718]

There we have it!

[@OHSOOOFLY]

Nice work. Everyone else cuts the top cut last online - I must be strange doing it first and rolling the window upto cut the rest...

[@killertofu]

What are you spraying ?

[@kesodabul]

When you gotta slide real quick and need the tint... this is who you go too.

[@skylash4396]

What a beast. 🙌🙌💯🚀

[@aveshenchetty5968]

You make it look so easy bro👌

[@Time4War]

Thank you! Nice video!

[@JongTausug]

Nice video.. Do you use special chem on your sprayer ? And do I need special tools too .? Thanks.

[@jasonanderson4749]

Did you do this tint job in a warm temperatures or no cause I am afraid of the tint not sticking well being to cold

[@abdullahiauwal1526]

Good job

[@coleytoons]

Nicely done dude

[@waynephillips2024]

Love the vids you definitely made quick work of that.

[@wilsonfan6712]

So you don't need to tuck any film below the door sill molding, correct?

[@jakerz9661]

Bruh not one word... but taught alot.

[@MrEzplay]

Where can I buy the same tools that you are using? Great job! Thanks!!!!

[@melvinthomas6901]

Nice work

[@jaygee1616]

Great job….but that’s one window in 9 min title is misleading

[@VictorMy7]

Muy bien, este video me sirvió porque mi carro también tiene deflectores en la puertas...

[@majestic9104]

I'm fairly decent at tinting windows but I never thought to use the squeegee as a straight edge lol

[@tboy521]

What kind of cloths or towel do you use? And I've been watching your videos and your damn good. I want to get into tinting myself have any tips for me? It'd be awesome if I could touch base with you on some more questions. Keep up the vids man. Got yourself a new subscriber

[@jperdue3567]

Unfortunately Tyler, people don't ever have the time to teach anyone these days. If he actually made contact with you and helped you along I'd be shocked. Yet these are the same people that cry about products being out sourced and cheaply made instead of passing their knowledge on to try ensuring a quality job. SMH Good luck bro.

[@thesouthernlife4061]

@@jperdue3567 hes teaching you with these very videos

[@jperdue3567]

@@thesouthernlife4061 so you're telling me that by this video he taught you that you need soapy water? Did he mention that you need to be sure that the side with the film should be facing out when you trim along the edges of the window and cutting to fit? Did he explain that you need to be sure to wipe from the center out so to not create air bubbles in the tint while you're applying it? Hold up, I think I heard him say he uses the heat gun to "shrink" the tint or help it to form bett...... Nope my bad, he hasn't said Jack shit. He damn sure didn't explain to be careful to get the edges on the tint down below the window molding and secure so it doesn't peel up on you. Point is, one can learn little to nothing from this one specific video. Be mindful not to open your mouth and respond when it's not necessary. SMH fucking moron

[@tintmaster167]

I'm very impressive, everyone has a different way to do it

[@WindowTintWarriors]

tint master 5 year old video. Thanks for watching. In response to your comment; I am very impressed that everyone has a different way to do it. Every installers technique is unique to their style of installation. Different installers could get the same exact result with completely different approaches and executions of prep, cut, and installation. Now that to me is extremely impressive.

[@tintmaster167]

@@WindowTintWarriors sorry but I was trying to say : im very impressive

[@FadeToBlackLLC]

Very informative video, thanks

[@MrEzplay]

And what kind of film would you recommend?

[@DarnellGandy]

What tint is that

[@k300zx]

I like how fast you go, do you do this full time or part time?

[@WindowTintWarriors]

full time

[@allmotordc5rallmotorfa575]

Nice job. Us tinter's call this meditation. Lol

[@chriscastro1939]

great vid thumbs up

[@JB1O]

What film or water soap mix are you using? I saw you used no heat to shrink the film, but only at the end to tack it down?

[@emilianozapata1954]

Hey bud great vid. I see other window tinters that sometimes they mold the film to window by creating fingers then shrinking them, you did not do that in this video ,so my ? Is how do you know when to shrink the film when doing the side windows??

[@liewkinhean]

only curve window got finger....

[@dansmith1077]

What's in bottle ?

[@granthenry4326]

missed the dirt spot after the commercial?

[@daetravel4099]

great great video. if u don't mind let me ask u a question. if someone like me who has no background or knowledge about tinting is about to start business. how long and where should i learn this job? i have been searching every way to get started but so far no one tries to teach me how to do it. even i said i can work for u for free. i contacted one company that offered tinting training class but they charge me 900$ for 2days course...i am in australia and keen to learn it. could u tell me where should i start?

[@liewkinhean]

just learn from the youtuber and watch all their video.. and start tint your car

[@4evalazy]

Bravo 👏

[@jerryjaworowski]

a quick tip to help a fellow tinter out. pull up 24in on the roll.cut off then put on glass much easier. i also tape the felt on dodges. i also pop the panel. super easy takes about 20 seconds

[@JBIRD575]

Great videos bro

[@whzgud_]

What were the tools used

[@calvink3081]

How do you decide to shrink with the tint outside or inside the window? You do both in your videos

[@liewkinhean]

flat window no need to shrink

[@B711HD]

He make it seem easy for the one with rain guard 😭

[@scottlittlefield9738]

Nice job

[@RichGarciaTv]

u make it look so damn easy

[@alexishenriquez3590]

Era justo el video que buscaba muy buen trabajo 👍

[@valentinreyna23]

very useful video ..thanks alot

[@WindowTintWarriors]

Valentin Reyna your welcome. Feel free to message us with instructional video requests.

[@SlaysTheDay]

Why did you start cutting the release liner? Was there a particular reason? Just curious

[@Fafo_daddy]

Tim Quinn so it doesn’t collect dust from the panel on the door while it’s resting on the panel while doing the top???

[@SlaysTheDay]

@@Fafo_daddy Usually that's accomplished without cutting it at all and leaving it uncut keeps the film further away from panel dirt and out of the hundreds of top loaders i've seen he's the only time i've seen it cut. I think cutting it would have more to do with less creases at the sides where the liner would likely push it further away at the side stripping and make it crease, which is not uncommon with top loading. But this Sean dude bottom loads everything now anyway.

[@michaelt1644]

Good shit bro

[@nikolarakic4749]

Amazing, great skills

[@samisami5358]

What’s the reason to keep the entire40 inch film there? Before I learned about splicing, I would do the same but always cut the top and put away for the next window. It gets in the way and can create creases or pintch points even if you’re a pro.

[@caylenegladden2557]

This guy can tint some fucking windows. 👏🏻

[@Magnuss0724]

What is that he is spraying

[@daetravel4099]

could u tell me how u tell when to take door trim off? most of cars u don't take door panel apart. but for few cars u did it on video. i hope u can tell me the difference. thx in advance. ur video is really great. i do appreciate ur kindness. i am from melbourne australia and i got a lot of inspiration from u. thx again

[@SofaKingTouge]

I'm thinking of starting up a tint business and wondering where I can get small rolls for learning. Seems they want you to buy these huge rolls. Until I have it down and hire some good people to train I see no point in doing a 3k purchase of window tint.

[@WindowTintWarriors]

OutlawUniverse email me- [e-mail] I'll take care of you

[@SofaKingTouge]

Window Tint Supplies awesome man thanks.

[@liewkinhean]

start with the cheap tint first order online from china

[@JeosvanySanchez-mf3pf]

No heat shrink

[@hemihesston]

Why did you not have to shrink it

[@emilianozapata1954]

Hey bud, what year is that dodge ram you tinted?. I have a 02 just tinted it today but the gasket on the outside was wider towards the bottom on the long side of the window it was weird as hell I had to cut from the middle of the glass and up, Anyway great videos I hope you have time to make a rear window some time... good luck

[@WindowTintWarriors]

The older ones are weird like that but I believe this was a 2010+ where the glass doesn't come out of the back edge as much as the older models do.

[@emilianozapata1954]

Ahhh Ok that's why Ok cool thanks man.

[@eddyrobertson9677]

two big air spot at the top... Other then that. Cool...

[@traxxasbatteryPro]

What grade of tint is that 50%?

[@gshffr]

what brand of tint are you using? looks like it's great to work with! excellent job my man!

[@WindowTintWarriors]

we use and sell suntek window film

[@alexegus71]

You are ¡¡¡AWESOME!!!

[@AA-tc5if]

Hundreds of videos on how to do the front window but none on the rear windows

[@WindowTintWarriors]

All of my vehicle specific videos include the rear window tinting. Check it out

[@AA-tc5if]

@@WindowTintWarriors I found another video where you tinted the rear window. Thanks ! You sure make it look easy !

[@WindowTintWarriors]

Awesome 🙌🏼 thanks for watching