9 OUT OF 10 TIMES This Is Why A Chainsaw Does Not Oil The Bar And Chain (edited version)

This video shows you the most common problem with a non-oiling chainsaw AND how to fix it! Simple maintenance will save you a lot of money in the long run. ✅CLICK HERE FOR A BAR CLEANING TOOL ➜ amzn.to/3oTL6xj . This is a condensed or re-edited version of a previous video to include only the repair information. If you would like to watch the full version with movie and TV celebrity, Sarah Wayne Callies including the "interview" parts, here is the link ➜ • Prison Break, Sara Tan...
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
For more videos like this, check out:
👉How To Fix A John Deere Chainsaw That Will Not Oil ➜ • How To Fix A John Deer...
👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ • CORRECT WAY To Adjust ...
🔧WELCOME to the Steve’s Small Engine Saloon KZbin channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmall...
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmal...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #chainsaw #stihl #husqvarna #chainsawrepair #stihlchainsaw #husqvarnachainsaw

[@StevesSmallEngineSaloon]

✅CLICK HERE FOR A BAR CLEANING TOOL ➜ amzn.to/3oTL6xj ✅To watch the full version with movie and TV celebrity, Sarah Wayne Callies ➜ kzbin.info/www/bejne/p2S0fYZjhb6ZbpY For more videos like this, check out: 👉How To Fix A John Deere Chainsaw That Will Not Oil ➜ kzbin.info/www/bejne/nquke6yql62mrqM 👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ kzbin.info/www/bejne/g2e3Zn2lfL2Wfrs You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

[@allanhughes7859]

This format is the best lecture you will ever get someone that knows little and some one that knows a lot one asks all the questions the other then has to give the answer 110% great keep it going !!!!!!!!!!!!!!!!!!!!!!

[@StevesSmallEngineSaloon]

Thank You...

[@superman9772]

you know what's great?...when a machine breaks down in the middle of a job and you're stressed and angry and so you get on youtube looking a quick diy video and you find a guy drinking a beer and explaining the solution to your machine in a fun way so that you can fix your machine without blowing up your shop and machine... anyway, the best part of your videos is that they demonstrate the importance of : stop, get a beer, chill a little and then go back and fix your machine and life is good... appreciate it there Steve...

[@robw9435]

Yep, Steve found a heck of a niche and is filling it nicely.

[@jasonhoward8710]

Nothing wrong with a little air with eye protection to do a final clear .... and air can make the end cog if you wonna call it sing throwing off any debree as well then give it a bar grease injection and turn by hand adding a little pump of grease every 90 ° rotation to help it get in there ... no more air needed when greasing. Add chain and put it back on chain saw 😊👍😎 love ya videos cheers jp

[@mattwaters6987]

Great information Steve. Many thanks to you and your awesome hostess! Cheers! 🍻😊

[@kostas010151]

After cleaning the bar with a proper tool, from the front to the back, I always clean the tip with air pressure, so that the sprocket rotates freely with its characteristic sound. Thank you Steve for your valuable information and advice!

[@Mackeson3]

Me too 😉

[@mr1pearl]

Sarah welcome back , Steve you gotta bring her back more 👍

[@thomasfriedmann8522]

Sarah and Steve. What a great combination. I attach a zip tie to my scrench so that I have a “ soft” clean out tool in the field. Every time I take the chain off I can clean the bar.

[@StevesSmallEngineSaloon]

Sounds great!

[@seanhamilton4175]

Ok, doing that right now 😂

[@inkydoug]

Ok, I have been destroying my bar and chain with neglect. Always good stuff here, every time, thanks Steve.

[@StevesSmallEngineSaloon]

You're Welcome...

[@JohnR9965]

Lube is very important!! She knows it.

[@BigDmike24]

Natural lube is the best. I'll stop there.

[@robertmailhos8159]

Sarah got it going on with her knowledge of the bar and chain non oiling problem,s you go young lady 💐🌹

[@StevesSmallEngineSaloon]

Love it!!

[@robertmailhos8159]

@@StevesSmallEngineSaloon yeah buddy 😂🤣🤪

[@matthewbusch7963]

Excellent coworker! Excellent information and video! Thank you!

[@StevesSmallEngineSaloon]

Our pleasure!

[@fierohoho]

Awesome good fun when you two are together! I wonder if either of you two could get through a video on leaf blowers that don't blow with straight faces.

[@StevesSmallEngineSaloon]

IMPOSSIBLE!!!!

[@ted605]

The honey keeps going there, not him

[@jaywesselink8709]

I always keep an old used up gift card in my bag to clean the channel in the bar. It is a tip I learned from an arborist friend years ago.

[@StevesSmallEngineSaloon]

Thanks for sharing!!

[@carldaniels4827]

steve and sarah, even though the hole and track were scraped clean would you want to use the air pressure hose to blow any hidden particles out?

[@StevesSmallEngineSaloon]

Certainly would not hurt!

[@michaelspencer301]

I do ! It helps to remove all smaller particles. After I square and debur the bar rails it is imperative to blow out the tiny metal piece's that have been removed. Grease the tip and your ready to go.

[@larrymoberg3249]

Soooo, you must ensure all the moving parts are kept moist! 👌

[@michaelspencer301]

@@larrymoberg3249 Absolutely ! Plenty of Lubrication for rails and tip. That's why you need to clean bar on occasion . When we ran chainsaws in the woods 8 or 9 hrs a day that evening they were cleaned completely and bars were turned over to allow even wear on the rails.

[@f5tornadeau]

@@larrymoberg3249 yes. In a pinch if you don’t have oil, just spit on it…

[@michaelpavia7964]

Great humor. I hope you do more of these together. Thx

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@ronwatson4902]

Another gold nugget Steve and I wish I had the perfect words to impress Sarah. An incredibly intelligent,beautiful and talented woman.And then I heard her sing and I thought I would pass out. Ok that's it.

[@StevesSmallEngineSaloon]

Right on Ron!

[@GrowLLLTigeRRR]

This is the first of your videos I've seen with Sarah in it. I'll be watching them more now.

[@StevesSmallEngineSaloon]

Right on

[@josephrich6014]

Nicely done. Love Sarah's jabs.

[@StevesSmallEngineSaloon]

I agree!

[@stevenchandler4218]

Hey Stevo good to see you Canadians have your minds in the gutter like most of us Aussies LOL! Another good video to man 👌

[@StevesSmallEngineSaloon]

Hey, thanks

[@Mackeson3]

@ Steven Chandler There used to be a Canadian comedy sketch show called "Bizarre" which was shown here in The UK too. This was in the early to mid 1980's and believe me what was said on there at times certainly would not have gone down well south of The 49th parallel I think!😮

[@beast1624]

Thanks so much for sharing, Steve & Sarah! Been using chain saws for 40+ years and never knew to clean the port hole on the bar.

[@StevesSmallEngineSaloon]

Our pleasure!

[@killer2600]

Seriously? Used a chain saw for 40 years and no one ever taught you maintenance?

[@stewartfenton7660]

Good stuff Steve. I've only got a little saw now I'm retired, firstly a Stihl 181,now I have an Echo 310 something. C310? I keep forgetting. I've finally come to realise that if I'm pushing it hard, cutting a 70 cm trunk with a 35 cm bar, the little saw isn't going to pump enough oil while the chain's buried in the middle of the trunk, getting hot. The pump malfunctioning on the Stihl, didn't help. So the chain's running dry and suddenly I find it's still running straight, still cutting well but it's sticking in the cut. Twice at least, to my cost, the chain and bar have looked NO different, and when I've let them cool down, and checked there's oil coming through, and it's still sharp - the thing still sticks, and I've had to replace both bar and chain to get it to work again. Any ideas? What am I missing? I'm not a newcomer to saws.

[@david-wi2wh]

Steve and Sarah, Thank you. Funny and informative.

[@StevesSmallEngineSaloon]

You're Welcome...and Thank You...

[@Millstone_Firewood]

Great video! Don't forget to cover the "not so easy" repair of the actual oil pump and worm drive. Just did that on my Stihl 064 a few weeks ago.

[@thomask4836]

You guys crack me up! You make a great team!

[@StevesSmallEngineSaloon]

Thank You...

[@courtneyroy270]

Enjoyed the( hole )of that show thanks steve

[@martylost167]

And flip the bar when you put a new chain on or the chain comes off the sprocket. . The OREGON # 13616, Stens 700-807, Tecomec1017001 or china bar groove cleaner is a must. I wipe the bar down, take the tool point, rake the groove out and then clean the oil hole. Once done, I put like 1 tablespoon of bar oil on the bottom of the bar so it can run into the chain, then take the wrench and pull the chain about 2 cycles. This helps set the chain and now your ready to adjust. You can also run the saw med-high while pointing the tip of the bar towards paper and very the oil prior to cutting.

[@johnswartley7104]

What a great team!

[@StevesSmallEngineSaloon]

Thank You...

[@craigduffield3963]

Thanks Steve,that was helpful to my problem,thanks to Sarah I will remember to keep plenty of lube on my bar and not all holes are the same size

[@StevesSmallEngineSaloon]

Excellent!

[@geoffreywilliams5234]

Everything you do is awesome. You have taught me so much. My mowers and saws thank you. Keep it up. Rock on

[@StevesSmallEngineSaloon]

Thanks, will do!

[@alexandersalden1476]

I had trouble with mine the day before this video came out and I was wondering if you made a video about this subject. Thanks again!

[@StevesSmallEngineSaloon]

You're welcome!

[@BobWhite777]

That was the problem with my Craftsman 4218. Cleaned out the bar and now it is oiling as it should. Thanks!

[@StevesSmallEngineSaloon]

You're Welcome...

[@joefudd]

This is why if you ever run the blade down into the ground (cutting out a stump or roots) it always clogs the oil flow, drags the saw speed down, overheats the chain, then you see smoke and sparks coming from the chain and bar. I HATE when I have to remove the bar, clean out the soil and then have to resharpen the chain just for a few seconds of having to cut into the dirt or accidentally cutting into the ground! Sarah is a hoot with the zingers!

[@StevesSmallEngineSaloon]

I agree!

[@raincoast9010]

There's no blade on a chainsaw...

[@joefudd]

@@raincoast9010 yes there is. Many of them on the links. DUH

[@joefudd]

@@raincoast9010 yes there are many on the chain links. DUH

[@Swamp_Lad]

Yes pure hate from me too. And pure love for Sarah she is a gem 💎

[@jamesadams2333]

Oh I love these two together! This is already an amazing channel but you two together are hilarious! I hope to see more! 🙃

[@StevesSmallEngineSaloon]

Yay! Thank you!

[@wrongfullyaccused7139]

Took your advice about running my lawnmower dry at the close of the season. Worked perfectly. Thank you. I am trying to find out what oil is safe to use in my Makita 6" cordless chainsaw. The bottle that came with the saw is very small. I need to find a suitable substitute. Any suggestions will be greatly appreciated.

[@waynemark93]

Steve, and Sarah, that was fun! 😆😆 I've been writing my own jokes! Seriously, good video!

[@StevesSmallEngineSaloon]

Thanks! 😃

[@nzmarkb8713]

Glad to know you try and keep your channel clean Great information as always 👍👍👍

[@markschehr5036]

Hi Steve, love your videos! You've saved me many times! I have a Stihl MS180C that's not oiling. I've done what your video advises, but did not help. Do you have a video on replacing the oil pump & feeder hose? I tried looking, but couldn't find one. Should I be able to see the oil hose & filter inside the oil reservoir on this unit? Can't see it at all, so maybe it's kinked where it enters the saw underneath ??? Thanks in advance!!

[@drmautz]

You seem to be ignoring your beer in recent videos. Remember it's a saloon. Good video

[@Patrick4959]

top stuff Steve and Sarah and yep plugged oil port holes are one way to ruin a bar and chain for sure and yep luckily i don,t let my chainsaw get plugged in the hole.

[@StevesSmallEngineSaloon]

Right on Pat! Thank You...

[@Patrick4959]

@@StevesSmallEngineSaloon my pleasure mate.

[@kyronwagner9015]

I can’t wait to go out to my shop and try this. Thanks

[@StevesSmallEngineSaloon]

You're Welcome...

[@RaleysSmallEngines]

OMG Too Funny. Great job Sarah and Steve.

[@StevesSmallEngineSaloon]

Thank You...

[@wallyschloeffel1678]

Another good video Steve and Sarah, but I noticed you didn't check to see if the nose sprocket was spinning freely. Perhaps you had already covered this in a previous video I haven't seen yet

[@karlschwab6437]

Enjoyed the video as it is a bit different. Thanks Steve!

[@StevesSmallEngineSaloon]

Glad you enjoyed it

[@kendean4278]

Learned and laughed. Great for a Friday

[@StevesSmallEngineSaloon]

Glad you enjoyed it

[@richardybanez9052]

Lubrication/Squirt/Ball Bearing. Let The Joke/Punch Line Begin. Richard.

[@Hoaxer51]

Hey, another great video. I always fill my bar oil tank every time I fill up with gas, it only uses maybe 3/4 of a tank of oil to a tank of gas so I should never run out. The few times that I have run out, I could tell almost immediately that I wasn’t getting oil to the bar. Whether the tank ran out or the bar plugged up or whatever, I could tell right away so pay attention to the bar and what’s going on when you’re using a chainsaw. Thanks for sharing, keep them coming!

[@chrissnyder3479]

Lol my old echo has an adjustable oiler and I go through 2 tanks of oil to a tank of gas. She’s flowing.

[@jmbettle]

She is an absolute Hoot!!! love her!!!!

[@StevesSmallEngineSaloon]

Thank You...

[@11mchristo]

My favorite part is the nympho sidekick.

[@klcflyer]

Every time I start my chainsaw (and let it warm up) I run the chain while holding the tip near a log or the ground to make sure I see a string of oil. If I don’t see that then the bar and chain come off and I look for the problem. Love your videos BTW.

[@StevesSmallEngineSaloon]

Great point!

[@benfauber388]

Holes, tightness, lubrication, squirting, and smooth, slippery grooves. Chainsaws are so exciting!!!

[@StevesSmallEngineSaloon]

Right on

[@richnorman5017]

Watching your video Steve on this would solve so many oiling problems and issues. Comes down to seeing the signs (blued bar, worn chain, dry chain)… proper maintenance and care. 👍🏻👍🏻Steve!!

[@StevesSmallEngineSaloon]

Thank You...

[@mattwaters6987]

Great information Steve. Many thanks to you and your awesome hostess! Cheers! 🍻😊

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@diegozimmerman8261]

YES I do like Sarah Wayne Callies and I gave up on the clean jokes!!

[@altemose_prime]

Thanks for some great information. My chain was sparking. Now I know why.

[@StevesSmallEngineSaloon]

Glad it helped

[@bigrog572]

Thank you Steve for your knowledge on fixing all the stuff u fix especially the little secrets you give they have especially saved me money 👍

[@StevesSmallEngineSaloon]

Glad to help

[@vendbiz8076]

1:16 🤣🤣🤣 “tight from lack of lubrication”

[@StevesSmallEngineSaloon]

LOL! Sorry aboot that Eh!

[@billypitts6368]

@@StevesSmallEngineSaloon Dont be sorry, we need a little humor in our lives.

[@shanesmaineshop]

She is a riot. LOL great video.

[@StevesSmallEngineSaloon]

I agree!

[@dougweir441]

More Sarah. Very nice on the 👀

[@StevesSmallEngineSaloon]

I agree!

[@jsmith9255]

Thanks for the info on saw not oiling bar and chain

[@StevesSmallEngineSaloon]

Glad to help

[@jamiecrisp5084]

Hi Steve i run pole saws with 12 and 14 inch bars and i clean my bars and saw heads after each use and also flip the bars after cleaning great thing about long bar pole saws is you can reach into thorny shrubs and cut out small trees without getting poked.

[@poolhub89]

Beautiful co-host!!

[@StevesSmallEngineSaloon]

I agree!

[@45-70SBL]

I found the tang end of a dull reciprocating saw blade fits perfectly in the bar for my Husqvarna 460.

[@StevesSmallEngineSaloon]

Perfect!

[@rickthelian2215]

Hello again Sarah, it’s been a long time😀🇦🇺 Hi Steve😀

[@StevesSmallEngineSaloon]

Hello there!

[@almclean4835]

What a team

[@bh1567]

Couldn't figure out my saw, pulled this up. Got bitched at for being on phone. Hahha

[@kyronwagner9015]

So I had to use my chain saw today and I cleaned my bar worked great thanks

[@StevesSmallEngineSaloon]

Great to hear!

[@toddwatzka960]

I thought that was “Sara” from Prison Break. She was awesome on that show. Wish it was still on

[@StevesSmallEngineSaloon]

Agreed!

[@rustymachineshop9456]

Sarah sure seems like a down to earth lady

[@StevesSmallEngineSaloon]

She is for real...

[@TOWNCARBUBBA87]

Hey Steve very informative.thanks to you and your special guest Sarah good job brother. 👍

[@StevesSmallEngineSaloon]

Thank You...

[@michaelguillote521]

Thank you for all your videos it comes in handy From Lake Charles Louisiana

[@StevesSmallEngineSaloon]

You're Welcome...

[@whatmakesyourday]

You bet it does. I still have 18 stumps left to take care of, and there’s still down trees that need to be taken care of all over town.

[@Jabootie-oz1cb]

Check the rails for evenness with a square, they are likely uneven, causing the chain to sit cock eyed, causing the cut to wonder left or right. You can get the rails ground but for the cost of a small bar throw it away. In my Timber Felling days I ran 48 inch Canon Bars. In the early 80's a bar was over $200 so it was worth it to get them trued at least once, sometimes twice and kept it for a spare. .

[@tobygathergood4990]

I use high pressure air to cleanout all the ports, (away from the bearing end of course), then I push a wire trough the ports and give the bar channel a look under bright light and a scrape if needed. I also built an ultrasonic cleaner long enough for a 36" inch bar.

[@BionicRusty]

You guys are awesome. Thank you 🙏

[@biggiefitz6275]

I like the Homelite sign in the back ground.

[@StevesSmallEngineSaloon]

Thank You...

[@MrPolleyr]

How often should this be done, as in hours of use, or types of wood cut???

[@Rolog21]

Thanks!

[@StevesSmallEngineSaloon]

You're Welcome...and Thank You...

[@ralphfrench2924]

Steve and Sarah , not a bar question, but I have an older Stihl 039 , it starts fine I cut a while and the it revs high stalls out , starts right back up , cut a while again, same issue and keeps getting worse. I’ve changed gas line filter, tank vent and air filter. Any suggestions would be appreciated, thank you, love your channel.

[@tomstepanowicz6191]

Excellent video Steve. I did watch the whole unedited version 🖒

[@StevesSmallEngineSaloon]

Right on

[@arwood111]

I just fond your channel a couple of days ago. Thank you for sharing your knowledge! Question; I use a Stihl chainsaw, lately when cutting, the cut will go a few inches into the wood then Thanks chain spins at full RPM without cutting…. Why? Thank you

[@stansmith3700]

Can you use compressed air?

[@rossrossier935]

Great job guys keeping it fun and learning something¡👍

[@StevesSmallEngineSaloon]

Thanks 👍

[@mikep1085]

Thats awesome Steve! Great guest! :)

[@StevesSmallEngineSaloon]

I think so too!

[@YaxisX]

To clean my bar, I use an ordinary office Paper Clip. It is a stiff wire that can be bent out and it slides right down the channel of the bar where the chain goes and cleans out all of the oil-soaked saw dust.

[@mosdephh]

i liked this one i'm not sure what it was about, but she's a keeper !....... ready for more ! A+++ i

[@syntom1]

That explains it thanks

[@StevesSmallEngineSaloon]

You're welcome

[@Saxondog]

Those bar edges will need filing down too after being mullered like that. make sure the edges are square to the face so Yuh cut won't wander off course. Love that slapstick humour of you both. Innuendos rule.

[@Big_Johns]

I was going to make a lube reference but Sarah shut me down by refraining from making her own. 🤣 The possibilities were endless. 😇

[@StevesSmallEngineSaloon]

She asked me who the sexy sounding guy was at the start of the video! I told her that I had no idea....

[@TheLawnmowerLady]

@@StevesSmallEngineSaloon 🤣🤣

[@Big_Johns]

🤣🤣 Yes, he is very hot sounding and probably built to match...... oh wait, I just looked in the mirror.... never mind... false alarm!! 😲

[@jeffreyhall838]

Nice tips!....Thanks

[@StevesSmallEngineSaloon]

Our pleasure!

[@michaelweatherhead9470]

Thanks Steve.

[@StevesSmallEngineSaloon]

You're Welcome...

[@etubrutus3501]

I can’t believe you have tiger beer on your shelf. The last time I saw that I was in the military on an exercise in Singapore.

[@cribbage1686]

Y’all are a hoot.

[@StevesSmallEngineSaloon]

Thank You...

[@mikeysan01]

Hilarious! Steve's a lucky fella! Steve, could you do a vid on winterizing a Stihl chainsaw??? Saw the updated winterizing vid re the weedeater, and no problem re the pre-mix into the gas tank. But I'm not sure what to do regarding the chain oil. Saw one vid which said fill the tank to avoid "oxidation," but it didn't mention oxidation of what. Plus, if I fill the oil tank it's going to leak out of the chainsaw no matter how I position it. (Not sure if that's normal, or just my saw.) Anyway, very curious to hear what you think.

[@billmoore7957]

I was wondering if I could use air pressure n try to remove the trash from the little hole on the bar.

[@jayl6019]

That was all kinds of fun!

[@StevesSmallEngineSaloon]

Right on Jay! Thank You...

[@edgarskkf]

Thanks!!!

[@StevesSmallEngineSaloon]

Welcome!

[@marksomerville1275]

I googled double entendre sexy jokes... and ended up on this clip.. Hi from Australia.

[@coops9871]

She's got a great sense of humour 🤣

[@StevesSmallEngineSaloon]

I agree!

[@mishellgagnon5771]

Keep up this association. It makes for lots of funny moments. There's nothing like perfect lubrication, right?

[@StevesSmallEngineSaloon]

Right on

[@DaddyyCrab]

Always good information and well explained. Thanks Big Steve. 🦀

[@StevesSmallEngineSaloon]

You are very welcome

[@rawkinrobn]

Steve-“uhhhh, what was I saying again?” Lol

[@StevesSmallEngineSaloon]

I know how you feel brutha!!

[@Al_kentingwarrior]

Awesome vid Steve! Mind if I ask how ya know Sarah? Love these videos always helps to understand the topic