Thank you from Derbyshire England

This works EVERY time.. if your generator is not making power, this is the fix.

My gas by the gallon is much, much cheaper than what you pay for it by the liter. The vast savings are worth a few extra moments of math.

How can I adjust the valves of yamah engine ef2600 fw generator

Jack daniels

Ok, so most part i already did good. Not too loose or to thight . Just learned to hold the tip up and why ( you explained it very clearly) So thanks a lot for another valuable lesson. Greetings from a happy mom from Belgium with some skills...Still learning and improving myself. And yess, i do use my chainsaw as safe as possible too.

Excellent Steve....

Good for you! Don't blame you a bit!

Damn good video

Very informative. Learned the hard way not to tip mower with carb facing down (ouch). Haven't had issues (yet) with muffler side down, but thanks for the tip with setting piston at top dead center. Liked your video and your definitely on ny subscribed list. Keep 'em coming👍🙋‍♂️

Do you use heat at all or no?

clear, easy to follow. No fluff!

Another reason you can’t pull the cord is because the engine has seized due to no oil. This happened to me in my craftsman m220 150cc new lawnmower. I’m not sure where the oil went as I filled it with the oil it came with and it worked fine until yesterday. Couldn’t pull the cord, after some fault finding traced it back to having zero oil in it. Filled it with oil and hey presto! It’s working again. The original oil didn’t leak or spill out I believe this particular mower burns it away and you need to fill it periodically with new. Hope this helps someone.

Dude get to the point.... you're not funny, you're losing viewers with the bs

You are life saver!!! Thank you.

So happy to hear you say .. 1) consistency size of the tooth isn't as important as ensuring its razor sharp with what i was taught as a crescent 🌘 shape 2)examine the saw chips. made 100% sense. learned sharpening without a guide... now i want to see if i can do better with it. I've always bought chain with the etched guide (as my guide) Love this channel and the way you just get to it .. thanks!

Steve, you always teach me something new. Great video!

Nice job man. Thank you

Hey I got a predator 1800 generator that my friend put the wrong size spark plug in and I believe he has damaged a piston What’s your comment on that

I’m gonna try it😅

Tnank you so much, you saved the day, it worked like a charm.

I had a inline gas line on my 76 outboard Chrysler 105 two-stroke I drain a gas through the winter next spring the engine won't start the filter was plugged because it dried out, I leave gas in the line through the winter now

50:1= 20ml/1lt 40:1=25ml/1lt 25:1=40ml/1lt It's Easy i don't understand why people struggle with this!

Is there a starting point on each screw before you start the blower. I mean do you screw both high and low all the way in and then back out so far before trying to start.

I see you have a copy of Manned Submersibles by R. Frank Busby!! That book is gold!!

Could you use 303 in the pump to protect the rubber seals ?

6 years ago Steve did a video telling ethanol gas contains olefins, and benzine. Olefins is what causes the varnish build up. The alcohol cause the rust in the bowl. Benzine destroys the metering Diaphragm in 2 cycle engines.

Thanks. I spent a frustrating hour trying to get this fixed, with no success. Watch this video, and had it fixed in 3 minutes.

If you go to a station selling non ethanol gas. If there is only one fueling hose for all the different octane gases. Top off your vehicle first to clean the hose of the ethanol gas.

My on-off switch isn’t working either. It doesn’t turn off, and I can turn it on with the switch off.

No way!!! I did this for my pressure washer that had been acting weird for MONTHS!

I have a question..my recoil starter tabs r stuck and i cant remove it from flywheel..any tips on how to get it to retract without damaging it..

At 2:14 , you bought the 3/8" not the 1/2", that's why you need the 1/2" converter. Great tool and video.

Agreed with you on the gasoline part. Alot of people are careless though so its not for them.

its not i and o, its 1 and 0. how much power do you want? one power, or zero power?

This is the only video that helped me figure out how to tighten and fi x the limp pull cord.Thank you

Spare yourself. Miller High Life is the bomb. Just saying LOL.

instead of gasoline….why not something safer like brake cleaner

Instructions not clear managed to damage the steam with in the tyre 😂

Thank you, runs like a new saw !👍

My thoughts, before you even mentioned it, was offer it back, but ONLY IF SHE NEEDS IT. I wouldn't take it back and let HER earn $200 for your work.

😊😊 the sparkplug should a tan or a brown color and most people use a 16OZ bottle of 2 cycle oil 2/5 gallons of gas U still 2 mix it up yourself shake well all of the time ⏲️ 😊 its not made like it use 2 be 😮😮 and all 2 cycle engines U have 2 use 2 cycle oil in the gas or U will lock the engine up they won't run on regular gas only 4 cycle engines cars truck and lawn mower engines and gas tractors the old gas it will do if it even runs if it does it won't have no power 😮😮 OMG 1 31 2O25

Very good.

Been watching your videos, when you get a carb with emulsion tube stuck . Is there an easy way to get it out?

Great video Steve.

Float is level, could o ring be sole cause? Pulled the bowl off and ring was rotted out. My needle is grooved and fits in a metal seat. Briggs 675 on pressure washer. When I tip upside down and blow in the hole, the float creates a seal.

What would it do for air tools ?

Dude called me out as a stihl dealer and mechanic naw I didn't read this years Bulletin but I'm gonna start reading monthly now... in my defense I'm still new however this is the best advice I have gotten is from the channel alone. Thank you all the hard work you do

My Grandpa's had a small engine repair shop he was the best I ever seen at getting a saw running and sharp Entergy would drop their saws off on my Grandpa's front porch he would service them getting them back ready to work 16:10

Sthil two and one file is a good sys tem.