90% gas furnace troubleshooting

[@mblake1601]

You've helped me through some troubleshooting issues making a better tech thanks

[@TaddyDigest]

You're welcome glad to be here and I'm glad to be of help Stay healthy stay happy

[@diyhvacguy]

Awesome Tad, always learn something new from your videos! I just had one the other day the elbow where the pvc connects for the exhaust was sloped slightly the opposite easy the drain was, and was filling up the collector box and getting water in the inducer fan. So I simply adjusted that elbow and all was good again! Cheers

[@TaddyDigest]

Right on brother

[@TaddyDigest]

where are you located?

[@joshuawinne]

I just went through this with one of our furnaces. Thanks man.

[@TaddyDigest]

absolutely thank you for watching 👀 😀

[@mackenziegray2090]

Becareful not to feed the pvc to deep in the condensate pump. I came across a few where it was double trapping itself in the condensate pump.

[@hvacmisadventures]

Cut the bottom at a 45 and don’t have to worry about it anymore

[@loffyg]

Tad got any suggestions for a York furnace about 10 years old that's giving me 4 flashing red lights meaning airflow problem or open fuse. Fuse is good, all vents are open, blower is working but blowing cold air, inducer seems to be working as well but does seem a bit noisy. When the furnace calls for heat the inducer motor runs and nothing else happens. Sometimes if I shut the furnace off for awhile it will start working again for a day then go back to 4 flashing lights again. Thanks

[@TaddyDigest]

check venting and drain

[@SmitHVAC.]

I don't think I've ever worked on one of these furnaces that didn't have a bypassed door switch 😂

[@jaymz0074]

Good video 👍

[@TaddyDigest]

Thanks 👍

[@YTsux24-7]

What manufacturer allows a screen on the vent termination? ¡No bueno!

[@colin4685]

It's not water. It's condesate. Condensing boiler makes condesate.

[@TaddyDigest]

lol 😆 😂

[@TaddyDigest]

Thank you for watching Thank you For your support