Process took 50 minutes... Beginner video.... Ignition lock cylinder video coming next... With hopefully a little better editing
Пікірлер: 17
@paulshamblin62602 жыл бұрын
Just bought an S10 and the passenger door won't lock. Thanks
@qk6288 Жыл бұрын
Very helpful. Thanks. Really like your style too. Good angle, straight to the point no rambling. 🤙🏾
@davidmitchell92882 жыл бұрын
Tools are a good thing
@matthewfredrickmfkrz1934 Жыл бұрын
I love those maxiflex gloves so much next job I get that has those I'm gonna stockpile hella
@stuntmanchevy Жыл бұрын
Yup! 👍 and the green ones are rated for working with sharp edge material 😉
@stuntmanchevy Жыл бұрын
There is a 4 letter number next to the ANSI safety stamp that reflects the spec's for how good it is
@matthewfredrickmfkrz1934 Жыл бұрын
@@stuntmanchevy yes and the number is the size they're like $10 for a couple pairs... if you grabbed a new pair everyday it'd be like a dollar raise if they were sold on ebay or something
@MsSphelps5 ай бұрын
The problem I'm having is the little clip that holds the door lock cylinder place keeps falling down every couple weeks
@stuntmanchevy5 ай бұрын
Damn it, I'm sorry. Sounds like the clip might not be installed correctly, make sure the lock cylinder is pushed in tight against the outside door and it should be pretty tight while pushing on. Next thing could be the clip is bent to where it doesn't provide the the pressure needed to stay in place. Last it could be the door could be damaged to where it doesn't have the support to hold the clip. Good luck and let me know how it goes. 💪👍
@LawrenceEvers Жыл бұрын
Okay but how’s you get the lock clip in
@stuntmanchevy Жыл бұрын
You have to hold the lock cylinder in with one hand and reach blindly into the door and slide it on. Takes a little extra finger strength
@alamoone4465 Жыл бұрын
You didn't show how to pop the clip off of the door to get the lock out that's the part I was looking for
@stuntmanchevy Жыл бұрын
Sorry bro, I tried but the footage from inside the door was too dark. I used a flat head 🪛. It's hard to see and you basically have to work blind on that part. It comes off going in the direction of the front of the truck. Good luck and don't quit! 💪💪
@SpecialFXKing Жыл бұрын
Greatness.
@Domega-ek4vw Жыл бұрын
How did you get the lock out or in?
@stuntmanchevy Жыл бұрын
@ about 3 minutes in I show how the lock sits in the door. It can be a pain to get the clip off the inside of the door behind the lock